BS ISO 6348-2002 en_4996 Textiles Determination of mass Vocabulary《纺织品.质量测定.词汇表》.pdf

《BS ISO 6348-2002 en_4996 Textiles Determination of mass Vocabulary《纺织品.质量测定.词汇表》.pdf》由会员分享，可在线阅读，更多相关《BS ISO 6348-2002 en_4996 Textiles Determination of mass Vocabulary《纺织品.质量测定.词汇表》.pdf（6页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARD BS ISO 6348:1980 Textiles Determination of mass Vocabulary ICS 01.040.59; 59.080.01 NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBS ISO 6348:1980 This British Standard, having been prepared under the direction of the Materials and Chemicals Sector Policy and

2、 Strategy Committee, was published under the authority of the Standards Policy and Strategy Committee on 20 May 2002 BSI 20 May 2002 ISBN 0 580 39668 1 National foreword This British Standard reproduces verbatim ISO 6348:1980 and implements it as the UK national standard. It supersedes BS 1051:1992

3、which is withdrawn. The UK participation in its preparation was entrusted to Technical Committee TCI/24, Physical testing of textiles, which has the responsibility to: A list of organizations represented on this committee can be obtained on request to its secretary. Cross-references The British Stan

4、dards which implement international or European publications referred to in this document may be found in the BSI Standards Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Find” facility of the BSI Standards Electronic Catalogue. A British Standa

5、rd does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the resp

6、onsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. Summary of pages This document comprises a front cover, an inside front co

7、ver, ISO title page, the ISO foreword page, page 1 and a back cover. The BSI copyright date displayed in this document indicates when the document was last issued. Amendments issued since publication Amd. No. Date CommentsInternational Standard 6348 INTERNATIONAL ORGANIZATION FOR STANDARDIZATION.MEY

8、HAPOHAR OPTAHM3AlJdR l-i0 CTAHAPTM3AMM.ORGANISATlON INTERNATIONALE DE NORMALISATION Textiles - Determination of mass - Vocabulary Textiles - Determination de masse - Vocabulaire First edition - 1980-09-01 UDC 677.017.25 : 001.4 Descriptors : textiles, weight measurement, mass, water, vocabulary. Ref

9、. No. ISO 6348-1980 (E) ecirP desab no 1 egap FOREWORD ISO (the International Organization for Standardization) is a worldwide federation of national Standards institutes (ISO member bodies). The work of developing International Standards is carried out through ISO technical committees. Every member

10、 body interested in a subject for which a technical committee has been set up has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also tagte part in the work. Draft International Standards adopted by the technical co

11、mmittees are circulated to the member bodies for approval before their acceptance as International Standards by the ISO Council. International Standard ISO 6348 was developed by Technical Committee lSO/TC 38, Textiles, and was circulated to the member bodies in November 1978. lt has been approved by

12、 the member bodies of the following countries : Austral ia Belgium Brazil Bulgaria Canada Cyprus Czechoslovakia Denmark Egypt, Arab Rep. of Finland France The member body o on technical grounds Germany, F.R. Ghana India Israel Italy Japan Korea, Rep. of Mexico Netherlands New Zealand Poland f the fo

13、llowing country ex pressed disapproval of the document Hungary Portugal Romania South Africa, Rep. of Spain Sweden Switzerland Turkey United Kingdom USA USSR Yugoslavia 0 lanoitanretnI noitaknagrO rof ,noitakdradnatS 0891 e detnirP ni dnalreztiwS INTERNATIONAL STANDARD ISO 63484980 (E) Textiles - De

14、termination of mass - Vocabulary 1 SCOPE AND FIELD OF APPLICATION This International Standard defines the principal terms relating to the quantification of the mass of water and extractable matter contained in a textile material. The terms defined in this International Standard may be used in the de

15、termination of the commercial mass of a consignment textile material, in the determination of linear, area and volume densities of textile materials and in the determination of the composition by mass of the different components of a mixture of textile fibres. 2 TERMS AND DEFINITIONS 2.1 Properties

16、of materials 2.1.1 moisture content : The mass of water in any form in a material, determined using prescribed methods and expressed as a percentage of the mass of the moist material. 2.1.2 moisture regain : The mass of water in any form in a material, determined using prescribed methods and express

17、ed as a percentage of the mass of dried material. 2.1.3 moisture and extractable component : The mass of water in any form plus extractable matter in a material, determined using prescribed methods and expressed as a percentage of the mass of the extracted and dried material. 2.1.4 moisture regain i

18、n the Standard atmosphere : The mass of water in any form which a material contains when, after preconditioning, it Comes into equilibrium with the Standard atmosphere, determined using prescribed methods and expressed as a percentage of the mass of the dried material. 2.2 Agreed general values 2.2.

