AIR FORCE A-A-50783 A-1984 SLEEPING BAG ARCTIC SURVIVAL CONTAINERIZED PRESSURE VACUUM PACKED《压力 真空包装型集装箱化的北极生存睡袋》.pdf

《AIR FORCE A-A-50783 A-1984 SLEEPING BAG ARCTIC SURVIVAL CONTAINERIZED PRESSURE VACUUM PACKED《压力 真空包装型集装箱化的北极生存睡袋》.pdf》由会员分享，可在线阅读，更多相关《AIR FORCE A-A-50783 A-1984 SLEEPING BAG ARCTIC SURVIVAL CONTAINERIZED PRESSURE VACUUM PACKED《压力 真空包装型集装箱化的北极生存睡袋》.pdf（6页珍藏版）》请在麦多课文档分享上搜索。

1、A-A-50783A 84 H 7777774 0047374 5 -7, -4d A-A-50783A .22 Oct 84 Supe r sed Ing A- A-5 O 7 8 3 13 Jul 83 COMMERCIAL ITEM DESCRIPTION SLEEPING BAG, ARCTIC SURVIVAL, CONTAINERIZED, PRESSURE/VACUUM PACKED The General Service Administration has authorized . the use of this commercial item description, Sc

2、ope. vacuum packed arctic survival sleeping bag, This commercial item description covers a containerized pressure/ % Applicable documents. of the Department of Defense Index of Specification and Standard (DODISSI The following standard of the issue listed in the issue specified in the solicitation,

3、forms a part of this commercial item descrip- tion to the extent specified herein. STANDARDS MILITARY - MIL-STD-105 - Sampling Procedures and Tables for Inspection by Attributes. MILgSTD-129 - Marking for Shipment and Storage. FEDERAL - FED-STD-595 - Color -. SPECIFICATIONS DDD-L- 20 - Label for Clo

4、thing, Equipage and Tentage, (General Use). (Copies of specifications and standards required by manufacturers in connec- tion with specific acquisition functions should be obtained from the contract- ing activity or as directed by the Contracting Officer). o Other publications. The following pubtica

5、tions are referenced in the commer- cial item description. ASHRAE Transactions, The Influence of Clothing and Temperature on Secondary Comfort, 1973, 7911, pages 71-80, Rohles, F, H., Woods, T. E., and ASTM STP 718, Quantifying the Thermal Protection and C-omfort Characteris- tics of Sleeping Bags,

6、1980, pages 225-236, Rohles, R. H. Jr., and Munson, D. M. Textile Research Journal Vol 32, Moisture Transfer in Textile Systems, 1962, pages 628-723, Woodcock, A. H. Progress in Biometeorology, Effect of Clothing on Bodily Resistance Against Meteorological Stimuli, Vol. J., Part II, Sect, 19, (1963-

7、1975), pages 194-208, Breckenridge, J. R., and Goldman, R. F. Feather and Down Association Inc., An Apparatus for testing the Filling Power of Feathers and Down Under Controlled Atmospheric Conditions, (Sep 1981), pages 8-81, Werthaicer , M. FSC 8465 Nevins, R. G. F . THIS DOCUMENT CONTAINS -6 - PAG

8、ES - Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-I A-A-50783A 84 7779774 0047375 7 A-A-50783A Federal Trade Commission, FTC L5068 Guides for the Feather and Down Products Industry (Oct 19711, Tobin, C. A, Melliand*Textilberichte (English Edition)

9、, Thermophysiological Properties of Clothing Systems, (Dec 19761, pages 73-80, 1029-1032, Mecheels, J. , Umbach, K. H. Transactions of the New York Academy of Sciences, Clothing Design for Comfort and Work Performance in Extreme Thermal Environments, Series II, Volume 36, No, 6, pages 531-544, (Jun

10、19741, Goldman, Ralph F. Order of precedence, mercial item description and the teferences cited herein, the text of this com. mercial item description shall take precedence. In the event of a conflict.between the text of this com- Salient characteristics, 1, Description. The arctic survival sleeping

11、 bag shall be mummy shaped, have an integral and adjustable hood, be zipper opened from the inside -or out- side nd shall have minimum dimensions of 86 inches long and 33 inches wide at longest and widest points. into active containment (container that assures sleping bag containment within prescrib

12、ed envelope even if vacuum is lost) or into passive contain- ment. The container will include necessary i.nstructions for opening, fluffing, and general uselcare of sleeping bag and also have some type of pro- tective cover made of durable cloth or plastic. pressure sensitive vinyl label with black

