BS PD CLC TR 62453-502-2009 2500 Field device tool (FDT) interface nspecification — nPart 502 Communication implementation for ncommon object model — IEC 61784 CPF 2《现场设备工具(FDT)接.pdf

《BS PD CLC TR 62453-502-2009 2500 Field device tool (FDT) interface nspecification — nPart 502 Communication implementation for ncommon object model — IEC 61784 CPF 2《现场设备工具(FDT)接.pdf》由会员分享，可在线阅读，更多相关《BS PD CLC TR 62453-502-2009 2500 Field device tool (FDT) interface nspecification — nPart 502 Communication implementation for ncommon object model — IEC 61784 CPF 2《现场设备工具(FDT)接.pdf（28页珍藏版）》请在麦多课文档分享上搜索。

1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationField device tool (FDT) interfacespecification Part 502: Communication implementation for common object model IEC 61784 CPF 2PD CLC/TR 62453-502:2009Licensed Copy: Wang Bin, ISO/

2、EXCHANGE CHINA STANDARDS, 19/04/2010 02:24, Uncontrolled Copy, (c) BSINational forewordThis Published Document is the UK implementation of CLC/TR 62453-502:2009.The UK participation in its preparation was entrusted to Technical CommitteeAMT/7, Industrial communications: process measurement and contr

3、ol, including fieldbus.A list of organizations represented on this committee can be obtained onrequest to its secretary.This publication does not purport to include all the necessary provisions of acontract. Users are responsible for its correct application. BSI 2010ISBN 978 0 580 62569 5ICS 25.040.

4、40; 35.100.05; 35.110Compliance with a British Standard cannot confer immunity fromlegal obligations.This Published Document was published under the authority of theStandards Policy and Strategy Committee on 31 January 2010Amendments issued since publicationAmd. No. Date Text affectedBRITISH STANDAR

5、DPD CLC/TR 62453-502:2009Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 19/04/2010 02:24, Uncontrolled Copy, (c) BSITECHNICAL REPORT CLC/TR 62453-502 RAPPORT TECHNIQUE TECHNISCHER BERICHT November 2009 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisa

6、tion Electrotechnique Europisches Komitee fr Elektrotechnische Normung Central Secretariat: Avenue Marnix 17, B - 1000 Brussels 2009 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. CLC/TR 62453-502:2009 E ICS 25.040.40; 35.100.05; 35

7、.110 English version Field device tool (FDT) interface specification - Part 502: Communication implementation for common object model - IEC 61784 CPF 2 (IEC/TR 62453-502:2009) Spcification des interfaces des outils des dispositifs de terrain (FDT) - Partie 502: Implmentation des communications pour

8、le modle objet commun - CEI 61784 CPF 2 (CEI/TR 62453-502:2009) Field Device Tool (FDT)-Schnittstellenspezifikation - Teil 502: Kommunikationsimplementierung mit dem allgemeinen Objektmodell (COM) -Kommunikationsprofilfamilie (CPF) 2 nach IEC 61784 (IEC/TR 62453-502:2009) This Technical Report was a

9、pproved by CENELEC on 2009-10-01. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norwa

10、y, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. PD CLC/TR 62453-502:2009Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 19/04/2010 02:24, Uncontrolled Copy, (c) BSICLC/TR 62453-502:2009 - 2 - Foreword The text of document 65E/66/CDV, future

11、 edition 1 of IEC/TR 62453-502, prepared by SC 65E, Devices and integration in enterprise systems, of IEC TC 65, Industrial-process measurement, control and automation, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as CLC/TR 62453-502 on 2009-10-01. This standard is to b

12、e used in conjunction with EN 62453-3xy series. Annex ZA has been added by CENELEC. _ Endorsement notice The text of the Technical Report IEC/TR 62453-502:2009 was approved by CENELEC as a Technical Report without any modification. In the official version, for Bibliography, the following notes have

13、to be added for the standards indicated: IEC 61131-3 NOTE Harmonized as EN 61131-3:2003 (not modified). IEC 61784-3-2 NOTE Harmonized as EN 61784-3-2:2008 (not modified). _ PD CLC/TR 62453-502:2009Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 19/04/2010 02:24, Uncontrolled Copy, (c) BSI- 3

14、- CLC/TR 62453-502:2009 Annex ZA (normative) Normative references to international publications with their corresponding European publications The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated

15、references, the latest edition of the referenced document (including any amendments) applies. NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. Publication Year Title EN/HD Year IEC 61158-2 -1)Industrial communication ne

16、tworks - Fieldbus specifications - Part 2: Physical layer specification and service definition EN 61158-2 20082)IEC 61158-3-2 -1) Industrial communication networks - Fieldbus specifications - Part 3-2: Data-link layer service definition - Type 2 elements EN 61158-3-2 20082)IEC 61158-4-2 -1)Industria

