BS ISO IEC 24779-9-2015 Information technology Cross-jurisdictional and societal aspects of implementation of biometric technologies Pictograms icons and symbols for use w.pdf

《BS ISO IEC 24779-9-2015 Information technology Cross-jurisdictional and societal aspects of implementation of biometric technologies Pictograms icons and symbols for use w.pdf》由会员分享，可在线阅读，更多相关《BS ISO IEC 24779-9-2015 Information technology Cross-jurisdictional and societal aspects of implementation of biometric technologies Pictograms icons and symbols for use w.pdf（18页珍藏版）》请在麦多课文档分享上搜索。

1、BSI Standards Publication BS ISO/IEC 24779-9:2015 Information technology Cross-jurisdictional and societal aspects of implementation of biometric technologies Pictograms, icons and symbols for use with biometric systems Part 9: Vascular applicationsBS ISO/IEC 24779-9:2015 BRITISH STANDARD National f

2、oreword This British Standard is the UK implementation of ISO/IEC 24779-9:2015. The UK participation in its preparation was entrusted to Technical Committee IST/44, Biometrics. A list of organizations represented on this committee can be obtained on request to its secretary. This publication does no

3、t purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2015. Published by BSI Standards Limited 2015 ISBN 978 0 580 78718 8 ICS 01.080.50; 35.040 Compliance with a British Standard cannot confer immunity f

4、rom legal obligations. This British Standard was published under the authority of the Standards Policy and Strategy Committee on 30 November 2015. Amendments/corrigenda issued since publication Date T e x t a f f e c t e dBS ISO/IEC 24779-9:2015 Information technology Cross- jurisdictional and socie

5、tal aspects of implementation of biometric technologies Pictograms, icons and symbols for use with biometric systems Part 9: Vascular applications Technologie de linformation Aspects socitaux et trans- juridictionnels de la mise en oeuvre de technologies biomtriques Pictogrammes, icnes et symboles p

6、our lutilisation avec les systmes biomtriques Partie 9: Applications vasculaires INTERNATIONAL STANDARD ISO/IEC 24779-9 Reference number ISO/IEC 24779-9:2015(E) First edition 2015-11-01 ISO/IEC 2015 BS ISO/IEC 24779-9:2015ii ISO/IEC 2015 All rights reserved COPYRIGHT PROTECTED DOCUMENT ISO/IEC 2015,

7、 Published in Switzerland All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior written permission. P

8、ermission can be requested from either ISO at the address below or ISOs member body in the country of the requester. ISO copyright office Ch. de Blandonnet 8 CP 401 CH-1214 Vernier, Geneva, Switzerland Tel. +41 22 749 01 11 Fax +41 22 749 09 47 copyrightiso.org www.iso.org ISO/IEC 24779-9:2015(E)BS

9、ISO/IEC 24779-9:2015ISO/IEC 24779-9:2015(E)Foreword iv Introduction v 1 Scope . 1 2 Normative references 1 3 T erms and definitions . 1 4 Symbols and icons of vascular image recognition . 1 5 Symbols for use with vascular image recognition . 2 5.1 Generic symbol (vascular) 2 5.2 Symbols with body-pa

10、rts . 2 5.2.1 Hand 2 5.2.2 Finger . 3 Annex A (informative) Methodology . 4 Bibliography 5 ISO/IEC 2015 All rights reserved iii Contents PageBS ISO/IEC 24779-9:2015ISO/IEC 24779-9:2015(E) Foreword ISO (the International Organization for Standardization) and IEC (the International Electrotechnical Co

11、mmission) form the specialized system for worldwide standardization. National bodies that are members of ISO or IEC participate in the development of International Standards through technical committees established by the respective organization to deal with particular fields of technical activity.

12、ISO and IEC technical committees collaborate in fields of mutual interest. Other international organizations, governmental and non-governmental, in liaison with ISO and IEC, also take part in the work. In the field of information technology, ISO and IEC have established a joint technical committee,

13、ISO/IEC JTC 1. The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the different types of document should be noted. This document was drafted in accordanc

14、e with the editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives). Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO and IEC shall not be held responsible for identifying any or all such patent rights. De

15、tails of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents). Any trade name used in this document is information given for the convenience of users and does not constitute an

16、 endorsement. For an explanation on the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISOs adherence to the WTO principles in the Technical Barriers to Trade (TBT) see the following URL: Foreword - Supplementary information. The committe

