BS ISO IEC 29133-2012 Information technology Automatic identification and data capture techniques Quality test specification for rewritable hybrid media data carriers《信息技术.pdf

《BS ISO IEC 29133-2012 Information technology Automatic identification and data capture techniques Quality test specification for rewritable hybrid media data carriers《信息技术.pdf》由会员分享，可在线阅读，更多相关《BS ISO IEC 29133-2012 Information technology Automatic identification and data capture techniques Quality test specification for rewritable hybrid media data carriers《信息技术.pdf（30页珍藏版）》请在麦多课文档分享上搜索。

1、raising standards worldwide NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW BSI Standards Publication Information technology Automatic identification and data capture techniques Quality test specification for rewritable hybrid media data carriers BS ISO/IEC 29133:2010National

2、foreword This British Standard is the UK implementation of ISO/IEC 29133:2010. The UK participation in its preparation was entrusted to Technical Committee IST/34, Automatic identification and data capture techniques. A list of organizations represented on this committee can be obtained on request t

3、o its secretary. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2012 Published by BSI Standards Limited 2012 ISBN 978 0 580 81100 5 ICS 35.040 Compliance with a British Stan

4、dard cannot confer immunity from legal obligations. This British Standard was published under the authority of the Standards Policy and Strategy Committee on 30 November 2012. Amendments issued since publication Amd. No. Date Text affected BRITISH STANDARD BS ISO/IEC 29133:2010Reference number ISO/I

5、EC 29133:2010(E) ISO/IEC 2010 INTERNATIONAL STANDARD ISO/IEC 29133 First edition 2010-05-15 Information technology Automatic identification and data capture techniques Quality test specification for rewritable hybrid media data carriers Technologies de linformation Techniques automatiques didentific

6、ation et de capture des donnes Spcification dessai qualitatif pour porteurs de donnes de milieux hybrides BS ISO/IEC 29133:2010ISO/IEC 29133:2010(E) PDF disclaimer ThisP DF file may contain embedded typefaces. In accordance with Adobes licensing policy, this file may be printed or viewed bu t shall

7、not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In downloading this file, parties accept therein the responsibility of not infringing Adobes licensing policy. The ISO Central Secretariat accepts no liability in this area. Ad

8、obe is a trademark of Adobe Syste ms Incorporated. Details oft he software products used to create thisP DF file can be found in the General Info relative to the file;t he PDF-creation parameters were optimized for printing. Every care has been taken to ensure that thef ile is suitable for use by IS

9、O member bodies. In the unlikely event that a problem relating to it isf ound, please inform the Central Secretariat at the address given below . COPYRIGHT PROTECTED DOCUMENT ISO/IEC 2010 All rights reserved. Unless otherwises pecified, no part of this publicationm ay be reproduced or utilized in an

10、y form or by any means, electronic or mechanical, i ncluding p hotocopying and microfilm, w ithout p ermission in w riting from e ither ISO at t he address b e low or ISOs member body in the country of the requester. ISO copyright office Case postale 56 CH-1211 Geneva 20 Tel. + 41 22 749 01 11 Fax +

11、 41 22 749 09 47 E-mail copyrightiso.org Web www.iso.org Published inS witzerland ii ISO/IEC 2010 All rights reserved BS ISO/IEC 29133:2010ISO/IEC 29133:2010(E) ISO/IEC 2010 All rights reserved iii Contents Page Foreword iv Introduction.v 1S cope1 2N ormative references2 3T erms and definitions .2 4

12、S ymbols and abbreviations2 5H ybrid media functions and process description 3 6C onformance tests for the Rewritable Media system 3 6.1 General .3 6.2 Product conformance .3 6.3 Process control factors. .4 6.4 Process control methods .5 7C onformance tests for RFID tag component 6 7.1 General .6 7.

13、2 Product conformance .6 7.3 RFID performance testing.6 7.4 Process control methods .7 8C onformance considerations to integrate the different data carrier technologies8 8.1 Overview.8 8.2 Data and memorym apping considerations8 8.3 Processing the RFID air interface commands8 8.4 Locking of data on

14、the RFID tag 8 8.5 Erase and rewrite cycle: RFID implications8 8.6 RFID and sensors. .9 8.7 Co-ordinating the data flows9 Annex A (informative) Example of Rewritable Hybrid Media Data Carrier10 Annex B (informative) In-line qualitye valuation mechanism. 12 Annex C (informative) Process control metho

15、d to estimate the end of life14 Annex D (informative) Operational flowcharts.16 Bibliography20 BS ISO/IEC 29133:2010ISO/IEC 29133:2010(E) iv ISO/IEC 2010 All rights reserved Foreword ISO ( the International O rganization for Standardization) and I EC ( the International Electrotechnical Commission)

16、form the specialized sys temf or worldwide standard ization. National bodies that are members of ISO o r IEC participate in t he development of I nternational Standards t hrough technical committees established by the respective o rganization t o deal with p articular fields o f technical a ctivity.

