BS ISO 9669-1995 Series 1 freight containers - Interface connections for tank containers《货运集装箱系列1 槽式集装箱的界面连接件》.pdf
《BS ISO 9669-1995 Series 1 freight containers - Interface connections for tank containers《货运集装箱系列1 槽式集装箱的界面连接件》.pdf》由会员分享,可在线阅读,更多相关《BS ISO 9669-1995 Series 1 freight containers - Interface connections for tank containers《货运集装箱系列1 槽式集装箱的界面连接件》.pdf(18页珍藏版)》请在麦多课文档分享上搜索。
1、BRITISH STANDARD BS ISO 9669:1990 (including Amendment 1:1992) Implementation of ISO 9669:1990 Series 1 freight containers Interface connections for tank containers UDC 621.869.88:621.642.06:621.643.412BSISO9669:1990 This British Standard, having been prepared under the directionof the Consumer Prod
2、ucts and Services Sector Board, was published under the authority of the Standards Boardand comes into effect on 15July1995 BSI 02-2000 The following BSI references relate to the work on this standard: Committee reference PKM/18 Draft for comment 90/42076 DC ISBN 0 580 24361 3 Committees responsible
3、 for this British Standard The preparation of this British Standard was entrusted to Technical Committee PKM/18, Freight containers, upon which the following bodies were represented: British Industrial Truck Association British International Freight Association British Railways Board Chamber of Ship
4、ping Department of Transport (Transport Industries) European Portable Tank Association (British Section) Federation of the Electronics Industry Health and Safety Executive Institute of Logistics Lloyds Register of Shipping Ports Safety Organisation Road Haulage Association Ltd. Shipowners Refrigerat
5、ed Cargo Research Association Society of Motor Manufacturers and Traders Limited Amendments issued since publication Amd. No. Date CommentsBSISO9669:1990 BSI 02-2000 i Contents Page Committee responsible Inside front cover National foreword ii Foreword iii Text of ISO 9669 1BSISO9669:1990 ii BSI 02-
6、2000 National foreword This British Standard reproduces verbatim ISO9669:1990including Amendment1:1992and implements it as the UK national standard. It supersedes BS3951-2.6:1992which is withdrawn. This British Standard is published under the direction of the Consumer Products and Services Sector Bo
7、ard whose Technical Committee PKM/18has the responsibility to: aid enquirers to understand the text; present to the responsible international committee any enquiries on interpretation, or proposals for change, and keep UK interests informed; monitor related international and European developments an
8、d promulgate them in the UK. NOTEInternational and European Standards, as well as overseas standards, are available from Customer Services, BSI,389Chiswick High Road, London W44AL. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards a
9、re responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Summary of pages This document comprises a front cover, an inside front cover, pages i and ii, theISO title page, pagesii to iv, pages 1to9 and a back cover. Th
10、is standard has been updated (see copyright date) and may have had amendments incorporated. This will be indicated in the amendment table on the inside front cover.ISO9669:1990(E) ii BSI 02-2000 Contents Page Foreword iii Section 1. General Introduction 1 1.1 Scope 1 1.2 Normative reference 1 1.3 De
11、finitions 1 1.4 Design requirements General 2 Section 2. Flange connections for containers of tank type codes70to77and85to88 2.1 General 3 2.2 Dimensions 3 2.3 Flange thickness 3 Section 3. Man-hole openings and man-hole lids for tank containers of type codes70to76and85to88 3.1 General 5 3.2 Dimensi
12、ons and characteristics 5 3.3 Marking 5 Section 4. Inlet and outlet connection screw threads for tank containers of type codes70to76and85to88 4.1 General 7 4.2 Symbols 7 4.3 Dimensions 7 4.4 Designation 7 Annex A (informative) Bibliography 9 Figure 1 Flange (see Table 1) 3 Figure 2 Man-hole and man-
13、hole lid dimensions 6 Figure 3 Thread profile and tolerance zones 7 Table 1 Dimensions (see Figure 1) 4 Table 2 Thread dimensions 8 Descriptors: Containers, freight containers, tank containers, flange connections, specifications, dimensions.ISO9669:1990(E) BSI 02-2000 iii Foreword ISO (the Internati
14、onal Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been
15、 established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standa
16、rdization. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least75%of the member bodies casting a vote. Amendment 1 to International Standard ISO9669:1990was prepared by
17、 Technical Committee ISO/TC104, Freight containers, Sub-Committee SC2, Specific purpose containers. Annex A of this amendment is for information only.iv blankISO9669:1990(E) BSI 02-2000 1 Section 1. General Introduction This International Standard aims to reduce problems in the operation of tank con
18、tainers caused by a multiplicity of different interface connections. The combined efforts of the manufacturing and operational sectors of the industry have been devoted to establishing a certain degree of international standardization, while recognizing the requirements of the various national stand
19、ards applicable in areas where tank containers are operated. It also aims to ensure that tank containers fitted with flanged interface connections are compatible with the flanges specified by the national standards used in the countries in which the container may travel. Such compatibility will impr
20、ove safety in operation by limiting the variety of connections with which the authorities and their emergency services have to deal. 1.1 Scope This International Standard specifies the characteristics of interface connections for tank containers complying with ISO1496-3. Section 1 gives the definiti
21、ons and the testing and welding requirements for interface connections. Section 2 gives a range of flange connections for tank containers, type codes70to77and85to88. Section 3 1)specifies the dimensions and characteristics of man-hole openings and man-hole lids for tank containers intended to contai
22、n liquids or pressurized dry bulk, with a test pressure not exceeding600kPa for containers of type codes70to76and85to88. Section 4 1)specifies the requirements for the interface connection screw threads. 1.2 Normative reference The following standard contains provisions which, through reference in t
23、his text, constitute provisions of this International Standard. At the time of publication, the edition indicated was valid. All standards are subject to revision, and parties to agreements based on this International Standard are encouraged to investigate the possibility of applying the most recent
24、 edition of the standard indicated below. Members of IEC and ISO maintain registers of currently valid International Standards. ISO 1496-3:, Series 1 freight containers Specification and testing Part 3: Tank containers for liquids, gases and pressurized dry bulk 2) . 1.3 Definitions For the purposes
- 1.请仔细阅读文档,确保文档完整性,对于不预览、不比对内容而直接下载带来的问题本站不予受理。
- 2.下载的文档,不会出现我们的网址水印。
- 3、该文档所得收入(下载+内容+预览)归上传者、原创作者;如果您是本文档原作者,请点此认领!既往收益都归您。
下载文档到电脑,查找使用更方便
5000 积分 0人已下载
下载 | 加入VIP,交流精品资源 |
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BSISO96691995SERIES1FREIGHTCONTAINERSINTERFACECONNECTIONSFORTANKCONTAINERS 货运 集装箱 系列 界面 连接 PDF
链接地址:http://www.mydoc123.com/p-396091.html