BS ISO IEC 18000-62-2013 Information technology Radio frequency identification for item management Parameters for air interface communications at 860 MHz to 960 MHz Type B.pdf

《BS ISO IEC 18000-62-2013 Information technology Radio frequency identification for item management Parameters for air interface communications at 860 MHz to 960 MHz Type B.pdf》由会员分享，可在线阅读，更多相关《BS ISO IEC 18000-62-2013 Information technology Radio frequency identification for item management Parameters for air interface communications at 860 MHz to 960 MHz Type B.pdf（80页珍藏版）》请在麦多课文档分享上搜索。

1、raising standards worldwide NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW BSI Standards Publication BS ISO/IEC 18000-62:2012 Information technology Radio frequency identification for item management Part 62: Parameters for air interface communications at 860 MHz to 960 MHz T

2、ype B BS ISO/IEC 18000-62:2012 BRITISH STANDARD National foreword This British Standard is the UK implementation of ISO/IEC 18000-62:2012. Together with BS ISO/IEC 18000-6:2013, BS ISO/IEC 18000-61:2012, BS ISO/IEC 18000-63:2012, and BS ISO/IEC 18000-64:2012, it supersedes BS ISO/IEC 18000-6:2010, w

3、hich is withdrawn. The UK participation in its preparation was entrusted to Technical Committee IST/34, Automatic identification and data capture techniques. A list of organizations represented on this committee can be obtained on request to its secretary. This publication does not purport to includ

4、e all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2013. Published by BSI Standards Limited 2013. ISBN 978 0 580 75346 6 ICS 35.040 Compliance with a British Standard cannot confer immunity from legal obligations. This B

5、ritish Standard was published under the authority of the Standards Policy and Strategy Committee on 28 February 2013. Amendments issued since publication Date Text affectedBS ISO/IEC 18000-62:2012Reference number ISO/IEC 18000-62:2012(E) ISO/IEC 2012INTERNATIONAL STANDARD ISO/IEC 18000-62 First edit

6、ion 2012-07-15Information technology Radio frequency identification for item management Part 62: Parameters for air interface communications at 860 MHz to 960 MHz Type B Technologies de linformation Identification par radiofrquence (RFID) pour la gestion dobjets Partie 62: Paramtres de communication

7、s dune interface radio entre 860 MHz et 960 MHz, Type B BS ISO/IEC 18000-62:2012 ISO/IEC 18000-62:2012(E) COPYRIGHT PROTECTED DOCUMENT ISO/IEC 2012 All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or me

8、chanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISOs member body in the country of the requester. ISO copyright office Case postale 56 CH-1211 Geneva 20 Tel. + 41 22 749 01 11 Fax + 41 22 749 09 47 E-mail copyrightiso.org Web www.

9、iso.org Published in Switzerland ii ISO/IEC 2012 All rights reservedBS ISO/IEC 18000-62:2012 ISO/IEC 18000-62:2012(E) ISO/IEC 2012 All rights reserved iiiContents Page Foreword iv Introduction . v 1 Scope 1 2 Conformance . 1 2.1 Claiming conformance 1 2.2 Interrogator conformance and obligations . 2

10、 2.3 Tag conformance and obligations . 2 3 Normative references 3 4 Terms, definitions, symbols and abbreviated terms . 3 4.1 Terms and definitions . 3 4.2 Symbols 3 4.3 Abbreviated terms . 4 5 Overview . 5 5.1 Parameter tables 5 6 Type B . 9 6.1 Physical layer and data coding 9 6.1.1 Interrogator p

11、ower-up waveform . 9 6.1.2 Interrogator power-down 9 6.1.3 Frequency hopping carrier rise and fall times . 10 6.1.4 FM0 return link . 11 6.1.5 Manchester forward link . 14 6.1.6 Protocol concept . 17 6.1.7 Command format . 18 6.1.8 Response format . 20 6.1.9 WAIT 20 6.1.10 Examples of a command pack

12、et 20 6.1.11 Communication sequences at packet level 21 6.2 Btree protocol and collision arbitration 22 6.2.1 Definition of data elements, bit and byte ordering 22 6.2.2 Tag memory organisation 23 6.2.3 Block security status 24 6.2.4 Overall protocol description, Btree protocol 24 6.2.5 Collision ar