19、1 conventional moisture regain : The agreed value ap- plying to a defined material, which is used to represent the mass of water in any form which that material contains when, after preconditioning, it Comes into equilibrium with the Standard atmosphere. lt is expressed as a percentage of the mass o

20、f the dried material. 2.3 Commercial values 2.3.1 commercial moisture regain* : The agreed value to be added to the mass of a defined material (after drying it using prescribed methods) in Order to obtain its commercial mass, linear density or mass per unit area. lt is expressed as a percentage of t

21、he mass of the dried material. 2.3.2 commercial alIowance* : The agreed value to be added to the mass of a defined material (after extracting and drying it using prescribed methods) in Order to obtain its commercial mass, linear density or mass per unit area. lt is expressed as a percentage of the m

22、ass of the extracted and dried material. 2.4 Practical applications 2.4.1 commercial mass : The calculated mass that a consignment of textile material would have if either the commercial moisture regain (see 2.3.1) were added to the dried mass of the material or the commercial allowance (see 2.3.2)

23、were added to the extracted and dried mass of the material. 2.4.2 invoice mass : The mass, however determined, of a consignment of a textile material, which is declared on the invoice. lt is usually numerically equal to the commercial mass (see 2.4.1). * In the English Ianguage, the “commercial mois

24、ture regain” and the “commercial allowance” are sometimes referred to as the bconventional allowance”. 1 BS ISO 6348:1980 BSI 389 Chiswick High Road London W4 4AL BSI British Standards Institution BSI is the independent national body responsible for preparing British Standards. It presents the UK vi

25、ew on standards in Europe and at the international level. It is incorporated by Royal Charter. Revisions British Standards are updated by amendment or revision. Users of British Standards should make sure that they possess the latest amendments or editions. It is the constant aim of BSI to improve t

26、he quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this British Standard would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover. Tel: +44 (0)20 8996 9000. Fax:

27、 +44 (0)20 8996 7400. BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards. Buying standards Orders for all BSI, international and foreign standards publications should be addressed to Customer Services. T

28、el: +44 (0)20 8996 9001. Fax: +44 (0)20 8996 7001. Email: ordersbsi-. Standards are also available from the BSI website at http:/www.bsi-. In response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published as British Standards, unle

29、ss otherwise requested. Information on standards BSI provides a wide range of information on national, European and international standards through its Library and its Technical Help to Exporters Service. Various BSI electronic information services are also available which give details on all its pr

30、oducts and services. Contact the Information Centre. Tel: +44 (0)20 8996 7111. Fax: +44 (0)20 8996 7048. Email: infobsi-. Subscribing members of BSI are kept up to date with standards developments and receive substantial discounts on the purchase price of standards. For details of these and other be

31、nefits contact Membership Administration. Tel: +44 (0)20 8996 7002. Fax: +44 (0)20 8996 7001. Email: membershipbsi-. Information regarding online access to British Standards via British Standards Online can be found at http:/www.bsi- Further information about BSI is available on the BSI website at h

32、ttp:/www.bsi-. Copyright Copyright subsists in all BSI publications. BSI also holds the copyright, in the UK, of the publications of the international standardization bodies. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval sys

33、tem or transmitted in any form or by any means electronic, photocopying, recording or otherwise without prior written permission from BSI. This does not preclude the free use, in the course of implementing the standard, of necessary details such as symbols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained. Details and advice can be obtained from the Copyright & Licensing Manager. Tel: +44 (0)20 8996 7070. Fax: +44 (0)20 8996 7553. Email: copyrightbsi-.