ANSI American Society of Sanitary Engineering 1002-2015 Anti-Siphon Fill Valves for Water Closet Tanks.pdf
《ANSI American Society of Sanitary Engineering 1002-2015 Anti-Siphon Fill Valves for Water Closet Tanks.pdf》由会员分享,可在线阅读,更多相关《ANSI American Society of Sanitary Engineering 1002-2015 Anti-Siphon Fill Valves for Water Closet Tanks.pdf(34页珍藏版)》请在麦多课文档分享上搜索。
1、 Anti-Siphon Fill Valves for Water Closet TanksASSE 1002-2015/ASME A112.1002-2015/CSA B125.12-15ANSI Approved: October 2015An American National StandardASSE 1037-2015/ASME A112.1037-2015/CSA B125.37-15Performance requirements for pressurized flushing devices for plumbing fixturesLegal Notice for Har
2、monized StandardJointly Developed by ASME, ASSE, and CSAIntellectual property rights and ownershipAs between The American Society of Mechanical Engineers (ASME), ASSE International Chapter of IAPMO, nullCnull(nullSSEnull, annullCananullan Stannullrnull Association (CSAnullnull (collectinullly nullnu
3、llSME, ASSE, annullCSA) annullthe nullers of this nullcnullent (whether it be in printenullor electronic form), ASME, ASSE, annullCSA are the nullint owners of all wornull containenullherein that are protectenullby copyright, all tranullnullarnull (enullept as otherwise notenull to the contrary), an
4、null all innullntions annull tranull secrets that may be containenull in this nullcnullent, whether or not snullh innullntions annulltranull secrets are protectenullby patents annullapplications for patentsnullThe nullanullhorinullnullnulle, monullfication, copying, or nullsclosnulle of this nullcnu
5、llent may nullolate laws that protect the intellectnulll property of ASME, ASSE, annullCSA annullmay ginull rise to a right in ASME, ASSE, annullCSA to seenulllegal renulless for snullh nulle, monullfication, copying, or nullsclosnullenullASME, ASSE, annullCSA resernull all intellectnulll property r
6、ights in this nullcnullentnullDisclaimer and exclusion of liabilityThis nullcnullent is pronullnullnullwithonull any representations, warranties, or connulltions of any nullnnull enullress or implienull inclnulling, wi thonull limitation, implienullwarranties or connulltions concerning this nullcnul
7、lents fitness for a particnullar pnullpose or nulle, its merchantability, or its nonnullnfringement of any thirnull partys intellectnulll property rightsnull ASME, ASSE, annull CSA null not warrant the accnullacy, completeness, or cnullrency of any of the information pnulllishenullin this nullcnulle
8、ntnullASME, ASSE, annullCSA manull no representations or warranties regarnullng this nullcnullents compliance with any applicable statnulle, rnulle, or regnullationnullInull null Enullnull Snullnull ASME, ASSE, annull CSA, TnullInull nullSPECTInull nullnullnullEEnull, MEMnullnull, SnullSInullAnullES
9、, Onull AnullInullATEnull COMPAnullES, Onull TnullInull EMPnullnullES, nullnullCTOnull, Onull OnullICEnull, null nullAnullE nullnull Anull nullnullCT, InullInullCT, Onull InullInullnullAnull nullMAnullS, Inullnullnull, nullSS, COSTS, Onull EnullEnullES, nullnullOEnullnull CAnullEnull Inullnullnullnu
10、ll nullT nullT nullMITEnull TO SPECIAnull Onull COnullEnullEnullIAnull nullMAnullS, nullST nullnullnullE, nullSInullSS InullEnullnullTIOnull nullST Onull nullMAnullnull nullTA, Onull Anull OTnullnull COMMEnullIAnull Onull ECOnullMIC nullSS, nullETnullnull nullSEnull Inull COnullnullCT, TOnull (Inull
11、nullnullnull nullnullInullnullE), Onull Anull OTnullnullTnullOnull OnullnullAnullnullTnull, AnullSInull Onull OnullOnullnullSnullTInull nullOM ACCESS TO OnullPOSSESSIOnullOnullnullE OnullTnullS nullCnullEnull, EnullnullInullASME OnullCSA nullnull nullEnullAnullISEnullOnullTnull POSSInullnullTnullOnu
12、llSnullnullnullMAnullS, Inullnullnull, nullSS, COSTS, OnullEnullEnullESnullIn pnulllishing annullmanullng this nullcnullent anullilable, ASME, ASSE, annullCSA are not nullnullrtanullng to rennullr professional or other sernullces for or on behalf of any person or entity or to perform any nullty owen
