BS PD CLC TR 62453-41-2009 2500 Field device tool (FDT) interface nspecification — nPart 41 Object model integration profile — nCommon object model《场器件工具接口规范（FDT） 第41部分 对象模型综合剖面.pdf

《BS PD CLC TR 62453-41-2009 2500 Field device tool (FDT) interface nspecification — nPart 41 Object model integration profile — nCommon object model《场器件工具接口规范（FDT） 第41部分 对象模型综合剖面.pdf》由会员分享，可在线阅读，更多相关《BS PD CLC TR 62453-41-2009 2500 Field device tool (FDT) interface nspecification — nPart 41 Object model integration profile — nCommon object model《场器件工具接口规范（FDT） 第41部分 对象模型综合剖面.pdf（330页珍藏版）》请在麦多课文档分享上搜索。

1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationField device tool (FDT) interfacespecification Part 41: Object model integration profile Common object modelPD CLC/TR 62453-41:2009Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STA

2、NDARDS, 15/04/2010 08:18, Uncontrolled Copy, (c) BSINational forewordThis Published Document is the UK implementation of CLC/TR 62453-41:2009.The UK participation in its preparation was entrusted to Technical CommitteeAMT/7, Industrial communications: process measurement and control, including field

3、bus.A list of organizations represented on this committee can be obtained onrequest to its secretary.This publication does not purport to include all the necessary provisions of acontract. Users are responsible for its correct application. BSI 2010ISBN 978 0 580 62567 1ICS 25.040.40; 35.100.05; 35.1

4、10Compliance with a British Standard cannot confer immunity fromlegal obligations.This Published Document was published under the authority of theStandards Policy and Strategy Committee on 31 January 2010Amendments issued since publicationAmd. No. Date Text affectedBRITISH STANDARDPD CLC/TR 62453-41

5、:2009Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 15/04/2010 08:18, Uncontrolled Copy, (c) BSITECHNICAL REPORT CLC/TR 62453-41 RAPPORT TECHNIQUE TECHNISCHER BERICHT November 2009 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique

6、 Europisches Komitee fr Elektrotechnische Normung Central Secretariat: Avenue Marnix 17, B - 1000 Brussels 2009 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. CLC/TR 62453-41:2009 E ICS 25.040.40; 35.100.05; 35.110 English version F

7、ield device tool (FDT) interface specification - Part 41: Object model integration profile - Common object model (IEC/TR 62453-41:2009) Spcification des interfaces des outils des dispositifs de terrain (FDT) - Partie 41: Profil dintgration des modles objet - Modle objet commun (CEI/TR 62453-41:2009)

8、 Field Device Tool (FDT)-Schnittstellenspezifikation - Teil 41: Profil zur Integration des Objektmodells - Allgemeines Objektmodell (COM) (IEC/TR 62453-41:2009) This Technical Report was approved by CENELEC on 2009-10-01. CENELEC members are the national electrotechnical committees of Austria, Belgi

9、um, Bulgaria, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. PD CLC/TR 6

10、2453-41:2009Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 15/04/2010 08:18, Uncontrolled Copy, (c) BSICLC/TR 62453-41:2009 - 2 - Foreword The text of document 65E/64/CDV, future edition 1 of IEC/TR 62453-41, prepared by Devices and integration in enterprise systems, of IEC TC 65, Industrial

11、-process measurement, control and automation, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as CLC/TR 62453-41 on 2009-10-01. Annex ZA has been added by CENELEC. _ Endorsement notice The text of the Technical Report IEC/TR 62453-41:2009 was approved by CENELEC as a Techn

12、ical Report without any modification. _ PD CLC/TR 62453-41:2009Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 15/04/2010 08:18, Uncontrolled Copy, (c) BSI- 3 - CLC/TR 62453-41:2009 Annex ZA (normative) Normative references to international publications with their corresponding European publi

13、cations The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE When an international publication ha

14、s been modified by common modifications, indicated by (mod), the relevant EN/HD applies. Publication Year Title EN/HD Year IEC 61784 series Industrial communication networks - Profiles EN 61784 series IEC 62453-1 2009 Field device tool (FDT) interface specification - Part 1: Overview and guidance EN