17、l communication networks - Fieldbus specifications - Part 4-2: Data-link layer protocol specification - Type 2 elements EN 61158-4-2 20082)IEC 61158-5-2 -1)Industrial communication networks - Fieldbus specifications - Part 5-2: Application layer service definition - Type 2 elements EN 61158-5-2 2008

18、2)IEC 61158-6-2 -1)Industrial communication networks - Fieldbus specifications - Part 6-2: Application layer protocol specification - Type 2 elements EN 61158-6-2 20082)IEC 61784-1 -1)Industrial communication networks - Profiles -Part 1: Fieldbus profiles EN 61784-1 20082)IEC 61784-2 -1)Industrial c

19、ommunication networks - Profiles - Part 2: Additional fieldbus profiles for real-time networks based on ISO/IEC 8802-3 EN 61784-2 20082)IEC 62026-3 -1)Low-voltage switchgear and controlgear - Controller-device interfaces (CDIs) - Part 3: DeviceNet EN 62026-3 20092)IEC 62453-1 2009 Field device tool

20、(FDT) interface specification - Part 1: Overview and guidance EN 62453-1 2009 IEC 62453-2 2009 Field device tool (FDT) interface specification - Part 2: Concepts and detailed description EN 62453-2 2009 IEC/TR 62453-41 2009 Field device tool (FDT) interface specification - Part 41: Object model inte

21、gration profile - Common object model CLC/TR 62453-41 2009 1)Undated reference. 2)Valid edition at date of issue. PD CLC/TR 62453-502:2009Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 19/04/2010 02:24, Uncontrolled Copy, (c) BSICLC/TR 62453-502:2009 - 4 - Publication Year Title EN/HD Year I

22、EC 62453-302 2009 Field device tool (FDT) interface specification - Part 302: Communication profile integration - IEC 61784 CPF 2 EN 62453-302 2009 _ PD CLC/TR 62453-502:2009Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 19/04/2010 02:24, Uncontrolled Copy, (c) BSI 2 TR 62453-502 IEC:2009(E)

23、 CONTENTS INTRODUCTION.5 1 Scope.6 2 Normative references .6 3 Terms, definitions, symbols, abbreviated terms and conventions 7 3.1 Terms and definitions 7 3.2 Symbols and abbreviated terms.7 3.3 Conventions 7 3.3.1 Data type names and references to data types 7 3.3.2 Vocabulary for requirements7 4

24、Bus category 8 5 Access to instance and device data8 6 Protocol specific behavior.8 7 Protocol specific usage of general data types.8 8 Protocol specific common data types DTMCIPDataTypeSchema .8 9 Network management data types11 9.1 General .11 9.2 Node address11 9.3 Scanner/Master Bus Parameter Se

25、t (CIP) FDTCIPDTMParameterSchema .11 10 Communication data types .16 11 Channel parameter data types17 12 Device identification .19 12.1 Device type identification data types FDTCIPIdentSchema.19 12.2 Topology scan data types19 12.3 Scan identification data types FDTCIPScanIdentSchema .19 12.4 Devic

26、e type identification data types FDTCIPDeviceTypeIdentSchema.20 Annex A (informative) Implementation hints .21 Bibliography22 Figure 1 Part 502 of the IEC 62453 series .5 Table 1 Protocol specific usage of general attributes .8 PD CLC/TR 62453-502:2009Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STAN

27、DARDS, 19/04/2010 02:24, Uncontrolled Copy, (c) BSITR 62453-502 IEC:2009(E) 5 INTRODUCTION This part of IEC 62453 is an interface specification for developers of FDT (Field Device Tool) components for function control and data access within a client/server architecture. The specification is a result

28、 of an analysis and design process to develop standard interfaces to facilitate the development of servers and clients by multiple vendors that need to interoperate seamlessly. With the integration of fieldbusses into control systems, there are a few other tasks which need to be performed. In additi

29、on to fieldbus- and device-specific tools, there is a need to integrate these tools into higher-level system-wide planning- or engineering tools. In particular, for use in extensive and heterogeneous control systems, typically in the area of the process industry, the unambiguous definition of engine

30、ering interfaces that are easy to use for all those involved is of great importance. A device-specific software component, called DTM (Device Type Manager), is supplied by the field device manufacturer with its device. The DTM is integrated into engineering tools via the FDT interfaces defined in th

31、is specification. The approach to integration is in general open for all kind of fieldbusses and thus meets the requirements for integrating different kinds of devices into heterogeneous control systems. Figure 1 shows how IEC/TR 62453-502 is aligned in the structure of IEC 62453 series. Part 502Com

32、municationImplementationfor common object model IEC 61784 CPF 2Figure 1 Part 502 of the IEC 62453 series PD CLC/TR 62453-502:2009Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 19/04/2010 02:24, Uncontrolled Copy, (c) BSI 6 TR 62453-502 IEC:2009(E) FIELD DEVICE TOOL (FDT) INTERFACE SPECIFICAT