13、ullby any person or entity to another person or enti tynullThe information in this nullcnullent is nullrectenullto those who hanull the appropriate nullgree of enullerience to nulle annullapply its conten ts, annullASME, ASSE, annullCSA accept no responsibility whatsoenullr arising in any way from a
14、ny annullall nulle of or reliance on the information containenullin this nullcnullentnullASME, ASSE, annullCSA hanull no power, nor null they nullnullrtanull, to enforce compliance with the contents of the stannullrnull or other nullcnullents they nullintly pnulllishnullAuthorized use of this docume
15、ntThis nullcnullent is being pronullnullnull by ASME, ASSE, annull CSA for informational annull nonnullommercial nulle onlynull The nuller of this nullcnullent is anullhorinullnullto null only the followingnullIf this nullcnullent is in electronic formnullnullloanullthis nullcnullent onto a compnull
16、er for the sole pnullpose of renullewing itnullnullsearch annullbrowse this nullcnullentnullannullnullprint this nullcnullent if it is in Pnull formatnullnullmitenullcopies of this nullcnullent in print or paper form may be nullstribnullenullonly to persons who are anullhorinullnullby ASME, ASSE, an
17、null CSA to hanull snullh copies, annullonly if this nullgal nulltice appears on each snullh copynullIn anullition, nullers may not annullmay not permit others tonullalter this nullcnullent in any way or remonull this nullgal nulltice from the attachenullstannullrnullnullsell this nullcnullent witho
18、null anullhorinulltion from ASME, ASSE, annullCSAnullornullmanull an electronic copy of this nullcnullentnullIf yonullnull not agree with any of the terms annullconnulltions containenullin this nullgal nulltice, yonullmay not loanullor nulle this nullcnullent or manull any copies of the contents her
19、eof, annullif yonullnull manull snullh copies, yonullare renullirenullto nullstroy them immenullatelynullnulle of this nullcnullent constitnulles yonull acceptance of the terms annullconnulltions of this nullgal nullticenullStandards Update ServiceASSE 1002-2015/ASME A112.1002-2015/CSA B125.12-15Dec
20、ember 2015Title: Anti-siphon fill valves for water closet tanksPagination: 26 pages (xiv preliminary and 12 text), each dated December 2015To register for e-mail notification about any updates to this publication go to shop.csa.ca click on CSA Update ServiceThe List ID that you will need to register
21、 for updates to this publication is 2423800.If you require assistance, please e-mail techsupportcsagroup.org or call 416-747-22null.nullsit nullnullnull roupnull policy o n privacy at csagroup.org/legal to find out how we protect your personal information.TMA trade-mark of the Canadian Standards Ass
22、ociation, operating as “CSA Group”Published in December 2015 by CSA GroupA not-for-profit private sector organization178 Rexdale Blvd., Toronto, Ontario, Canada M9W 1R31-800-463-6727 416-747-4044Visit our Online Store at shop.csa.caASSE 1002-2015/ASME A112.1002-2015/CSA B125.12-15Anti-siphon fill va
23、lves for water closet tanksPublished in December 2015 by ASSE International18927 Hickory Creek Drive, Suite 220, Mokena, Illinois 60447(708) 995-3019Visit us online at www.asse-plumbing.orgisit our webstore at ASSE International18927 Hickory Creek Dr., Suite 220Mokena, IL 60448Tel: (708) 995-3019Fax
24、: (708) 479-6139E-mail: general.infoasse-plumbing.org www.asse-plumbing.org ASSE International 2015Commitment for AmendmentsThis Standard is issued jointly by The American Society of Mechanical Engineers (ASME), the ASSE International Chapter of IAPMO, LLC. (ASSE), and CSA Group. Amendments to this
- 1.请仔细阅读文档,确保文档完整性,对于不预览、不比对内容而直接下载带来的问题本站不予受理。
- 2.下载的文档,不会出现我们的网址水印。
- 3、该文档所得收入(下载+内容+预览)归上传者、原创作者;如果您是本文档原作者,请点此认领!既往收益都归您。
下载文档到电脑,查找使用更方便
5000 积分 0人已下载
下载 | 加入VIP,交流精品资源 |
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- ANSIAMERICANSOCIETYOFSANITARYENGINEERING10022015ANTISIPHONFILLVALVESFORWATERCLOSETTANKSPDF

链接地址:http://www.mydoc123.com/p-430839.html