API RP 13L-2003 Recommended Practice for Training and Qualification of Drilling Fluid Technologists (FIRST EDITION)《钻井液技师的培训和资格认定推荐作法.第1版》.pdf

《API RP 13L-2003 Recommended Practice for Training and Qualification of Drilling Fluid Technologists (FIRST EDITION)《钻井液技师的培训和资格认定推荐作法.第1版》.pdf》由会员分享，可在线阅读，更多相关《API RP 13L-2003 Recommended Practice for Training and Qualification of Drilling Fluid Technologists (FIRST EDITION)《钻井液技师的培训和资格认定推荐作法.第1版》.pdf（19页珍藏版）》请在麦多课文档分享上搜索。

1、Recommended Practice for Training and Qualification of Drilling Fluid Technologists API RECOMMENDED PRACTICE 13L FIRST EDITION, FEBRUARY 2003 REAFFIRMED, OCTOBER 2010Recommended Practice for Training and Qualification of Drilling Fluid Technologists Upstream Segment API RECOMMENDED PRACTICE 13L FIRS

2、T EDITION, FEBRUARY 2003 REAFFIRMED, OCTOBER 2010 SPECIAL NOTESAPI publications necessarily address problems of a general nature. With respect to partic- ular circumstances, local, state, and federal laws and regulations should be reviewed. API is not undertaking to meet the duties of employers, man

3、ufacturers, or suppliers to warn and properly train and equip their employees, and others exposed, concerning health and safety risks and precautions, nor undertaking their obligations under local, state, or fed- eral laws. Information concerning safety and health risks and proper precautions with r

4、espect to par- ticular materials and conditions should be obtained from the employer, the manufacturer or supplier of that material, or the material safety data sheet. Nothing contained in any API publication is to be construed as granting any right, by implication or otherwise, for the manufacture,

5、 sale, or use of any method, apparatus, or prod- uct covered by letters patent. Neither should anything contained in the publication be con- strued as insuring anyone against liability for infringement of letters patent. Generally, API standards are reviewed and revised, reafrmed, or withdrawn at le

6、ast every ve years. Sometimes a one-time extension of up to two years will be added to this review cycle. This publication will no longer be in effect ve years after its publication date as an operative API standard or, where an extension has been granted, upon republication. Status of the publicati

7、on can be ascertained from the API Upstream Segment telephone (202) 682- 8000. A catalog of API publications and materials is published annually and updated quar- terly by API, 1220 L Street, N.W., Washington, D.C. 20005. This document was produced under API standardization procedures that ensure ap

8、propri- ate notication and participation in the developmental process and is designated as an API standard. Questions concerning the interpretation of the content of this standard or com- ments and questions concerning the procedures under which this standard was developed should be directed in writ

9、ing to the standardization manager, American Petroleum Institute, 1220 L Street, N.W., Washington, D.C. 20005. Requests for permission to reproduce or translate all or any part of the material published herein should also be addressed to the gen- eral manager. API standards are published to facilita

10、te the broad availability of proven, sound engineer- ing and operating practices. These standards are not intended to obviate the need for apply- ing sound engineering judgment regarding when and where these standards should be utilized. The formulation and publication of API standards is not intend

11、ed in any way to inhibit anyone from using any other practices. Any manufacturer marking equipment or materials in conformance with the marking requirements of an API standard is solely responsible for complying with all the applicable requirements of that standard. API does not represent, warrant,

12、or guarantee that such prod- ucts do in fact conform to the applicable API standard.All rights reserved. No part of this work may be reproduced, stored in a retrieval system, or transmitted by any means, electronic, mechanical, photocopying, recording, or otherwise, without prior written permission

13、from the publisher. Contact the Publisher, API Publishing Services, 1220 L Street, N.W., Washington, D.C. 20005.Copyright 2003 American Petroleum Institute FOREWORDA professional discipline of Petroleum Engineer is divided into sub-disciplines in which technical expertise is required. One of the sub

14、-disciplines deals with uids that are essential to the operation of many exploration and production petroleum and natural gas operations and include: Drilling uids; Completion uids; Solids control; Cementing; Stimulation. These technologies are similar in that they combine the need for both engineer

15、ing and chemistry knowledge and skills. These specialized operations may not be covered in depth by colleges and universities that have petroleum engineering curricula. The knowledge is gained by on-the-job training. In addition, these operations do not necessarily require an engineering or scientic

