BS PD CLC TR 62453-515-2009 0000 Field device tool (FDT) interface nspecification — nPart 515 Communication implementation for ncommon object model - IEC 61784 CPF 15《菲尔德设计工具(FDT.pdf

《BS PD CLC TR 62453-515-2009 0000 Field device tool (FDT) interface nspecification — nPart 515 Communication implementation for ncommon object model - IEC 61784 CPF 15《菲尔德设计工具(FDT.pdf》由会员分享，可在线阅读，更多相关《BS PD CLC TR 62453-515-2009 0000 Field device tool (FDT) interface nspecification — nPart 515 Communication implementation for ncommon object model - IEC 61784 CPF 15《菲尔德设计工具(FDT.pdf（34页珍藏版）》请在麦多课文档分享上搜索。

1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationField device tool (FDT) interfacespecification Part 515: Communication implementation for common object model - IEC 61784 CPF 15PD CLC/TR 62453-515:2009Licensed Copy: Wang Bin, I

2、SO/EXCHANGE CHINA STANDARDS, 19/04/2010 04:18, Uncontrolled Copy, (c) BSINational forewordThis Published Document is the UK implementation of CLC/TR 62453-515:2009.The UK participation in its preparation was entrusted to Technical CommitteeAMT/7, Industrial communications: process measurement and co

3、ntrol, including fieldbus.A list of organizations represented on this committee can be obtained onrequest to its secretary.This publication does not purport to include all the necessary provisions of acontract. Users are responsible for its correct application. BSI 2010ISBN 978 0 580 62574 9ICS 25.0

4、40.40; 35.100.05; 35.110Compliance with a British Standard cannot confer immunity fromlegal obligations.This Published Document was published under the authority of theStandards Policy and Strategy Committee on 31 January 2010Amendments issued since publicationAmd. No. Date Text affectedBRITISH STAN

5、DARDPD CLC/TR 62453-515:2009Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 19/04/2010 04:18, Uncontrolled Copy, (c) BSITECHNICAL REPORT CLC/TR 62453-515 RAPPORT TECHNIQUE TECHNISCHER BERICHT November 2009 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normal

6、isation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Central Secretariat: Avenue Marnix 17, B - 1000 Brussels 2009 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. CLC/TR 62453-515:2009 E ICS 25.040.40; 35.100.05;

7、 35.110 English version Field device tool (FDT) interface specification - Part 515: Communication implementation for common object model - IEC 61784 CPF 15 (IEC/TR 62453-515:2009) Spcification des interfaces des outils des dispositifs de terrain (FDT) - Partie 515: Implmentation des communications p

8、our le modle objet commun - CEI 61784 CPF 15 (CEI/TR 62453-515:2009) Field Device Tool (FDT) -Schnittstellenspezifikation - Teil 515: Kommunikationsimplementierung mit dem allgemeinen Objektmodell (COM) -Kommunikationsprofilfamilie (CPF) 15 nach IEC 61784 (IEC/TR 62453-515:2009) This Technical Repor

9、t was approved by CENELEC on 2009-10-01. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands

10、, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. PD CLC/TR 62453-515:2009Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 19/04/2010 04:18, Uncontrolled Copy, (c) BSICLC/TR 62453-515:2009 - 2 - Foreword The text of document 65E/71/CDV,

11、 future edition 1 of IEC/TR 62453-515, prepared by SC 65E, Devices and integration in enterprise systems, of IEC TC 65, Industrial-process measurement, control and automation, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as CLC/TR 62453-515 on 2009-10-01. This standard

12、is to be used in conjunction with EN 62453-3xy series. Annex ZA has been added by CENELEC. _ Endorsement notice The text of the Technical Report IEC/TR 62453-515:2009 was approved by CENELEC as a Technical Report without any modification. In the official version, for Bibliography, the following note

13、 has to be added for the standard indicated: IEC 61158-5-15 NOTE Harmonized as EN 61158-5-15:2008 (not modified). _ PD CLC/TR 62453-515:2009Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 19/04/2010 04:18, Uncontrolled Copy, (c) BSI- 3 - CLC/TR 62453-515:2009 Annex ZA (normative) Normative re

14、ferences to international publications with their corresponding European publications The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document

15、 (including any amendments) applies. NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. Publication Year Title EN/HD Year IEC 61131-3 -1)Programmable controllers - Part 3: Programming languages EN 61131-3 20032)IEC 61784-

16、2 -1) Industrial communication networks - Profiles - Part 2: Additional fieldbus profiles for real-time networks based on ISO/IEC 8802-3 EN 61784-2 20082)IEC 62453-1 2009 Field device tool (FDT) interface specification - Part 1: Overview and guidance EN 62453-1 2009 IEC 62453-2 2009 Field device too

17、l (FDT) interface specification - Part 2: Concepts and detailed description EN 62453-2 2009 IEC/TR 62453-41 2009 Field device tool (FDT) interface specification - Part 41: Object model integration profile - Common object model CLC/TR 62453-41 2009 IEC 62453-315 2009 Field device tool (FDT) interface