15、 62453-1 2009 IEC 62453-2 2009 Field device tool (FDT) interface specification - Part 2: Concepts and detailed description EN 62453-2 2009 _ PD CLC/TR 62453-41:2009Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 15/04/2010 08:18, Uncontrolled Copy, (c) BSI 2 TR 62453-41 IEC:2009(E) CONTENTS I

16、NTRODUCTION.13 1 Scope.14 2 Normative references .14 3 Terms, definitions, symbols, abbreviated terms and conventions 14 3.1 Terms and definitions 14 3.2 Abbreviations 15 3.3 Conventions 15 4 Implementation concept15 4.1 Technological orientation 15 4.2 Implementation of abstract FDT object model16

17、4.2.1 General .16 4.2.2 FDT Frame Application (FA) 16 4.2.3 Device Type Manager (DTM) .17 4.2.4 Presentation object17 4.2.5 FDT-Channel object.17 4.3 Object interaction 18 4.3.1 Parameter interchange via XML.18 4.3.2 Examples of usage 19 4.4 Implementation of DTM data persistence and synchronization

18、.21 4.4.1 Persistence overview.21 4.4.2 Persistence interfaces .22 4.5 DTM state machine .22 5 General concepts .25 5.1 General .25 5.2 Overview of task related FDT interfaces 25 5.3 Return values of interface methods .28 5.4 Dual interfaces 28 5.5 Unicode.28 5.6 Asynchronous versus synchronous beha

19、vior .28 5.7 ProgIds .29 5.8 Implementation of DTM, DTM device type and hardware identification information 29 5.8.1 Device identification 29 5.8.2 Protocol specific transformation style sheet (xsl) .31 5.8.3 Semantic identification information 31 5.8.4 Device assignment 31 5.8.5 Regular expression

20、specification .32 5.9 Implementation of slave redundancy .32 5.9.1 General .32 5.9.2 Topology import/export32 6 Implementation of FDT services: FDT interfaces.33 6.1 Overview of the FDT interfaces .33 6.2 FDT objects.33 6.2.1 FDT object model 33 6.2.2 Avalability of interface methods .36 PD CLC/TR 6

21、2453-41:2009Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 15/04/2010 08:18, Uncontrolled Copy, (c) BSITR 62453-41 IEC:2009(E) 3 6.3 Device Type Manager40 6.3.1 Interface IDtm40 6.3.2 Interface IDtm249 6.3.3 Interface IDtmActiveXInformation 51 6.3.4 Interface IDtmApplication.52 6.3.5 Interfa

22、ce IDtmChannel.54 6.3.6 Interface IDtmDocumentation 55 6.3.7 Interface IDtmDiagnosis 56 6.3.8 Interface IDtmImportExport58 6.3.9 Interface IDtmInformation 60 6.3.10 Interface IDtmInformation2 61 6.3.11 Interface IDtmOnlineDiagnosis 62 6.3.12 Interface IDtmOnlineParameter .63 6.3.13 Interface IDtmPar

23、ameter .66 6.3.14 Interface IFdtCommunicationEvents 67 6.3.15 Interface IFdtCommunicationEvents2 70 6.3.16 Interface IFdtEvents 71 6.3.17 Interface IDtmHardwareIdentification.74 6.3.18 Interface IDtmSingleDeviceDataAccess .76 6.3.19 Interface IDtmSingleInstanceDataAccess 79 6.4 DTM ActiveXControl 81

24、 6.4.1 Interface IDtmActiveXControl.81 6.4.2 Init.81 6.4.3 PrepareToRelease.82 6.5 FDT Channel.83 6.5.1 Interface IFdtChannel 83 6.5.2 Interface IFdtChannelActiveXInformation.85 6.5.3 Interface IFdtCommunication.88 6.5.4 Interface IFdtChannelSubTopology95 6.5.5 Interface IFdtChannelSubTopology299 6.