17、 I SO a nd I EC technical committees collaborate in fields ofm utual interest. Other internationa l organizations, governmental and n on-governmental, i n liaison with ISO and IEC, also take part in t he work. I n the field of i nformation technology, ISO and IEC have established a joint technical c

18、ommittee, ISO/IEC JTC 1 . International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2 . The main task of t he joint technical committee is t o prepare International S tandards. Draft International Standards adopted by the joint technica l committee are ci

19、rculated to national bodies for voting. Publication as an International Standard requires approval by at least 75 % of the national bodies casting a vote. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held respo

20、nsible for identifying any or all such patent rights. ISO/IEC 29133 was p repared by J oint Technical C ommittee ISO/IEC JTC 1, Information technology, Subcommittee SC 31, Automatic identification and data capture techniques. BS ISO/IEC 29133:2010ISO/IEC 29133:2010(E) ISO/IEC 2010 All rights reserve

21、d v Introduction Traditionally, linear bar codes and two-dimensional symbols have been considered as write once/read many times ( WORM) t echnologies. The advent of R ewritable Media, which can completely change the displayed information, provides applications with an opportunity to erase previously

22、 encoded data carriers and human readable data and to overwrite this with new data. There is a requirement to ensure that Rewritable Media can be fully integrated with pre-existingW ORM applications. Additionally, R ewritable Media c an b e combinedw ith rewritable R FID (radio frequencyi dentificat

23、ion) technologies to create what is called a Rewritable Hybrid Media product. In this form, the characteristics of the optical data carrier a nd R FID data c arrier c an b e used in an i ntegrated m anner in business applications . Because the rewriting procedure for each technology is different, th

24、ere is a requirement to ensure that this data is synchronised, not necessarily to be identical, on each rewriting cycle. Because the Rewritable Media and RFID tags can be re-used for a number of cycles, they can contribute to environmental improvement as they produce a s maller carbon footprint over

25、 their lifetime than current systems that use paper a nd c ard-based products. Also, by c ombining Rewritable M edia with R FID, the number o f single-use RFID labels can be reduced. Manufacturers of b ar c ode equipment and RFID equipment, and the userso f both these data capture technologies, requ

26、ire publicly available standard test specifications for the objective assessment of the quality of R ewritable H ybrid Media and its c omponent parts. S uch standards c an be referred to when developing equipment and application standards, or determining the quality of the data carriers. Such test s

27、pecifications form the basis for development of measuring equipment for process control and quality assurance purposes during the rewriting process as w ell as a fterwards. T his I nternational Standard provides r equirements a nd guidelines to achieve a specified quality requirement for application

28、s making use of Rewritable Hybrid Media. These requirements also address the fact that any batch of Rewritable Hybrid Media is heterogeneous, with some items that are relatively new being intermixed with other items that have been erased and re-written many times. Procedures outlined in this Interna

29、tional Standard ensure, irrespective of the age and number of cycles a chieved by a n item o f Rewritable Hybrid M edia, that the minimum r equired quality o utput i s maintained. The bar code symbol needs to be produced in sucha way as tob e reliably decoded at the point of use, ifi t is to fulfil

30、its basic objective as a machine-readable data carrier. Similarly, the RFID tag needs to be encoded in a correct manner to be reliably read at the point of use . This International Standard specifies the overall quality process and associated methodology for Rewritable Hybrid Media. This Internation

31、al Standard determines quality characteristics to ensure that various types of product combination and integrated Rewritable Hybrid Media system can be implemented in a reliable and robust manner. This I nternational S tandard contributes t o the interoperabilityo f data carriersa nd d evices t hat

32、support this technology. In addition, as the Rewritable Media technology develops, this International Standard will provide a benchmark to assess whether the new developments are capable of being applied ina manner compatible with existing data carriers . BS ISO/IEC 29133:2010INTERNATIONAL STANDARD

33、ISO/IEC 29133:2010(E) ISO/IEC 2010 All rights reserved 1 Information technology Automatic identification and data capture techniques Quality test specification for rewritable hybrid media data carriers 1 Scope This I nternational Standard specifies m ethodologies t o be u sed for the conformance of

