ABS 48-2014 GUIDE FOR BUILDING AND CLASSING ACCOMMODATION BARGES (Incorporating Corrigendum 01 01 2015 Notice 1 11 1 2016).pdf

《ABS 48-2014 GUIDE FOR BUILDING AND CLASSING ACCOMMODATION BARGES (Incorporating Corrigendum 01 01 2015 Notice 1 11 1 2016).pdf》由会员分享，可在线阅读，更多相关《ABS 48-2014 GUIDE FOR BUILDING AND CLASSING ACCOMMODATION BARGES (Incorporating Corrigendum 01 01 2015 Notice 1 11 1 2016).pdf（48页珍藏版）》请在麦多课文档分享上搜索。

1、 GUIDE FOR BUILDING AND CLASSING ACCOMMODATION BARGES JANUARY 2014 Guide to Color Coding Used in Online Version of the Guide The following summarizes the colors corresponding to Rule Changes, Corrigenda items and editorial changes in the Guide files which are available for download. Rule Changes: Co

2、rrigenda: CORRIGENDA/EDITORIALS 1 January 2015 Editorials: Editorial Changes Guide for Building and Classing Accommodation Barges GUIDE FOR BUILDING AND CLASSING ACCOMMODATION BARGES JANUARY 2014 (Updated January 2015 see next page) American Bureau of Shipping Incorporated by Act of Legislature of t

3、he State of New York 1862 Copyright 2014 American Bureau of Shipping ABS Plaza 16855 Northchase Drive Houston, TX 77060 USA Updates January 2015 consolidation includes: January 2014 version plus Corrigenda/Editorials ABSGUIDE FOR BUILDING AND CLASSING ACCOMMODATION BARGES .2014 iii Foreword Foreword

4、 As the demand for additional accommodations of offshore personnel grows to support the offshore oil and gas industry, it is envisage that there will be a growth in the use of offshore accommodation barges. Noting the special design and operational characteristics of accommodation barges, ABS has de

5、veloped this Guide to establish the classification requirements for this type of barges. The requirements contained within this Guide include either via direct inclusion or a reference to other ABS Rules or Guides as well as IMO Regulations in existence prior to the issuance of this Guide. The requi

6、rements in this Guide are applicable to accommodation barges of a conventional barge displacement hull. For column stabilized or self-elevating accommodation units please refer to the ABS Guide for Building and Classing Mobile Offshore Units. This Guide references relevant international Regulations

7、and guidelines that are considered to be applicable. While it is the intent of the Guide to be consistent with these Regulations and guidelines, it is the ultimate responsibility of the users of this Guide to refer to the most recent text of those Regulations and guidelines. This Guide is to be used

8、 in conjunction with other Rules published by ABS and IMO Regulations. This Guide is for the use of designers, builders, owners and operators of accommodation barges and specifies the ABS requirements for obtaining the classification notation A1 Accommodation Barge. This Guide supersedes the ABS Pre

9、liminary Rules for Building and Classing Accommodation Barges and Hotel Barges issued in 1989 and becomes effective on the first day of the month of publication. Users are advised to check periodically on the ABS website www.eagle.org to verify that this version of this Guide is the most current. We

10、 welcome your feedback. Comments or suggestions can be sent electronically by email to rsdeagle.org. iv ABSGUIDE FOR BUILDING AND CLASSING ACCOMMODATION BARGES .2014 Table of Contents GUIDE FOR BUILDING AND CLASSING ACCOMMODATION BARGES CONTENTS SECTION 1 Scope and Conditions of Classification . 1 1

11、 Classification . 1 3 Application . 1 5 Classification Symbols and Notations . 1 5.1 Class Notations 1 5.3 Limited Service 2 5.5 Machinery and Systems 2 5.7 Automatic or Remote Control and Monitoring Systems . 2 5.9 Special Purpose. 2 7 Flag State Administration 2 9 Submission of Plans . 2 9.1 Mater

12、ials 2 9.3 Hull Plans 3 9.5 Machinery and Systems Plans 3 9.7 Safety Plans 3 9.9 Stability, Loading and Operating Information . 3 11 Operating Manual . 3 13 Trial . 4 SECTION 2 Definitions . 5 1 General . 5 3 Accommodation Barge 5 5 Accommodation Spaces . 5 7 “A” Class Divisions 5 9 “B” Class Divisi