25、5.6 Interface IFdtChannelScan 99 6.5.7 Interface IFdtFunctionBlockData101 6.6 Channel ActiveXControl 103 6.6.1 Interface IFdtChannelActiveXControl .103 6.6.2 Interface IFdtChannelActiveXControl2 .105 6.7 Block Type Manager106 6.7.1 Interface IBtm106 6.7.2 Interface IBtmInformation 107 6.7.3 Interfac

26、e IBtmParameter107 6.8 BTM ActiveXControl 108 6.8.1 General .108 6.8.2 Interface IBtmActiveXControl.108 6.9 Frame Application .109 6.9.1 Interface IDtmEvents .109 6.9.2 Interface IDtmEvents2 .118 6.9.3 Interface IDtmScanEvents .119 6.9.4 Interface IDtmAuditTrailEvents 121 6.9.5 Interface IFdtActiveX

27、 .123 6.9.6 Interface IFdtActiveX2 .124 PD CLC/TR 62453-41:2009Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 15/04/2010 08:18, Uncontrolled Copy, (c) BSI 4 TR 62453-41 IEC:2009(E) 6.9.7 Interface IFdtBulkData.127 6.9.8 Interface IFdtContainer129 6.9.9 Interface IFdtDialog .132 6.9.10 Interf

28、ace IFdtTopology.133 6.9.11 Interface IDtmRedundancyEvents139 6.9.12 Interface IDtmSingleDeviceDataAccessEvents 140 6.9.13 Interface IDtmSingleInstanceDataAccessEvents143 6.9.14 Interface IFdtBtmTopology.144 7 FDT sequence charts .145 7.1 DTM peer to peer communication145 7.1.1 General .145 7.1.2 Es

29、tablish a peer-to-peer connection between DTM and device 145 7.1.3 Asynchronous connect for a peer-to-peer connection 145 7.1.4 Asynchronous disconnect for a peer-to-peer connection 146 7.1.5 Asynchronous transaction for a peer-to-peer connection146 7.2 Nested communication 147 7.2.1 General .147 7.

30、2.2 Generate system topology .148 7.2.3 Establish a system connection between DTM and device.150 7.2.4 Asynchronous transaction for a system connection151 7.3 Topology scan.153 7.3.1 Scan network.153 7.3.2 Cancel topology scan 153 7.3.3 Provisional scan result notifications.154 7.3.4 Scan for commun

31、ication hardware.155 7.3.5 Manufacturer specific device identification.156 7.4 Registration of protocol specific FDT schemas 158 7.5 Configuration of a fieldbus master .160 7.6 Starting and releasing applications161 7.7 Channel access.162 7.8 DCS Channel assignment163 7.9 Printing of DTM specific do

32、cuments.167 7.10 Printing of Frame Application specific documents168 7.10.1 General .168 7.10.2 Processing a document .169 7.10.3 Rules for use of DTM specific style sheets 171 7.11 Propagation of changes.172 7.12 Locking .174 7.12.1 Locking for non-synchronized DTMs 174 7.12.2 Locking for synchroni

33、zed DTMs.175 7.13 Instantiation and release .177 7.13.1 Instantiation of a new DTM 177 7.13.2 Instantiation of an existing DTM.177 7.13.3 Instantiation of a DTM ActiveX user interface178 7.13.4 Release of a DTM user interface .179 7.14 Persistent storage of a DTM179 7.14.1 State machine of instance

34、data179 7.14.2 Saving instance data of a DTM 181 7.14.3 Reload of a DTM object for another instance .182 PD CLC/TR 62453-41:2009Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 15/04/2010 08:18, Uncontrolled Copy, (c) BSITR 62453-41 IEC:2009(E) 5 7.14.4 Copy and versioning of a DTM instance.18

35、2 7.15 Audit trail.183 7.16 Comparison of two instance data sets .185 7.16.1 Comparison without user interface.185 7.16.2 Comparison with user interface .185 7.17 Failsafe data access186 7.18 Set or modify device address with user interface .187 7.19 Set or modify known device addresses without user

36、 interface188 7.20 Display or modify all child device addresses with user interface 189 7.21 Device initiated data transfer.190 7.22 Starting and releasing DTM user interface in modal dialog 191 7.23 Parent component handling redundant slave .193 7.24 Initialization of a Channel ActiveX control194 7

37、.24.1 General .194 7.24.2 Supports IFdtChannelActiveXcontrol2195 7.24.3 Does not support IFdtChannelActiveXControl2 195 7.25 DTM upgrade 196 7.25.1 General .196 7.25.2 Saving data from a DTM to be upgraded196 7.25.3 Loading data in the replacement DTM .197 7.26 Usage of IDtmSingleDeviceDataAccess:Re