13、bitration . 29 6.2.6 Commands . 31 6.2.7 Command types . 31 6.2.8 Transmission errors 58 Annex A (informative) Calculation of 16-bit cyclic redundancy checks . 59 A.1 Example CRC-16 encoder/decoder 59 A.2 Example CRC-16 calculations 60 Annex B (normative) Memory mapping 62 B.1 Unique identifier (nor

14、mative) . 62 B.1.1 Unique identifier general 62 B.1.2 Unique identifier format 62 B.1.3 Unique identifier according to ANSI 256 . 62 B.1.4 Remaining system memory 63 Annex C (informative) Tag memory map 67 C.1 Tag memory map . 67 Bibliography 68 BS ISO/IEC 18000-62:2012 ISO/IEC 18000-62:2012(E) iv I

15、SO/IEC 2012 All rights reservedForeword ISO (the International Organization for Standardization) and IEC (the International Electrotechnical Commission) form the specialized system for worldwide standardization. National bodies that are members of ISO or IEC participate in the development of Interna

16、tional Standards through technical committees established by the respective organization to deal with particular fields of technical activity. ISO and IEC technical committees collaborate in fields of mutual interest. Other international organizations, governmental and non-governmental, in liaison w

17、ith ISO and IEC, also take part in the work. In the field of information technology, ISO and IEC have established a joint technical committee, ISO/IEC JTC 1. International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2. The main task of the joint technical

18、 committee is to prepare International Standards. Draft International Standards adopted by the joint technical committee are circulated to national bodies for voting. Publication as an International Standard requires approval by at least 75 % of the national bodies casting a vote. ISO/IEC 18000-62 w

19、as prepared by Joint Technical Committee ISO/IEC JTC 1, Information technology, Subcommittee SC 31, Automatic identification and data capture techniques. ISO/IEC 18000 consists of the following parts, under the general title Information technology Radio frequency identification for item management:

20、Part 1: Reference architecture and definition of parameters to be standardized Part 2: Parameters for air interface communications below 135 kHz Part 3: Parameters for air interface communications at 13,56 MHz Part 4: Parameters for air interface communications at 2,45 GHz Part 6: Parameters for air

21、 interface communications at 860 MHz to 960 MHz General Part 61: Parameters for air interface communications at 860 MHz to 960 MHz Type A Part 62: Parameters for air interface communications at 860 MHz to 960 MHz Type B Part 63: Parameters for air interface communications at 860 MHz to 960 MHz Type

22、C Part 64: Parameters for air interface communications at 860 MHz to 960 MHz Type D Part 7: Parameters for active air interface communications at 433 MHz BS ISO/IEC 18000-62:2012 ISO/IEC 18000-62:2012(E) ISO/IEC 2012 All rights reserved vIntroduction This part of ISO/IEC 18000 describes a passive ba

23、ckscatter radio frequency identification (RFID) system that supports the following system capabilities: identification and communication with multiple tags in the field; selection of a subgroup of tags for identification or with which to communicate; reading from and writing to or rewriting data man

24、y times to individual tags; user-controlled permanently lockable memory; data integrity protection; Interrogator-to-tag communications link with error detection; tag-to-Interrogator communications link with error detection; support for both passive back-scatter tags with or without batteries. This p

25、art of ISO/IEC 18000 specifies the physical and logical requirements for a passive-backscatter, RFID system operating in the 860 MHz to 960 MHz frequency range. The system comprises Interrogators, also known as readers, and tags, also known as labels. An Interrogator transmits information to a tag b

26、y modulating an RF signal in the 860 MHz to 960 MHz frequency range. The tag receives both information and operating energy from this RF signal. Passive tags are those which receive all of their operating energy from the Interrogators RF waveform. If tags maintain a battery then they may operate usi

27、ng some passive principles; however, they do not necessarily get all their operating energy from the Interrogators RF waveform. An Interrogator receives information from a tag by transmitting a continuous-wave (CW) RF signal to the tag; the tag responds by modulating the reflection coefficient of it