13、ons 5 11 “C” Class Divisions 5 13 Control Stations 5 15 Crew 6 17 Displacement Hull . 6 19 Flag State Administration 6 21 Industrial Personnel 6 23 Machinery Spaces 6 25 Machinery Spaces of Category A . 6 27 MODU Code 6 ABSGUIDE FOR BUILDING AND CLASSING ACCOMMODATION BARGES .2014 v 29 Noncombustibl

14、e Material 6 31 Non Self-Propelled 6 33 Public Spaces . 7 35 Safe Area 7 37 Safety Center 7 39 Service Spaces . 7 41 Short Field Moves . 7 43 SOLAS 7 SECTION 3 Fire Safety Measures and Features . 8 1 General . 8 1.1 Administration Review . 8 1.3 ABS Review 8 1.5 Materials Containing Asbestos 8 1.7 A

15、lternative Design and Arrangements . 8 1.9 Plans and Specifications . 8 3 Structural Fire Protection 9 3.1 General 9 3.3 Additional Requirements . 9 5 Fire Protection Systems and Equipment 10 5.1 Governmental Authority . 10 5.3 Fixed Fire Fighting Systems 11 5.5 Portable Fire Fighting Systems . 11 5

16、.7 Other Fire Protection Requirements 11 5.9 Arrangement of Fire Water Supply 12 5.11 Fixed Fire Detection and Fire Alarm Systems, and Fixed Automatic Sprinkler, Fire Detection and Fire Alarm Systems 12 5.13 General Alarm . 12 7 Outfitting 12 TABLE 1 Structural Fire Protection 9 TABLE 2 Fire Main Sy

17、stems 11 TABLE 3 Additional Fixed Fire Fighting Systems 11 TABLE 4 Portable Fire Fighting Systems . 11 TABLE 5 Fire Detection and Alarms 11 TABLE 6 Outfitting 12 SECTION 4 Lifesaving Appliances and Equipment . 13 1 General . 13 SECTION 5 Radio Communication Installations . 14 1 General . 14 vi ABSGU

18、IDE FOR BUILDING AND CLASSING ACCOMMODATION BARGES .2014 SECTION 6 Subdivision, Stability, and Freeboard 15 1 General . 15 1.1 Load Line . 15 1.3 Inclining Experiment 15 3 Stability and Watertight/Weathertight Integrity 15 3.1 Intact Stability 16 3.3 Damage Stability 16 3.5 Watertight/Weathertight I

19、ntegrity . 16 3.7 Onboard Computers for Stability Calculations . 17 TABLE 1 Stability 16 TABLE 2 Stability Criteria . 16 TABLE 3 Watertight/Weathertight Integrity 16 SECTION 7 Helicopter Facilities 18 1 General . 18 3 Construction 18 3.1 General 18 3.3 Structure 18 3.5 Size 20 3.7 Drainage 20 3.9 Su

20、rface 20 3.11 Grating Type Construction . 20 3.13 Materials 20 5 Arrangements 22 5.1 Projections . 22 5.3 Tie Downs 22 5.5 Safety Net 22 5.7 Means of Escape and Access . 22 7 Visual Aids 22 7.1 General 22 7.3 Wind Indicator 22 7.5 Markings 22 7.7 Lights . 23 9 Fire-Fighting for Helicopter Facilities

21、 24 9.1 Hoses and Nozzles 24 9.3 Portable Extinguishers . 24 9.5 Back-up System. 25 9.7 Fixed-Foam System . 25 9.9 Fire-fighters Outfits . 25 9.11 Other Equipment 25 11 Helicopter Fuel Oil Storage and Transfer Facilities 26 13 Helicopter Fuel Oil Pumping Arrangements . 27 15 Electrical Systems . 27

22、15.1 Permanent Equipment Grounding Arrangements 27 15.3 Emergency Source of Power . 27 ABSGUIDE FOR BUILDING AND CLASSING ACCOMMODATION BARGES .2014 vii TABLE 1 Allowable Factors of Safety Fsfor Helicopter Decks . 19 FIGURE 1 Example of Helicopter Deck Arrangement 21 FIGURE 2 Example of Helicopter D