13、printing attached to the outside of the container, The bottom of the label shall contain identificdtion markings conforming to Type VI, Class 5 of DDD-L-20. The sleeping bag shall be pressure/vacuum packed The label shall be white 2. Materials. The sleeping bag outer shell material shall be 314 ounc

14、e nylon rip-stop GORE-TEX laminated with polymeric film. 1.1 ounce rip-stop nylon material and have a soft and luxurious texture. baffling material is to be at extremely light-weight nylon netting. length (minimum 30 inches long) continuous free running coil type slide fastener with double reversibl

15、e metal sliders will be used. material shall be prime goose down with 80 percent or better down density cluster count and have a filling power rating of 600 or greater per Feather and Down Association, Inc. , and Federal Trade Commission Guidelines, The sleeping bag hood shall have a triple action d

16、rawstring that can adjust either across the neckline or around the circumference of the hood, or both and have a drawstring locking device with a quick release, The sleeping bag container shall be either an active container or a passive container. container is used it shall have some type of lever a

17、nd lanyard that will pro- vide a positive opening when pulled. rivets, screws, and hinges as necessary. If the passive container is used it shall consist of vacuum packaging inside two envelopes of RF heat sealable material consisting of an inner envelope ofVACUGARD 112A and an outer envelope of POL

18、Y-NEX 224 with easy opening pull tab on each layer. Inner shell shall be The A half The filling If the active The container may be constructed using 3. Dimensions and weight, . a. Dimensions, The overall envelope dimensions for the pressure/ vacuum packed sleeping bag and its container, less its pro

19、tec.tive cover, shall be 11 X 11 X 1 314 inches maximum. 2 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-acceptable quality level shall be 2.5 expressed units. A-A-50783A b. Weight. The total weight for the pressure/vacuum packed sleeping bag and i

20、ts container shall be 8 pounds avoirdupois weight or less. 4. Quality assurance provisions. 4.1 Responsibility for inspection. Unless otherwise specified, the con- tractor is responsible for the performance of all inspection requirements as specified herein. may use his own or any other facilities s

21、uitable for the performance of the inspection requirements specified herein, unless disapproved by the Govern- ment. The Government reserves the right to perform any of the inspections set forth in the commercial item description where such inspections are deemed necessary to assure supplies and ser

22、vices conform to prescribed requirements. Except as otherwise specified in the contract, the supplier 4.1.1 Bid sample inspection. Each bidder shall submit a bid sample of one complete vacuum packed sleeping bag for Government inspection. Government . inspection will consist of examination for defec

23、ts cited in 4.2.1.1 and 4.2.1.2. Any visual or dimensional defects or the failure of any test shall be cause for rejection of the bid sample and the bidder shall be considered as non-responsive. materials and the same fabrication procedure as used in fabricating the bid sample. The production item s

24、hall be manufactured using the same 4.1.2 Acceptance of the bid sample does not constitute acceptance of the production quantity. items to determine compliance with the requirements of this commercial item description. The Government reserves the right to check test such 4.2 Quality conformance insp

25、ection. Except as otherwise specified herein, sampling for inspection shall be performed in accordance with the provisions set forth in MIL-STD-105. 4.2.1 Component and material inspection. In accordance with 4.1. compo- nents and materials shall. be inspected and tested in accordance with all the r

26、equirements of referenced specifications, publications and standards unless otherwise excluded, amended, modified or qualified in this commercial item description or applicable purchase documents. 4.2.1.1 Intermediate inspection. Prior to vacuum packing the sleeping The sample bag, it shall be inspe

27、cted in accordance with the table below, unit shall be one sleeping bag, the inspection level shall be S-4 and the in defects per one hundred Examine Design Slide Fastener Co lor Defect Sleeping integral bag not mummy style with hood. Less than 30 inches long, Does not have double reversible metal s

28、liders. Not free running. Not color specified. 3 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-50783A 4 m 7799774 0047377 O m A-A-50783A Examine Defect Dimens ions e Less than 86 inches long, Less than 33 inches widest point. Cons truct.ion and

29、 workmanship Drawstring or drawstring locking device missing. Drawstring locking device not quick release type. Any hole or tear in the sleeping bag fabric. Baffling seam not finished to bags interior. Any open seam which will allow down to escape. inch which will not allow down to escape. Any spot

30、or stain. Any open seam more than 114 4.2.1.2 Examination of the end item. . The end item shall be examined for the defects listed below. The sample unit shall be one complete vacuum packed sleeping bag. The inspection level shall be S-4 and the acceptance quality level shall be 2.5 expressed in def