17、e responsible for this document is ISO/IEC JTC 1, Information technology, Subcommittee SC 37, Biometrics. ISO/IEC 24779 consists of the following parts, under the general title Information technology Cross jurisdictional and societal aspects of implementation of biometric technologies Pictograms, ic

18、ons and symbols for use with biometric systems: Part 1: General principles Part 9: Vascular applications The following part is under preparation: Part 4: Fingerprint applicationsiv ISO/IEC 2015 All rights reservedBS ISO/IEC 24779-9:2015ISO/IEC 24779-9:2015(E) Introduction A major public application

19、of biometric authentication today is likely to be passports but in the near future, it is probable that biometric recognition will be used in other public terminals. These terminals will be located in a variety of environments including unsupervised, a terminal supervised by an attendant, or only pa

20、rtly supervised; for example, an attendant supervising a number of terminals or terminals observed via CCTV and an audio link. Language-independent symbols and icons that indicate the biometric modality and illustrate actions and behaviour required will be particularly important for occasional users

21、. In general, it is desirable for there to be more than one mode of presentation (e.g. visual and audible or tactile). Only visual presentation is addressed in this International Standard. A standard family of symbols and icons is required since in the absence of widely used standard symbols and ico

22、ns, manufacturers will adopt their own proprietary printed symbols and icons for display on screens. This is likely to lead to confusion for public users of self-service terminals. The vascular image recognition technology has been described in ISO/IEC/TR 24741 as one of the current biometric techno

23、logies. From the view of the application system, it has been applied to bank ATMs for counterfeit prevention of the electronic bank card and which has been shown to be effective. Moreover, there are other applications, such as physical and logical access control. ISO/IEC 2015 All rights reserved vBS

24、 ISO/IEC 24779-9:2015BS ISO/IEC 24779-9:2015Information technology Cross-jurisdictional and societal aspects of implementation of biometric technologies Pictograms, icons and symbols for use with biometric systems Part 9: Vascular applications 1 Scope This part of ISO/IEC 24779 specifies the symbols

25、 and icons to be used in conjunction with vascular image recognition. This International Standard specifies a family of symbols and icons used in association with devices for biometric enrolment, verification, and/or identification. Icons are for display on visual display screens. Symbols are printe

26、d on signs and printed documents including user documents, hand outs, training material, installation/maintenance manuals, and on case or key tops and buttons of devices. The symbols and icons are intended to show the modality of biometrics and to advise the necessity of appropriate preparation and

27、the behaviour required in order to use the biometric systems. This International Standard focuses on communication with the data capture subject. Operators could use this International Standard but they might need additional symbols and information 2 Normative references The following documents, in

28、whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. ISO/IEC 247791, Information technol

29、ogy Cross-jurisdictional and societal aspects of implementation of biometric technologies Pictograms, icons and symbols for use with biometric systems Part 1: General principles ISO/IEC 197949, Information technology Biometric data interchange formats Part 9: Vascular image data 3 T erms a nd defini

30、ti ons For the purposes of this document, the terms and definitions given in ISO/IEC 247791 and ISO/IEC 197949 apply. 4 Symbols and icons of vascular image recognition Vascular image recognition technology observe features that are not only inside the body but also hard to see by the human eye. Curr

31、ent commercial products typically use the following three parts of body for vascular image recognition. The symbol specified in 5.1 generally indicates vascular image recognition. Symbols and icons that are designed for indicating specific guidance on use of the system can be provided by vendor. INT

32、ERNATIONAL ST ANDARD ISO/IEC 24779-9:2015(E) ISO/IEC 2015 All rights reserved 1BS ISO/IEC 24779-9:2015ISO/IEC 24779-9:2015(E) The symbols with body-parts, hand and finger, specified in 5.2.1 and 5.2.2 indicate vascular image recognition with body-parts. Symbols and icons that should show the relatio

33、n to vascular image recognition shall contain the symbol specified 5.1. 5 Symbols for use with vascular image recognition 5.1 Generic symbol (vascular) Symbol No IEC 60417-6260 modified Symbol ID ISO/IEC 24779-9.1 Name Vascular image recognition, general Description To identify the modality of the b

34、iometrics (Vascular) Notes a) This symbol can represent all the vascular image recog - nition system. b) This symbol is intended to be used with the supplementary symbol to identify the part of body to be used for recognition. c) This symbol should not be rotated. Geometric form One long straight li