34、r ewritable hybrid media data c arriers, which combine RFID t ag t echnologyw ith l inear and/or two-dimensional bar c ode symbologies that are written to ane rasable substrate. Three main product configuration types are addressed within this International Standard: Rewritable Media, which supports

35、the rewriting of linear or two-dimensiona l symbols; Rewritable Hybrid Media, which integrates the Rewritable Media with an RFID tag; Rewritable Media combinedw ith RFID technologyt hat are physically separate data carriers but still require their data encoding processes to be integrated as part of

36、a Rewritable Hybrid Media system. In particular, this International Standard defines the base requirements for Rewritable Media and Rewritable Media devices (see 6.2), defines a dditional methods f or p rocess control of t he R ewritable Media over multiple erasure and rewrite cycles (see 6.4), defi

37、nes reference standards for evaluating the RFID tag component (see 7.2 and 7.3), defines a dditional methods f or p rocess control of t he R FID component over m ultiple erasure and rewrite cycles (see 7.4), provides i nformation to ensure that the data encoded i n the bar c ode symbology and RFID d

38、ata carrier are synchronous, i.e. are derived from the same source data set (see Clause 8). NOTE Depending on t he application, the encoded d ata can be i dentical or different (e.g. one data carrier could provide additional data). Because of the interdependencyb etween the Rewritable Hybrid Media a

39、nd the rewrite device used to create the o ptical i mage, the e ntire Rewritable H ybrid Media system n eeds t o be taken into account to d efine conformance. Therefore, there is a requirement to define the capability of achieving a given print qualityg rade as defined in relevant standards. This Re

40、writable Hybrid Media system approachh as the additional advantage of not being prescriptive on the types of media and “print“ technologies that mayb e used now or developed in future. As long as a print technology/media combination meets the print quality grades, it can be considered conformant wit

41、h this International Standard. BS ISO/IEC 29133:2010ISO/IEC 29133:2010(E) 2 ISO/IEC 2010 All rights reserved 2 Normativer eferences The following referenced documents a re i ndispensable for the application of t his d ocument. For dated references, only the edition cited applies. For undated referen

42、ces, the latest edition of t he referenced document (including any amendments) applies . ISO/IEC 15415 Information technology Automatic identification and data capture techniques Bar code print quality test specification Two-dimensional symbols ISO/IEC 15416 Information technology Automatic identifi

43、cation and data capture techniques Bar code print quality test specification Linear symbols ISO/IEC 15419, Information technology Automatic identification and data capture techniques Bar code digital imaging and printing performan ce testing ISO/IEC 19762-1, Information technology Automatic identifi

44、cation and data capture (AIDC) techniques Harmonized vocabulary Part 1: General terms relating to AIDC ISO/IEC 19762-2, Information technology Automatic identification and data capture (AIDC) techniques Harmonized vocabulary Part 2: Optically readable media (ORM) ISO/IEC 19762-3, Information technol

45、ogy Automatic identification and data capture (AIDC) techniques Harmonized vocabulary Part 3: Radio frequency identification (RFID) 3 Terms and definitions For the p urposes of t his document, the terms a nd definitions given i n ISO/IEC1 9762-1, I SO/IEC 19762-2, ISO/IEC 19762-3 and the following a

46、pply . 3.1 Rewritable Hybrid Media combination of Rewritable Media and an RFID tag in an integrated product 3.2 Rewritable Media substrate, consisting of a p rotective layer, optical imaging layer and base m aterial, t hat enables r epeated writing and erasing of optical data including bar code symb

47、ologies and eye readable data 3.3 Rewritable Hybrid Media system system comprising the Rewritable Hybrid Media data carriers, the process control to achieve verifiable data carrier conformance, and the data integrity between the bar code and RFID components, whether these are integrated or separate

48、data carriers 4 Symbols and abbreviations nm nanometre R max Maximum reflectance value R min Minimum reflectance value BS ISO/IEC 29133:2010ISO/IEC 29133:2010(E) ISO/IEC 2010 All rights reserved 3 5 Hybrid media functions and process description Rewritable Media is a substrate that enables repeated

49、writing and erasing of optical data including bar code symbologies and eye readable data. This isa chieved by incorporating an optical imaging layer in the media substrate. The process of e rasing a nd t hen rewriting is normallya chieved in a device t hat c ombines the functions, or in separate devices addressing each process. Other than the system meeting the basic conformance requirements specified in Clause 6, this International Standard places n o constraints on the t