31、ects per hundred units. Dimens ions Instructions Examine Length, width or depth exceeds maximum specified. Weight not as specified. Instructions on container missing, incorrect, incomplete, or illegible. Construction and Workmanship Easy opening pull tab missing from either layer of the plastic film

32、 container. Lanyard or lever missing from the aluminum container. If passive containment is used, sleeping bag not packed inside two layers of material, Any visual indications of loss of vacuum, such as looseness of the packing materials. Protective cover omitted. Color Not color specified. 5. Perfo

33、rmance requirements. The sleeping bag performance characteristics shall be as follows: a. While wearing aircrew memher type nittens, user must be able to easily remove sleeping bag from container, then open, fluff, and enter sleeping bag. Container opening forces should not exceed 20 pounds. 4 Provi

34、ded by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,- - - -_ - A-A-50783A 89 3777779 0047378 2 A-A-50783A b. The sleeping bag will have a moisture permeability index (im) value of 0.40 or greater as determined in Milliand Textilberichte (English Editor), Texti

35、le Research Journal, Vol 32, and Transactions of the New York Academy of Sciences. c. The sleeping bag will provide overall cold weather protection and comfort using the latest clothing design technology and testing/measuring criteria related thereto and described in Progress in Biometerology, Effec

36、t of Clothing on Bodily Resistance Against Meteorological Stimuli, Vol J. 6. Instructions. The sleeping bag container shall be marked with instruc- tions and illustrations for opening, fluffing, and general uselcare of sleep- ing bag, Such instructions and illustrations shall be on the outside of th

37、e container and be clear and legible. 7. Color. The sleeping bag shall be colored as follows per FED-STD-595. a. Outer shell, Sage Green 834158, b. Inner shell, Sage Green Color 834158. c. Container, Grey Color #16473. d. Container Protective Cover, Sage Green Color #34158, (Requirements for Individ

38、ual Color Chips (3 X 5 Supplements) shall be submitted to the Naval Publications and Forms Center, 5801 Tabor Avenue, Philadelphia, PA 19120, citing FED-STD-595 together with the appropriate Chip Number as shown therein). the salient characteristics of this description and that the product conforms

39、to the producers o*m drawings, specifications, standards, and quality assur- ance practices. The Government reserves the right to require proof of such conformance prior to first delivery and thereafter as may be otherwise pro- vided for under the provisions of the contract. Certification. The contr

40、actor shall certify that the product offered meets a. The Feather and Down Association shall certify that the filling material from each down lot procured by the contractor is prime goose down with 80 percent or better density cluster count and have a filling power rating of 600 or greater. Federal

41、Trade Commision Guidelines. b. The contractor shall certify that the down is in compliance with c. That the sleeping bag has a measured Clothing Insulation (CLO) value of 6.25 or greater, twenty-four hours after opening as determined by ASHRAE Transportation and ASTN STP 718. The sleeping bag shall

42、be packaged in accordance with normal commercial practice and packed to assure acceptance by common carrier and provide protection against loss and damage during multiple shipments, handling, and storage. pliance with National Motor Freight Classification and Uniform Freight Classification. Packagin

43、g and marking for shipment. The shipping container shall be in com- Marking shall comply with MIL-STD-129. Intended use. The intended use for the sleeping bag is to provide thermal protection for an aircrew member under arctic survival conditions and will be contained within the survival kit of airc

44、rew members ejection seat. e 5 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-_ _g_. _ J” A-A-50783A 84 9997974 0049379 q I A-A-50783A Ordering data, Procurement documents should specify the following: a. Title, number, and date of this commercial i

45、tim description. b, Overall dimensions. c. a Marking for shipment. Known acceptable products. Manufacturer Stencel Aero Engineering Corp. Talley Industries P.O. Box 1107 Arden, NC 28704 H, Kach & Sons Division Gulf & Western Manufacturing Co. 5410 E, La Plama Avenue Anaheim, CA 92807 The Prank Tehan

46、. Corporation 1801 East Shore Hwy. Berkely, CA 94710 Custodian: Air Force - 99 Review activity : DLA-CT NSN - Model/Part Number - sz-1 NA 027-820121-1 NA 103 6SB/ 3011AC NA Preparing activity: Air Force - 82 (Project 8465-0897) User activity: Air Force - 45 TYU.S. GOVERNMENT PRINTING OFFICE 1984 - 505.038/A5169 6 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-