35、ne with five bent lines and ending with the shape of heart. Keywords Biometrics Vascular Identification Recognition 5.2 Symbols with body-parts 5.2.1 Hand Symbol No IEC 60417-6261 modified Symbol ID ISO/IEC 24779-9.2 Name Vascular image recognition, hand2 ISO/IEC 2015 All rights reservedBS ISO/IEC 2

36、4779-9:2015ISO/IEC 24779-9:2015(E) Description To identify that the biometric trait for vascular will be taken from the hand Notes a) This symbol is intended to identify Hand vascular image recognition b) This symbol should not be rotated. Geometric form One long straight line with five bent lines a

37、nd ending with the shape of heart . One line outlines the shape of a hand . Keywords Biometrics Vascular Identification Recognition 5.2.2 Finger Symbol No IEC 60417-6262 modified Symbol ID ISO/IEC 24779-9.3 Name Vascular image recognition, finger Description To identify that the biometric trait for

38、vascular will be taken from the finger Notes a) This symbol is intended to identify Finger vascular image recognition. b) This symbol should not be rotated. c) Specific guidance on use of the system to be provided by vender. Geometric form One long straight line with five bent lines and ending with

39、the shape of heart. One line outlines the shape of a finger and one line outlines the shape of a nail. Keywords Biometrics Vascular Identification Recognition ISO/IEC 2015 All rights reserved 3BS ISO/IEC 24779-9:2015ISO/IEC 24779-9:2015(E) Annex A (informative) Methodology A.1 General It is difficul

40、t to make individuals imagine the symbols and icons that are relating to vascular image recognition because vascular image used for the vascular image recognition is not easily noticeable in the social life. Therefore, specific attention was given to the subjects need to have an intuitive understand

41、ing of the meaning of this symbol. A.2 Design Symbols specified in this part of ISO/IEC 24779 were developed in accordance with ISO/IEC 80416 which sets the common requirements for creation of graphical symbols. The symbol was designed to avoid any confusion with other graphical symbols, specificall

42、y the USB symbol, and with indications of diseases such as varicose veins and spider veins. A.3 Testing Basically, testing was done in accordance with ISO 9186. However, since vascular is hard to see, the current comprehension test for symbols and icons is not effective for the development of vascul

43、ar image recognition. In the comprehension test, in order to understand what kind of graphical symbol was appropriate, additionally, the following three issues were considered: a) whether the symbol was understandable as “vascular image recognition”; b) whether the symbol appropriately indicated “va

44、scular image recognition”; c) whether the symbol did not evoke uncomfortableness.4 ISO/IEC 2015 All rights reservedBS ISO/IEC 24779-9:2015ISO/IEC 24779-9:2015(E) Bibliography 1 ISO 7000, Graphical symbols for use on equipment 1) 2 IEC 60417, Graphical symbols for use on equipment 3 ISO 7001, Graphic

45、al symbols Public information symbols 4 ISO 7239, Development and principles for application of public information symbols 5 ISO 80416-2, Basic principles for graphical symbols for use on equipment Part 2: Form and use of arrows 6 ISO 804164, Basic principles for graphical symbols for use on equipme

46、nt Part 4: Guidelines for the adaptation of graphical symbols for use on screens and displays (icons) 7 ISO 91861, Graphical symbols Test methods Part 1: Methods for testing comprehensibility 8 ISO 91862, Graphical symbols Test methods Part 2: Method for testing perceptual quality 9 ISO/IEC 115811,

47、Information technology User system interfaces and symbols Icon symbols and functions Part 1: Icons General 10 ISO/IEC 115812, Information technology User system interfaces and symbols Icon symbols and functions Part 2: Object icons 11 ISO/IEC 115813, Information technology User system interfaces and

48、 symbols Icon symbols and functions Part 3: Pointer icons 12 ISO/IEC 115815, Information technology User system interfaces and symbols Icon symbols and functions Part 5: Tool icons 13 ISO/IEC 115816, Information technology User system interfaces and symbols Icon symbols and functions Part 6: Action

49、icons 14 ISO/IEC 13251, Collection of graphical symbols for office equipment 15 ISO/IEC 18035, Information technology Icon symbols and functions for controlling multimedia software applications 16 ISO/IEC/TR 19765, Information technology Survey of icons and symbols that provide access to functions and facilities to improve the use of information technology products by the e