28、s antenna, thereby backscattering an information signal to the Interrogator. The system is Interrogator-Talks-First (ITF), meaning that a tag modulates its antenna reflection coefficient with an information signal only after being directed to do so by an Interrogator. Interrogators and tags are not

29、required to talk simultaneously; rather, communications are half-duplex, meaning that Interrogators talk and tags listen, or vice versa. The International Organization for Standardization (ISO) and International Electrotechnical Commission (IEC) draw attention to the fact that it is claimed that com

30、pliance with this document may involve the use of patents concerning radio frequency identification technology. ISO and IEC take no position concerning the evidence, validity and scope of these patent rights. The holders of these patent rights have assured ISO and IEC that they are willing to negoti

31、ate licences under reasonable and non-discriminatory terms and conditions with applicants throughout the world. In this respect, the statements of the holders of these patent rights are registered with ISO and IEC. BS ISO/IEC 18000-62:2012 ISO/IEC 18000-62:2012(E) vi ISO/IEC 2012 All rights reserved

32、Information on the declared patents may be obtained from: Contact details Patent Holder Legal Name: Impinj, Inc. Contact for license application Name the tag responds by modulating the reflection coefficient of its antenna, thereby backscattering an information signal to the Interrogator. The system

33、 is ITF, meaning that a tag modulates its antenna reflection coefficient with an information signal only after being directed to do so by an Interrogator. In detail, this part of ISO/IEC 18000 contains Type B. Type B uses Manchester in the forward link and an adaptive binary-tree collision-arbitrati

34、on algorithm. This part of ISO/IEC 18000 specifies physical interactions (the signalling layer of the communication link) between Interrogators and tags, Interrogator and tag operating procedures and commands, the collision arbitration scheme used to identify a specific tag in a multiple-tag environ

35、ment. 2 Conformance 2.1 Claiming conformance To claim conformance with this part of ISO/IEC 18000, an Interrogator or tag shall comply with all relevant clauses of this part of ISO/IEC 18000, except those marked as “optional”. The Interrogator or tag shall also operate within local radio regulations

36、, which can further restrict operation. Relevant conformance test methods are provided in ISO/IEC TR 18047-6. Conformance can also require a license from the owner of any intellectual property utilized by said device. BS ISO/IEC 18000-62:2012 ISO/IEC 18000-62:2012(E) 2 ISO/IEC 2012 All rights reserv

37、ed2.2 Interrogator conformance and obligations To conform to this part of ISO/IEC 18000, an Interrogator shall support Type B implement the mandatory commands defined in this part of ISO/IEC 18000; modulate/transmit and receive/demodulate a sufficient set of the electrical signals defined in the sig

38、nalling layer of this part of ISO/IEC 18000 to communicate with conformant tags; and operate within the applicable local regulations. To conform to this part of ISO/IEC 18000, an Interrogator may implement any subset of the optional commands defined in this part of ISO/IEC 18000, and implement any p

39、roprietary and/or custom commands in conformance with this part of ISO/IEC 18000. To conform to this part of ISO/IEC 18000, the Interrogator shall not implement any command that conflicts with this part of ISO/IEC 18000 or any of the parts 61, 63 and 64, or require the use of an optional, proprietar

40、y, or custom command to meet the requirements of this part of ISO/IEC 18000. 2.3 Tag conformance and obligations To conform to this part of ISO/IEC 18000, a tag shall: support Type B; operate over the frequency range from 860 MHz to 960 MHz, inclusive; implement the mandatory commands defined in thi

41、s part of ISO/IEC 18000 for the supported types; modulate a backscatter signal only after receiving the requisite command from an Interrogator; and conform to local radio regulations. To conform to this part of ISO/IEC 18000, a tag may implement any subset of the optional commands defined in this pa

42、rt of ISO/IEC 18000; and implement any proprietary and/or custom commands as defined in 6.2.7.4 and 6.2.7.5. To conform to this part of ISO/IEC 18000, a tag shall not: implement any command that conflicts with this part of ISO/IEC 18000 or any of the parts 61, 63 and 64; require the use of an optional, proprietary, or custom command to meet the requirements of this part of ISO/IEC 18000; or modulate a backscatter signal unless commanded to do so by an Interrogator using the signalling layer defined in this part of ISO/IEC 18000.