18、 specification - Part 315: Communication profile integration - IEC 61784 CPF 15 EN 62453-315 2009 _ 1)Undated reference. 2)Valid edition at date of issue. PD CLC/TR 62453-515:2009Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 19/04/2010 04:18, Uncontrolled Copy, (c) BSI 2 TR 62453-515 IEC:20

19、09(E) CONTENTS INTRODUCTION.5 1 Scope.6 2 Normative references .6 3 Terms, definitions, symbols, abbreviated terms and conventions 7 3.1 Terms and definitions 7 3.2 Symbols and abbreviated terms.7 3.3 Conventions 7 3.3.1 Data type names and references to data types 7 3.3.2 Vocabulary for requirement

20、s7 4 Bus category 7 5 Access to instance and device data7 6 Protocol specific usage of general data types.7 7 Protocol specific common data types8 8 Network management data types8 8.1 General .8 8.2 Modbus device address - FDTModbusAddressSchema8 9 Communication data types - FDTModbusCommunicationSc

21、hema.9 10 Channel parameter data types - FDTModbusChannelParameterSchema 17 11 Device identification .19 11.1 Device type identification data types - FDTModbusIdentSchema .19 11.2 Topology scan data types - DTMModbusDeviceSchema20 11.3 Scan identification data types - FDTModbusScanIdentSchema21 11.4

22、 Device type identification data types - FDTModbusDeviceTypeIdentSchema.23 11.5 XSLT Transformation 24 Bibliography30 Figure 1 Part 515 of the IEC 62453 series .5 Table 1 Protocol specific usage of general data types8 PD CLC/TR 62453-515:2009Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 19/

23、04/2010 04:18, Uncontrolled Copy, (c) BSITR 62453-515 IEC:2009(E) 5 INTRODUCTION This part of IEC 62453 is an interface specification for developers of FDT (Field Device Tool) components for function control and data access within a client/server architecture. The specification is a result of an ana

24、lysis and design process to develop standard interfaces to facilitate the development of servers and clients by multiple vendors that need to interoperate seamlessly. With the integration of fieldbusses into control systems, there are a few other tasks which need to be performed. In addition to fiel

25、dbus- and device-specific tools, there is a need to integrate these tools into higher-level system-wide planning- or engineering tools. In particular, for use in extensive and heterogeneous control systems, typically in the area of the process industry, the unambiguous definition of engineering inte

26、rfaces that are easy to use for all those involved is of great importance. A device-specific software component, called DTM (Device Type Manager), is supplied by the field device manufacturer with its device. The DTM is integrated into engineering tools via the FDT interfaces defined in this specifi

27、cation. The approach to integration is in general open for all kind of fieldbusses and thus meets the requirements for integrating different kinds of devices into heterogeneous control systems. Figure 1 shows how IEC/TR 62453-515 is aligned in the structure of IEC 62453 series. Part 515Communication

28、implementationfor common object model IEC 61784 CPF 15Figure 1 Part 515 of the IEC 62453 series PD CLC/TR 62453-515:2009Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 19/04/2010 04:18, Uncontrolled Copy, (c) BSI 6 TR 62453-515 IEC:2009(E) FIELD DEVICE TOOL (FDT) INTERFACE SPECIFICATION Part

29、515: Communication implementation for common object model IEC 61784 CPF 15 1 Scope IEC/TR 62453-515, which is a technical report, provides information for integrating IEC 61784-2 CPF 15 (Modbus TCP) and Modbus Serial Line1)protocol support into FDT systems based on COM implementation. This part is t

30、o be used in conjunction with IEC/TR 62453-41. NOTE This part of IEC 62453 only specifies the mapping of Modbus parameters to FDT data types. For restrictions of protocol specific parameters concerning allowed values and concerning limitations of arrays used in the definition of FDT data types, refe

31、r to IEC 61158-5-15 and the MODBUS Application Protocol Specification. This part of IEC 62453 specifies communication and other services. This specification neither contains the FDT specification nor modifies it. 2 Normative references The following referenced documents are indispensable for the app

32、lication of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. IEC 61131-3, Programmable controllers Part 3: Programming languages IEC 61784-2, Industrial communication network

33、s Profiles Part 2: Additional fieldbus profiles for real-time networks based on ISO/IEC 8802-3 IEC 62453-1:2009,Field Device Tool (FDT) interface specification Part 1: Overview and guidance IEC 62453-2:2009,Field Device Tool (FDT) interface specification Part 2: Concepts and detailed description IEC

34、/TR 62453-41:2009, Field Device Tool (FDT) interface specification Part 41: Object model integration profile Common object model IEC 62453-315:2009, Field Device Tool (FDT) interface specification Part 315: Communication profile integration IEC 61784 CPF 15 1)Modbus is the trademark of Schneider Aut

