BS ISO IEC 18000-4-2015 Information technology Radio frequency identification for item management Parameters for air interface communications at 2 45 GHz《信息技术 项目管理用无限射频识别 .pdf

《BS ISO IEC 18000-4-2015 Information technology Radio frequency identification for item management Parameters for air interface communications at 2 45 GHz《信息技术 项目管理用无限射频识别 .pdf》由会员分享，可在线阅读，更多相关《BS ISO IEC 18000-4-2015 Information technology Radio frequency identification for item management Parameters for air interface communications at 2 45 GHz《信息技术 项目管理用无限射频识别 .pdf（130页珍藏版）》请在麦多课文档分享上搜索。

1、BSI Standards Publication BS ISO/IEC 18000-4:2015 Information technology Radio frequency identification for item management Part 4: Parameters for air interface communications at 2,45 GHzBS ISO/IEC 18000-4:2015 BRITISH STANDARD National foreword This British Standard is the UK implementation of ISO/

2、IEC 18000-4:2015. It supersedes BS ISO/IEC 18000-4:2008 which is withdrawn. The UK participation in its preparation was entrusted to Technical Committee IST/34, Automatic identification and data capture techniques. A list of organizations represented on this committee can be obtained on request to i

3、ts secretary. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2015. Published by BSI Standards Limited 2015 ISBN 978 0 580 89177 9 ICS 35.040 Compliance with a British Standa

4、rd cannot confer immunity from legal obligations. This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 March 2015. Amendments/corrigenda issued since publication Date T e x t a f f e c t e dInformation technology Radio frequency identification

5、for item management Part 4: Parameters for air interface communications at 2,45 GHz Technologies de linformation Identification par radiofrquence (RFID) pour la gestion dobjets Partie 4: Paramtres de communications dune interface dair 2,45 GHz INTERNATIONAL STANDARD ISO/IEC 18000-4 Reference number

6、ISO/IEC 18000-4:2015(E) Third edition 2015-02-01 ISO/IEC 2015 BS ISO/IEC 18000-4:2015ii ISO/IEC 2015 All rights reserved COPYRIGHT PROTECTED DOCUMENT ISO/IEC 2015 All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form or by an

7、y means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below or ISOs member body in the country of the requester. ISO copyright office Case postale 56 CH-1211 G

8、eneva 20 Tel. + 41 22 749 01 11 Fax + 41 22 749 09 47 E-mail copyrightiso.org Web www.iso.org Published in Switzerland ISO/IEC 18000-4:2015(E)BS ISO/IEC 18000-4:2015ISO/IEC 18000-4:2015(E)Contents Page Foreword v Introduction vii 1 Scope . 1 2 Normative references 1 3 Terms and definitions . 2 4 Sym

9、bols and abbreviated terms . 3 5 General items on 2,45 GHz RFID protocols that support this part of ISO/IEC 18000 .5 5.1 Protocols . 5 5.2 Frequency 5 5.2.1 Interface definitions 5 5.3 Tag identification number . 6 5.4 Potential interference . 6 6 MODE 1: Passive backscatter RFID system 6 6.1 MODE 1

10、: General . 6 6.2 Physical layer and data coding 7 6.2.1 Interrogator power-up waveform . 7 6.2.2 Interrogator power-down 8 6.2.3 Frequency hopping carrier rise and fall times . 9 6.2.4 Forward link 9 6.2.5 FM0 return link 11 6.2.6 Cyclic redundancy check (CRC) 12 6.2.7 Protocol concept .13 6.2.8 Co

11、mmand format 14 6.2.9 Response format .15 6.2.10 WAIT 15 6.2.11 Communication sequences at packet level .16 6.3 Protocol and collision arbitration 17 6.3.1 Definition of data elements, bit and byte ordering .17 6.3.2 Tag memory organisation .18 6.3.3 Block security status18 6.3.4 Overall protocol de

12、scription .19 6.3.5 Collision arbitration .23 6.3.6 Commands 24 6.3.7 Transmission errors . 43 7 MODE 2: Long range high data rate RFID system .43 7.1 MODE 2: General 43 7.2 Modulation and coding .43 7.2.1 Forward link (only for R/W-tag) .43 7.2.2 Return link for notification (for both types of the