23、eck Markings 24 SECTION 8 Mechanical Systems 28 1 General . 28 3 Pumps and Piping Systems 28 3.1 General 28 3.3 Plans and Data to be Submitted 28 5 Fabrication and Tests of Metallic Piping . 29 5.1 Welded Fabrication . 29 5.3 Hydrostatic Tests . 29 7 Plastic Piping 29 9 Vent Pipes . 29 9.1 General 2

24、9 9.3 Protection from Weather and Sea Water Ingress 29 9.5 Size and Height . 29 9.7 Fuel Oil Tanks Vent Outlets . 29 11 Sounding Arrangements . 30 13 Leakage Containment and Drain System . 30 15 Fuel Oil Systems . 30 15.1 General 30 15.3 Pipes in Fuel Oil Tanks 30 15.5 Valves on Fuel Oil Tanks . 30

25、15.7 Independent Tanks 30 17 Lubricating-oil Systems . 31 19 Bilge Systems . 31 19.1 General 31 19.3 Barges 61 Meters (200 Feet) and Over . 31 19.5 Main Line . 31 19.7 Branch Lines . 31 19.9 Size Limits . 31 21 Ballast Systems 32 23 Boilers and Pressure Vessels Including Heat Exchangers . 32 23.1 Ge

26、neral 32 SECTION 9 Electrical Systems . 33 1 General . 33 3 Plans and Data to be Submitted . 33 5 General Considerations 34 5.1 Watertightness 34 5.3 Corrosion Resistance 34 5.5 Grounding 34 5.7 Structure 34 7 Rotating Electrical Machinery . 34 viii ABSGUIDE FOR BUILDING AND CLASSING ACCOMMODATION B

27、ARGES .2014 9 Cables and Wiring . 34 11 Protection and Coordination . 34 13 Power Supply 34 15 Emergency Source of Power 35 15.1 General 35 15.3 Power Supply 35 15.5 Emergency Source of Power . 35 15.7 Transitional Source of Emergency Power 36 15.9 Testing . 36 SECTION 10 Mooring Equipment 37 1 Gene

28、ral . 37 3 Temporary Mooring Equipment 37 5 Position Mooring Equipment . 37 7 Position Mooring System Certification 37 SECTION 11 Surveys . 38 1 Testing, Trials and Surveys During Construction . 38 3 Surveys After Construction . 38 APPENDIX 1 Limited or Restricted Service 39 1 General . 39 3 Harbor

29、Service 39 3.1 Fire Pumps 39 3.3 Lifesaving Appliances and Equipment . 39 3.5 Radio Communication Installations 39 3.7 Electrical Power . 39 ABSGUIDE FOR BUILDING AND CLASSING ACCOMMODATION BARGES .2014 1 Section 1: Scope and Conditions of Classification SECTION 1 Scope and Conditions of Classificat

30、ion (Supplement to the ABS Rules for Conditions of Classification) 1 Classification The requirements for conditions of classification are contained in the separate, generic ABS Rules for Conditions of Classification (Part 1). Additional requirements specific to accommodation barges are contained wit

31、hin this Guide. 3 Application This Guide is applicable to non-self-propelled floating marine structures which operate offshore as accommodation barges as defined in Subsection 2/3. The marine structure referred to herein is a displacement hull. This Guide is intended for offshore accommodation barge

32、s designed and constructed of steels having the properties as specified in ABS Rules for Materials and Welding (Part 2). The use of steels or other materials that have properties different from those specified in Part 2, as well as the corresponding scantlings, are subject to special considerations.