38、adRequest / Write Request 198 7.27 Instantiation of DTM and BTM .199 8 Installation issues.201 8.1 Registry and device information 201 8.1.1 Visibility of business objects of a DTM.201 8.1.2 Component categories.201 8.1.3 Registry entries .202 8.1.4 Installation issues202 8.1.5 Microsofts standard c

39、omponent categories manager.203 8.1.6 Building a Frame Application-database of supported devices.203 8.1.7 DTM registration203 8.2 Paths and file information204 8.2.1 Path information provided by a DTM204 8.2.2 Paths and persistency .204 8.2.3 Multi-user systems 205 9 Description of data types, para

40、meters and structures .205 9.1 Ids.205 9.2 Data type definitions205 Annex A (normative) FDT IDL 207 Annex B (normative) Mapping of services to interface methods223 Annex C (normative) FDT XML schemas231 Annex D (informative) FDT XML styles Documentation .310 Annex E (informative) FDT XSL Transformat

41、ion.314 Annex F (normative) Channel schema .316 Annex G (normative) FDT version interoperability guide 318 Annex H (informative) Implementation with .Net technology.323 Annex I (informative) Trade names 325 PD CLC/TR 62453-41:2009Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 15/04/2010 08:1

42、8, Uncontrolled Copy, (c) BSI 6 TR 62453-41 IEC:2009(E) Bibliography326 Figure 1 Part 41 of the IEC 62453 series .13 Figure 2 Frame Application interfaces16 Figure 3 DTM interfaces 17 Figure 4 FDT Client/server relationship via XML 18 Figure 5 Data access and storage20 Figure 6 Communication 20 Figu

43、re 7 Documentation.21 Figure 8 Parameter verification in case of failsafe devices .21 Figure 9 State machine of a DTM.23 Figure 10 Device identification.29 Figure 11 Structural overview 30 Figure 12 Interfaces of FDT objects DTM and DtmActiveXControl.34 Figure 13 Interfaces of FDT object Frame Appli

44、cation.35 Figure 14 FDT objects FDT-Channel.35 Figure 15 FDT objects BTM and BtmActiveXControl .36 Figure 16 Peer to peer connection between DTM and device.145 Figure 17 Asynchronous connect (peer to peer).146 Figure 18 Asynchronous disconnect (peer to peer) 146 Figure 19 Asynchronous transaction (p

45、eer to peer)147 Figure 20 System-topology 148 Figure 21 Generation of system topology by Frame Application .149 Figure 22 Generation of system topology Participation of DTM .150 Figure 23 System connection (across communication hierarchy)151 Figure 24 Asynchronous transactions (system connection) 15

46、2 Figure 25 Scan network topology.153 Figure 26 Cancel topology scan.154 Figure 27 Provisional topology scan.155 Figure 28 Scan for communication hardware .156 Figure 29 Manufacturer specific device identification .158 Figure 30 Add protocol specific schemas to Frame Applications schema sub path .15

47、9 Figure 31 Frame Application reads protocol specific device identification information of DTMDeviceTypes160 Figure 32 Bus master configuration161 Figure 33 Starting and releasing applications.162 Figure 34 Channel access .163 Figure 35 DCS channel assignment single DTM.164 Figure 36 Sequence of cha

48、nnel assignement for a single DTM 165 Figure 37 Modular DTM structure.166 Figure 38 Channel assignment for modular DTMs167 Figure 39 Printing of DTM specific documents .168 Figure 40 Printing of Frame Application specific documents.169 PD CLC/TR 62453-41:2009Licensed Copy: Wang Bin, ISO/EXCHANGE CHI

49、NA STANDARDS, 15/04/2010 08:18, Uncontrolled Copy, (c) BSITR 62453-41 IEC:2009(E) 7 Figure 41 Report generation (Frame Application style).170 Figure 42 Report generation (device vendor specific style) 171 Figure 43 Propagation of changes .173 Figure 44 Locking for non-synchronized DTMs.175 Figure 45 Locking for synchronized DTMs .177 Figure 46 Instantiation of a new DTM.177 Figure 47 Instantiat