35、omation Inc. It is registered in the United States of America. This information is given for the convenience of users of this International Standard and does not constitute an endorsement by IEC of the trademark holder or any of its products. Compliance to this profile does not require use of the tr

36、ademark Modbus. Use of the trademark Modbus requires permission from Schneider Automation Inc.PD CLC/TR 62453-515:2009Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 19/04/2010 04:18, Uncontrolled Copy, (c) BSITR 62453-515 IEC:2009(E) 7 3 Terms, definitions, symbols, abbreviated terms and con

37、ventions 3.1 Terms and definitions For the purpose of this document, the terms and definitions given in IEC 62453-1, IEC 62453-2 and the following apply. 3.2 Symbols and abbreviated terms For the purpose of this document, the symbols and abbreviations given in IEC 62453-1, IEC 62453-2 and the follow

38、ing apply. CP Communication Profile IEC 61784-1 CPF Communication Profile Family IEC 61784-1 3.3 Conventions 3.3.1 Data type names and references to data types The conventions for naming and referencing of data types are explained in IEC 62453-2 Clause A.1 3.3.2 Vocabulary for requirements The follo

39、wing expressions are used when specifying requirements. Usage of “shall” or “Mandatory” No exceptions allowed. Usage of “should” or “Recommended” Strong recommendation. It may make sense in special exceptional cases to differ from the described behavior. Usage of “can or “Optional Function or behavi

40、or may be provided, depending on defined conditions. 4 Bus category IEC 61784 CPF 15 protocol is identified by the attribute definition busCategory as specified in IEC 62453-315 (protocol identifiers). 5 Access to instance and device data Used at methods: IDtmParameter:GetParameters() IDtmParameter:

41、SetParameters() These methods shall provide access to at least to all parameters defined in the IEC 62453-315. 6 Protocol specific usage of general data types Table 1 shows how general data types are used with IEC 61784 CPF 15 devices. PD CLC/TR 62453-515:2009Licensed Copy: Wang Bin, ISO/EXCHANGE CH

42、INA STANDARDS, 19/04/2010 04:18, Uncontrolled Copy, (c) BSI 8 TR 62453-515 IEC:2009(E) Table 1 Protocol specific usage of general data types Attribute Description for use fdt:address fdt:protocolId fdt:deviceTypeId fdt:deviceTypeInformation fdt:deviceTypeInformationPath fdt:manufacturerId fdt:semant

43、icId fdt:applicationDomain fdt:tag All these attributes of the FDTDatatype schema are used as defined in IEC 62453-315. 7 Protocol specific common data types This clause specifies the protocol specific common data types, which are used in the definition of other data types. 8 Network management data

44、 types 8.1 General The data types specified in this clause are used at following methods: IDtmParameter:GetParameters IDtmParameter:SetParameters 8.2 Modbus device address - FDTModbusAddressSchema The address of a Modbus device is available at the element . PD CLC/TR 62453-515:2009Licensed Copy: Wan

45、g Bin, ISO/EXCHANGE CHINA STANDARDS, 19/04/2010 04:18, Uncontrolled Copy, (c) BSITR 62453-515 IEC:2009(E) 9 9 Communication data types - FDTModbusCommunicationSchema The data types specified in this clause are used with the methods of IFdtCommunication. PD CLC/TR 62453-515:2009Licensed Copy: Wang Bi

46、n, ISO/EXCHANGE CHINA STANDARDS, 19/04/2010 04:18, Uncontrolled Copy, (c) BSI 10 TR 62453-515 IEC:2009(E) PD CLC/TR 62453-515:2009Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 19/04/2010 04:18, Uncontrolled Copy, (c) BSITR 62453-515 IEC:2009(E) 11 PD CLC/TR 62453-515:2009Licensed Copy: Wang

47、 Bin, ISO/EXCHANGE CHINA STANDARDS, 19/04/2010 04:18, Uncontrolled Copy, (c) BSI 12 TR 62453-515 IEC:2009(E) PD CLC/TR 62453-515:2009Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 19/04/2010 04:18, Uncontrolled Copy, (c) BSITR 62453-515 IEC:2009(E) 13 PD CLC/TR 62453-515:2009Licensed Copy: W

48、ang Bin, ISO/EXCHANGE CHINA STANDARDS, 19/04/2010 04:18, Uncontrolled Copy, (c) BSI 14 TR 62453-515 IEC:2009(E) PD CLC/TR 62453-515:2009Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 19/04/2010 04:18, Uncontrolled Copy, (c) BSITR 62453-515 IEC:2009(E) 15 PD CLC/TR 62453-515:2009Licensed Copy

49、: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 19/04/2010 04:18, Uncontrolled Copy, (c) BSI 16 TR 62453-515 IEC:2009(E) PD CLC/TR 62453-515:2009Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 19/04/2010 04:18, Uncontrolled Copy, (c) BSITR 62453-515 IEC:2009(E) 17 10 Channel parameter data types - FDTModbusChannelParameterSchema The data types specified in this clause are used with the following methods