13、tag) 44 7.2.3 Return link for communication (only for R/W-tag) .44 7.3 General system description.45 7.4 Frame structure .46 7.4.1 Hierarchical structure 46 7.4.2 Logical channels 47 7.4.3 Physical channels .53 7.5 Channel coding and sequences 68 7.5.1 Synchronisation and CRC patterns 68 7.6 Command

14、 set for the command slot channel: CS-CH (only for R/W-tag) .68 7.6.1 Command types .68 7.6.2 Command set .69 7.6.3 Command codes 70 ISO/IEC 2015 All rights reserved iiiBS ISO/IEC 18000-4:2015ISO/IEC 18000-4:2015(E)8 MODE 3: Active RFID ITF network .72 8.1 General 72 8.2 Operational Requirements.72

15、8.3 Network Physical Layer Description .73 8.4 Network Description.73 8.4.1 General.73 8.4.2 Network Topology .73 8.5 Star Topology .76 8.5.1 General.76 8.5.2 Star Topology Data Flow 76 8.6 Trunk Topology .76 8.6.1 Trunk Coordinator Requirements .76 8.6.2 Data Flow in a Trunk Topology 77 8.7 Peer-to

16、-Peer Topology .77 8.8 Mesh Topology .78 8.8.1 Establishing a Mesh Network 78 8.9 Message Types . .81 8.9.1 Network Discovery Beacon (NDB) 83 8.9.2 Network Status Message (NSM) 87 8.9.3 Acknowledgement Message 91 8.9.4 Command Message .94 8.9.5 Data Message .95 8.9.6 Mesh Request .96 8.9.7 Mesh Data

17、 .97 8.10 Network Discovery .97 8.10.1 Methods of Network Discovery 98 8.10.2 Transmitting Network Discovery Beacons .98 8.10.3 Connectionless Network 99 8.10.4 Associated Network Connection (ANC) .100 8.11 Link Encryption Methods 102 9 Table of characteristic differences between the modes specified

18、 in this part of ISO/ IEC 18000 103 Annex A (informative) Mode 1: Memory Map 104 Annex B (informative) Mode 1: CRC 110 Annex C (normative) Mode 2: Memory Map 113 Annex D (informative) Mode 2: CRC .115 Bibliography .117 iv ISO/IEC 2015 All rights reservedBS ISO/IEC 18000-4:2015ISO/IEC 18000-4:2015(E)

19、 Foreword ISO (the International Organization for Standardization) and IEC (the International Electrotechnical Commission) form the specialized system for worldwide standardization. National bodies that are members of ISO or IEC participate in the development of International Standards through techn

20、ical committees established by the respective organization to deal with particular fields of technical activity. ISO and IEC technical committees collaborate in fields of mutual interest. Other international organizations, governmental and non-governmental, in liaison with ISO and IEC, also take par

21、t in the work. In the field of information technology, ISO and IEC have established a joint technical committee, ISO/IEC JTC 1. The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular the different app

22、roval criteria needed for the different types of document should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives). Attention is drawn to the possibility that some of the elements of this document may be the subj

23、ect of patent rights. ISO and IEC shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents).

24、Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement. For an explanation on the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISOs adherence to the WTO principles i

25、n the Technical Barriers to Trade (TBT) see the following URL: Foreword - Supplementary information The committee responsible for this document is ISO/IEC JTC 1, Information technology, SC 31, Automatic identification and data capture techniques. This third edition cancels and replaces the second ed

26、ition (ISO/IEC 18000-4:2008), of which it constitutes a minor revision with the following changes: 5.1 has become Clause 5; 5.2 has become Clause 6; 5.3 has been Clause 7; Clause 8 has been introduced; Clause 6 has become Clause 9; Clause 1, Clause 2, Clause 3, Clause 4, Clause 5, and Clause 9 have

27、been revised as necessary to also cover Clause 8. ISO/IEC 18000 consists of the following parts, under the general title Information technology Radio frequency identification for item management: Part 1: Reference architecture and definition of parameters to be standardized Part 2: Parameters for ai

28、r interface communications below 135 kHz Part 3: Parameters for air interface communications at 13,56 MHz Part 4: Parameters for air interface communications at 2,45 GHz Part 6: Parameters for air interface communications at 860 MHz to 960 MHz General Part 61: Parameters for air interface communicat

