ABS 126 NOTICE 3-2018 GUIDE FOR BUCKLING AND ULTIMATE STRENGTH ASSESSMENT FOR OFFSHORE STRUCTURES.pdf

《ABS 126 NOTICE 3-2018 GUIDE FOR BUCKLING AND ULTIMATE STRENGTH ASSESSMENT FOR OFFSHORE STRUCTURES.pdf》由会员分享，可在线阅读，更多相关《ABS 126 NOTICE 3-2018 GUIDE FOR BUCKLING AND ULTIMATE STRENGTH ASSESSMENT FOR OFFSHORE STRUCTURES.pdf（1页珍藏版）》请在麦多课文档分享上搜索。

1、 GUIDE FOR BUCKLING AND ULTIMATE STRENGTH ASSESSMENT FOR OFFSHORE STRUCTURES APRIL 2004 NOTICE NO. 3 January 2018 The following Changes were approved by the ABS Rules Committee on 30 May 2017 and become EFFECTIVE AS OF 1 JANUARY 2018. (See http:/www.eagle.org for the consolidated version of the Guid

2、e for Buckling and Ultimate Strength Assessment for Offshore Structures 2004, with all Notices and Corrigenda incorporated.) Notes - The date in the parentheses means the date that the Rule becomes effective for new construction based on the contract date for construction. (See 1-1-4/3.3 of the ABS

3、Rules for Conditions of Classification Offshore Units and Structures (Part 1).) SECTION 1 INTRODUCTION (Revise Subsection 1/1, as follows.) 1 General (2018) The criteria in this Guide are primarily based on existing methodologies and their attendant safety factors. These methods and factors are deem

4、ed to provide an equivalent level of safety, reflecting what is considered to be appropriate current practice. It is acknowledged that new methods and criteria for design are constantly evolving. For this reason, ABS does not seek to inhibit the use of an alternative technological approach that is d

5、emonstrated to produce an acceptable level of safety. The criteria in this Guide is presented in the Working Stress Design (WSD) format, also known as the Allowable Stress (or Strength) Design (ASD) format. Alternative structural design criteria in a Load and Resistance Factor Design (LRFD) format a

6、re provided in the ABS Guide for Buckling and Ultimate Strength Assessment of Offshore Structures (LRFD Version). (Revise Subsection 1/7, as follows.) 7 Gross Scantlings (2018) The buckling and ultimate strength formulations provided in this Guide are intended to be used along with the gross scantlings of structural components. ABSGUIDE FOR BUCKLING AND ULTIMATE STRENGTH ASSESSMENT FOR OFFSHORE STRUCTURES .2004 1