33、 This Guide is intended to cover the requirements specific to accommodation barges. The structural requirements are to comply with the applicable requirements of the ABS Rules for Building and Classing Steel Barges (Barge Rules). Requirements for accommodation units utilizing self-elevating and colu

34、mn-stabilized hulls are addressed separately in the ABS Guide for Building and Classing Mobile Offshore Units (MOU Guide). Gangways to other platforms/installations/vessels, and any other aspect of combined operations are beyond scope of this Guide. 5 Classification Symbols and Notations A listing o

35、f Classification Symbols and Notations available to the Owners of vessels, offshore drilling and production units, and other marine structures and systems, “List of ABS Notations and Symbols”, is available from the ABS website “www.eagle.org”. The following notations are specific to accommodation ba

36、rges. 5.1 Class Notations 5.1.1 Barges Built under ABS Survey Accommodation barges built to the satisfaction of the ABS Surveyors to the full requirements of this Guide, or to its equivalent, where approved by the Committee for service may be classed and distinguished in the Record by the symbols A1

37、 Accommodation Barge, indicating compliance with the requirements of the Guide and including compliance with the machinery requirements. 5.1.2 Barges Not Built under ABS Survey Accommodation barges not built under ABS survey, but submitted for ABS classification, are subjected to special classificat

38、ion surveys. Where found satisfactory and thereafter approved by ABS, they may be classed and distinguished in the Record by A1 Accommodation Barge, as the case may be, but the symbol signifying survey during construction will be omitted. Section 1 Scope and Conditions of Classification 2 ABSGUIDE F

39、OR BUILDING AND CLASSING ACCOMMODATION BARGES .2014 5.3 Limited Service Accommodation barges built to the satisfaction of the ABS Surveyors to special modified requirements for limited or restricted services and approved by ABS for that particular service, are to be classed and distinguished in the

40、Record by the symbols and notations as described in 1/5.1 above, followed by or including the appropriate service limitation. Also see Appendix 1. 5.5 Machinery and Systems Machinery and systems for accommodation barges are to comply with the requirements specified in Section 8 of this Guide. Thrust

41、er machinery and systems used for short field moves (consisting of moving the barge from one work location to another location within the same area of operation, that is conducted in daylight up to 20 miles in distance or 8 hours in duration) of non-propelled units and complying with the requirement

42、s of the ABS Rules for Building and Classing Steel Vessels (Steel Vessel Rules) as applied to self-propelled barges, manufactured and installed under ABS survey and found satisfactory after trials, will be distinguished in the Record by the notation AMS-NP, as appropriate. 5.7 Automatic or Remote Co

43、ntrol and Monitoring Systems For automatic or remote control and monitoring systems of the machinery other than the propulsion machinery as referenced in Subsection 1/1 of the ABS Guide for Automatic or Remote Control and Monitoring for Machinery and Systems (other than Propulsion) on Offshore Insta

44、llations, ABS will consider additional classifications with symbols AMCC or AMCCU, as appropriate, provided that the applicable requirements of the ABS Guide for Automatic or Remote Control and Monitoring for Machinery and Systems (other than Propulsion) on Offshore Installations are satisfied. 5.9

45、Special Purpose At the request of the Owner, accommodation barges that comply with the requirements in Section 5-1-2 of the ABS Rules for Building and Classing Offshore Support Vessels (OSV Rules) and the Code of Safety for Special Purpose Ships (SPS Code) adopted by the IMO Maritime Safety Committe

46、e as Resolution MSC 266(84) (SPS Code) will be assigned the class notation SPS. 7 Flag State Administration Requirements additional to those given in Section 3 through 11 of the Guide may be imposed by the flag Administration with whom the accommodation barge is registered or by the Administration w

47、ithin whose territorial jurisdiction the accommodation barge is intended to operate. Approval of safety plans of the accommodation barge (such as fire safety measures and features, lifesaving appliances and equipment, radio communication installations, and subdivisions and stability etc.) by a flag

48、Administration, in accordance with requirements equivalent to those by class, may be considered as complying with the class requirements provided such approval can be satisfactorily documented. 9 Submission of Plans Plans and specifications specified in the following sections, together with supporti

49、ng calculations as appropriate, are to be submitted before proceeding with the work. Detailed listing of plans can be found in Sections 3 through 11. Plans should generally be submitted electronically to ABS. However, hard copies will also be accepted. 9.1 Materials This Guide is intended for accommodation barges designed and constructed of steels having the properties as specified in the ABS Rules for Materials and Welding (Part 2). The use of steels or other materials that have properties different from those specified in ABS Rules for Materials and Welding (Part 2),