29、ions at 860 MHz to 960 MHz Type A ISO/IEC 2015 All rights reserved vBS ISO/IEC 18000-4:2015ISO/IEC 18000-4:2015(E) Part 62: Parameters for air interface communications at 860 MHz to 960 MHz Type B Part 63: Parameters for air interface communications at 860 MHz to 960 MHz Type C Part 64: Parameters f

30、or air interface communications at 860 MHz to 960 MHz Type D Part 7: Parameters for active air interface communications at 433 MHzvi ISO/IEC 2015 All rights reservedBS ISO/IEC 18000-4:2015ISO/IEC 18000-4:2015(E) Introduction This part of ISO/IEC 18000 is one of a series of International Standards an

31、d Technical Reports developed by ISO/IEC JTC 1/SC 31, WG 4 for the identification of items (item management) using radio frequency identification (RFID) technology. This part of ISO/IEC 18000 defines three 2,45 GHz protocols. Each of the specific physical/data link configurations is defined in a sep

32、arate sub-clause. The configuration descriptions include a physical layer and a data link layer. The International Organization for Standardization (ISO) and International Electrotechnical Commission (IEC) draw attention to the fact that it is claimed that compliance with this document can involve t

33、he use of patents concerning radio-frequency identification technology given in all parts of the document. ISO and IEC take no position concerning the evidence, validity, and scope of these patent rights. The holders of these patent rights have assured the ISO and IEC that they are willing to negoti

34、ate licences under reasonable and non-discriminatory terms and conditions with applicants throughout the world. In this respect, the statements of the holders of these patent rights are registered with ISO and IEC. Information can be obtained from the following companies. Contact details Patent Hold

35、er: Legal Name iControl Inc Contact for license application: Name Mode 2 is a tag talks first with battery-assisted passive tag; Mode 3 is a globally available, ubiquitous network supporting, among others, the logistics and transportation industry; agnostic to any device, commercial or otherwise, re

36、quiring global availability. The detailed technical differences between the modes are shown in the parameter tables. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only

37、the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. ISO/IEC 7816-6: 1) , Identification cards Integrated circuit cards Part 6: Interindustry data elements for interchange ISO/IEC 15963, Information technology Radio freq

38、uency identification for item management Unique identification for RF tags ISO/IEC/TR 18047-4, Information technology Radio frequency identification device conformance test methods Part 4: Test methods for air interface communications at 2,45 GHz ISO/IEC 19762 (all parts): 1) , Information technolog

39、y Automatic identification and data capture (AIDC) techniques Harmonized vocabulary 1) To be published INTERNATIONAL ST ANDARD ISO/IEC 18000-4:2015(E) ISO/IEC 2015 All rights reserved 1BS ISO/IEC 18000-4:2015ISO/IEC 18000-4:2015(E) ISO/IEC/IEEE 8802-15-4:2010, Information technology Telecommunicatio

40、ns and information exchange between systems Local and metropolitan area networks Specific requirements Part 15-4: Wireless medium access control (MAC) and physical layer (PHY) specifications for low-rate wireless personal area networks (WPANs) 3 Terms and definitions For the purposes of this documen

41、t, the terms and definitions given in ISO/IEC 19762 (all parts): 2)and the following apply. 3.1 associated has successfully negotiated a di-directional wireless link with a coordinator Note 1 to entry: Associated networks require communication be maintained and monitored for a period of time. 3.2 as

42、sociation service used to establish membership for a device communicating within the wireless network described in this International Standard 3.3 block cipher cryptographic function that operates on strings of fixed size 3.4 coordinator full-function device (FFD) capable of relaying messages Note 1

43、 to entry: If a coordinator is the principal controller of a personal area network (PAN), it is called the PAN coordinator. 3.5 data server device data termination point 3.6 device any entity that meets the ISO/IEC/IEEE 8802-15-4 medium access control (MAC), physical interface to the wireless medium

44、, and this protocol specification. Note 1 to entry: A device can be a reduced-function device (RFD) or a full function device (FFD). 3.7 encryption transformation of a message into a new representation so that privileged information is required to recover the original representation 3.8 full-function device FFD device capable of operating as a coordinator 3.9 group key key that is known only to a set of devices 2) To be published.2 ISO/IEC 2015 All rights reserved