33、ION Part 502: Communication implementation for common object model IEC 61784 CPF 2 1 Scope IEC/TR 62453-502, which is a technical report, provides information for integrating the CIP technology into the COM based implementation of FDT interface specification (IEC/TR 62453-5). Communication Profile F

34、amily 2 (commonly known as CIP1) defines communication profiles based on IEC 61158-2 Type 2, IEC 61158-3-2, IEC 61158-4-2, IEC 61158-5-2, and IEC 61158-6-2, IEC 62026-3. The basic profiles CP 2/1 (ControlNet2), CP 2/2 (EtherNet/IP3), and CP 2/3 (DeviceNet1) are defined in IEC 61784-1 and IEC 61784-2

35、. An additional communication profile (CompoNet),also based on CIP, is defined in 13. This part of IEC 62453 specifies communication and other services. This specification neither contains the FDT specification nor modifies it. 2 Normative references The following referenced documents are indispensa

36、ble for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. IEC 61158-2, Industrial communication networks Fieldbus specifications Part 2: Physical layer spec

37、ification and service definition IEC 61158-3-2, Industrial communication networks Fieldbus specifications Part 3-2: Data-link layer service definition Type 2 elements IEC 61158-4-2, Industrial communication networks Fieldbus specifications Part 4-2: Data-link layer protocol specification Type 2 elem

38、ents IEC 61158-5-2, Industrial communication networks Fieldbus specifications Part 5-2: Application layer service definition Type 2 elements 1CIP (Common Industrial Protocol), DeviceNet and CompoNet are trade names of Open DeviceNet Vendor Association, Inc (ODVA). This information is given for the c

39、onvenience of users of this International Standard and does not constitute an endorsement by IEC of the trade name holder or any of its products. Compliance to this standard does not require use of the trade names CIP, DeviceNet or CompoNet. Use of the trade names CIP, DeviceNet or CompoNet requires

40、 permission of Open DeviceNet Vendor Association,Inc. 2ControlNet is a trade name of ControlNet International, Ltd. This information is given for the convenience of users of this International Standard and does not constitute an endorsement by IEC of the trademark holder or any of its products. Comp

41、liance to this profile does not require use of the trade name ControlNet. Use of the trade name ControlNet requires permission of ControlNet International, Ltd. 3EtherNet/IP is a trade name of ControlNet International, Ltd. and Open DeviceNet Vendor Association, Inc. This information is given for th

42、e convenience of users of this International Standard and does not constitute an endorsement by IEC of the trademark holder or any of its products. Compliance to this profile does not require use of the trade name EtherNet/IP. Use of the trade name EtherNet/IP requires permission of either ControlNe

43、t International, Ltd. or Open DeviceNet Vendor Association, Inc. PD CLC/TR 62453-502:2009Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 19/04/2010 02:24, Uncontrolled Copy, (c) BSITR 62453-502 IEC:2009(E) 7 IEC 61158-6-2, Industrial communication networks Fieldbus specifications Part 6-2: Ap

44、plication layer protocol specification Type 2 elements IEC 61784-1, Industrial communication networks Profiles Part 1: Fieldbus profiles IEC 61784-2, Industrial communication networks Profiles Part 2: Additional fieldbus profiles for real-time networks based on ISO/IEC 8802-3 IEC 62026-3, Low-voltag

45、e switchgear and controlgear Controller-device interfaces (CDIs) Part 3: DeviceNet IEC 62453-1:2009, Field Device Tool (FDT) interface specification Part 1: Overview and guidance IEC 62453-2:2009, Field Device Tool (FDT) interface specification Part 2: Concepts and detailed description IEC/TR 62453-

46、41:2009, Field Device Tool (FDT) interface specification Part 41: Object model integration profile Common object model IEC 62453-302:2009, Field Device Tool (FDT) interface specification Part 302: Communication profile integration IEC 61784 CPF 2 3 Terms, definitions, symbols, abbreviated terms and

47、conventions 3.1 Terms and definitions For the purpose of this document, the terms and definitions given in IEC 62453-1 and IEC 62453-2 apply. 3.2 Symbols and abbreviated terms For the purpose of this document, the symbols and abbreviations given in IEC 62453-1, IEC 62453-2 and the following apply. C

48、IP Common Industrial Protocol CP Communication Profile IEC 61784-1 CPF Communication Profile Family IEC 61784-1 EDS Electronic Data Sheet ISO 15745 UML Unified Modelling Language ISO/IEC 19501 3.3 Conventions 3.3.1 Data type names and references to data types The conventions for naming and referenci

49、ng of data types are explained in IEC 62453-2 Clause A.1 3.3.2 Vocabulary for requirements The following expressions are used when specifying requirements. Usage of “shall” or “Mandatory” No exceptions allowed. PD CLC/TR 62453-502:2009Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 19/04/2010 02:24, Uncontrolled Copy, (c) BSI 8 TR 62453-502 IEC:2009(E) Usage of “should” or “Recommended