16、 degree, or even an academic degree at all. By a combination of for- mal training and practical experience, and in some cases the use of intuitive and common sense skills, individuals have become recognized experts in developing and applying these technologies in eld applications. As there is not a

17、clear denition of minimum competency for the drilling uids technolo- gist professions, API Committee 3, Subcommittee 13, Drilling and Completions Fluid, for- mulated an objective to establish criteria for minimum competency for eld drilling uids technologists. This was done by developing a two dimen

18、sional matrix of breadth and depth statements to be met by a technologist immediately after successfully completing a basic drilling uids training course. The breadth-depth format is similar to current efforts by the National Council of Examiners for Engineering and Surveyors (NCEES) to improve the

19、sta- tistical validity of its certication exams. This standard is not intended to establish certica- tion procedures for drilling uids personnel, but is to be used for general guidance in evaluating training processes and evaluating the professional acceptability of drilling uid technologists. API p

20、ublications may be used by anyone desiring to do so. Every effort has been made by the Institute to assure the accuracy and reliability of the data contained in them; however, the Institute makes no representation, warranty, or guarantee in connection with this publication and hereby expressly discl

21、aims any liability or responsibility for loss or damage resulting from its use or for the violation of any federal, state, or municipal regulation with which this publication may conict. Suggested revisions are invited and should be submitted to the standardization manager, American Petroleum Instit

22、ute, 1220 L Street, N.W., Washington, D.C. 20005.iii CONTENTSPage1 SCOPE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 2 REFERENCES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

23、. . . . . . . . . . . . . 1 3 TERMS, DEFINITIONS AND ABBREVIATIONS. . . . . . . . . . . . . . . . . . . . . . . . . . . 1 3.1 Terms and Denitions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 3.2 Abbreviation . . . . . . . . . . . . . . . . . . . . .

24、. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 4 PRINCIPLE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 5 PROCEDURE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

25、. . . . . . . . . . . . . 1 5.1 Origins of Disciplines and Sub-disciplines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 5.2 Basic Industry Standards Used for Generic Information. . . . . . . . . . . . . . . . . . . . 1 5.3 Sub-disciplineGeneral Information . . . . . . . . . . . . .

26、. . . . . . . . . . . . . . . . . . . . . 2 5.4 Sub-disciplineDrilling Fluid Chemistry. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 5.5 Sub-disciplineDrilling Fluid Engineering . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 5.6 Sub-disciplineNon-aqueous Drilling Fluids

27、 . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 5.7 Sub-disciplineFluid Formulations and Additives. . . . . . . . . . . . . . . . . . . . . . . . 5 5.8 Sub-disciplineLogistics and Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Appendices Appendix A . . . . . . . . .

28、 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Tables 1 General Information of Tasks and Skills . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 2 Drilling Fluid Chemistry Tasks and Skills . . . . . . . . . . . . . . . . . . . . .

29、. . . . . . . . . . . 2 3 Drilling Fluid Engineering Tasks and Skills . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 4 Non-aqueous Drilling Fluids Tasks and Skills . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 5 Fluid Formulations and Additives Tasks and Skills . . . . . .

30、 . . . . . . . . . . . . . . . . . . . 5 6 Logistics and Maintenance Tasks and Skills . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5v 1Recommended Practice for Training and Qualication of Drilling Fluid Technologists1 ScopeThis standard is a written summary of basic training and knowl

31、edge that an employee or contractor shall possess to be identied as a drilling uids technologist. Levels of under- standing have been generally outlined, but not totally dened.2 ReferencesAPI Spec 13ADrilling Fluid MaterialsRP 13B-1Standard Procedure for Field Testing Water-Based Drilling FluidsRP 1

32、3B-2Standard Procedure for Field Testing Oil- Based Drilling FluidsISO 13500 Petroleum and natural gas industries Drilling fluid materialsSpecifications and tests10414-1 Petroleum and natural gas industries Field Testing of Drilling FluidsPart 1: Water-based fluids10414-2 Petroleum and natural gas i

33、ndustries Field Testing of Drilling FluidsPart 2: Oil-based fluids3 Terms, Denitions and Abbreviations3.1 TERMS AND DEFINITIONS 3.1.1 breadth:The basic knowledge common to all areas of drilling uids technology needed by all drilling uids tech- nologists to demonstrate minimum competency.3.1.2 depth:

34、 The knowledge acquired by all drilling uids technologists following 4 6 years of practical experience.3.1.3 drilling uids engineer:A drilling uids technol- ogist with an engineering degree from an accredited university.3.1.4 drilling uids technician:An individual skilled in the art of testing drill

35、ing uids in the eld or the laboratory.3.1.5 drilling uids technologist: Individual with spe- cialized knowledge of the application of drilling uids during the drilling operation.3.1.6 senior drilling uids technologist/engineer:A drilling uid technologist or engineer who by training and experience ha

36、s advanced knowledge of drilling uids, drilling uid chemistry, and their varied applications.3.2 ABBREVIATIONAPI American Petroleum Institute HTHP High temperature, high pressure MBT Methylene blue test PV Plastic viscosity in cP (1 cP = 1 mPa*s) YP Yield point in Pa4 PrincipleThis document is a rec

37、ommended practice (RP) and seeks to formalize the specic knowledge base, professional skills, and application skills needed to ensure the competency and professionalism of individuals working in the drilling uids industry. Drilling uids technologists should use this RP as an outline to self-determin

38、e any gaps in learning and seek to improve their skills. A company contracting the service of a drilling uids technologist should use this recommended practice as a checklist of knowledge that a technologist should be able to demonstrate prociency in applying.5 Procedure5.1 ORIGINS OF DISCIPLINES AN

39、D SUB- DISCIPLINESThe drilling uids disciplines and sub-disciplines were developed from a review of the typical curricula followed by drilling uids service companies in their basic mud school. The topics as listed in Appendix A were used as a framework for developing the guidelines that form the nor

40、mative portion of this standard. Each sub-discipline was divided into appro- priate tasks and those tasks were assigned breath of knowl- edge statements needed to obtain minimum competency. The drilling uid technologist discipline is broken into six sub- disciplines and each sub-discipline is descri

41、bed by tasks and specic skills to demonstrate prociency and knowledge in that task. For ease of reading, the tasks and skill set are placed in a table format.5.2 BASIC INDUSTRY STANDARDS USED FOR GENERIC INFORMATIONAPI Spec 13A and ISO 13500, Specifications for Drilling Fluid Materials,provide speci

42、cations for drilling uid mate- rial. Two documents cover the eld testing procedures for tests included on the drilling mud report form. These are API RP 13B-1 or ISO 10414-1, Standard Procedure for Field Testing of Water-based Drilling Fluids, and API RP 13B-2 or ISO 10414, Standard Procedure for Fi

43、eld Testing of Oil- based Drilling Fluids. 2 API RECOMMENDEDPRACTICE13L5.3 SUB-DISCIPLINEGENERAL INFORMATION 5.4 SUB-DISCIPLINEDRILLING FLUID CHEMISTRYTable 1General Information of Tasks and SkillsTASK SKILLS Rotary drilling operations Name the parts of a rotary drilling rig. Describe the components

44、 of a rotary drilling circulating system. Describe the rotary drilling process. Describe the functions of rig crew and supervisory personnel. Drilling uid functions List the functions of drilling uids. Drilling uids properties List the commonly used drilling uid properties. Match each mud property t

45、o related function. Drilling uids testing List each commonly used drilling uid test and its units. Relate each drilling uid test to the appropriate property or function. Perform the recommended API drilling uids tests according to the appropriate API RP satisfacto- rily. Completely ll out the API Mu

46、d Report Form for water- and oil-based muds. Drilling uids composition List the types of drilling uids by base uids. List the components of typical drilling uid systems. Identify the function of each component in a drilling uid system. Match drilling uid systems to specic applications.Table 2Drillin

47、g Fluid Chemistry Tasks and SkillsTASK SKILLS Water and base uid chemistry Identify chemical properties and relate them to a drilling uids performance. Describe the API tests for chemical properties. List the basic physical properties of common base uids specied for drilling uid use. Weight material

48、 List commonly used weight materials. Give chemical and physical behavior of each weight material. List API specications for weight materials. Clay chemistry List types of clays used in drilling uids. Describe chemical and physical behavior of each clay. Identify the commonly occurring clay associat

49、ion states found in drilling uids. Filtrate chemistry Dene alkalinity, salinity and hardness. List the typical ions associated with each of these types of ltrate components. Relate each ltrate component to its possible effects on drilling uid performance. Calculate the quantitative amounts of each component from ltrate titration numbers. Contamination List the common drilling uid contaminants. Identify the effects on vario