BS ISO 6347-2017 en_8280 Textile floor coverings Consumer information《纺织地板覆盖物 消费者信息》.pdf

《BS ISO 6347-2017 en_8280 Textile floor coverings Consumer information《纺织地板覆盖物 消费者信息》.pdf》由会员分享，可在线阅读，更多相关《BS ISO 6347-2017 en_8280 Textile floor coverings Consumer information《纺织地板覆盖物 消费者信息》.pdf（14页珍藏版）》请在麦多课文档分享上搜索。

1、BS ISO 6347:2017 Textile floor coverings Consumer information BSI Standards Publication WB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06BS ISO 6347:2017 BRITISH STANDARD National foreword This British Standard is the UK implementation of ISO 6347:2017. The UK participation in its preparation

2、 was entrusted to Technical Committee PRI/3, Textile floor coverings. A list of organizations represented on this committee can be obtained on request to its secretary. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct appl

3、ication. The British Standards Institution 2017. Published by BSI Standards Limited 2017 ISBN 978 0 580 90409 7 ICS 97.020; 97.150 Compliance with a British Standard cannot confer immunity from legal obligations. This British Standard was published under the authority of the Standards Policy and Str

4、ategy Committee on 31 March 2017. Amendments/corrigenda issued since publication Date T e x t a f f e c t e dBS ISO 6347:2017 ISO 2017 Textile floor coverings Consumer information Revtements de sol textiles Information du consommateur INTERNATIONAL STANDARD ISO 6347 Third edition 2017-02 Reference n

5、umber ISO 6347:2017(E)BS ISO 6347:2017ISO 6347:2017(E)ii ISO 2017 All rights reserved COPYRIGHT PROTECTED DOCUMENT ISO 2017, Published in Switzerland All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form or by any means, elec

6、tronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below or ISOs member body in the country of the requester. ISO copyright office Ch. de Blandonnet 8 CP 401 CH-1214 Ver

7、nier, Geneva, Switzerland Tel. +41 22 749 01 11 Fax +41 22 749 09 47 copyrightiso.org www.iso.orgBS ISO 6347:2017ISO 6347:2017(E)Foreword iv 1 Scope . 1 2 Normative references 1 3 Terms and definitions . 1 4 Product specifications to be provided to the consumer 1 4.1 Essential information 1 4.1.1 Ge

8、neral 1 4.1.2 Means of identifying the responsible supplier. 1 4.1.3 A commercial reference . 2 4.1.4 Type and fibre content of use-surface . 2 4.1.5 Dimensions . 2 4.1.6 Total thickness . 2 4.1.7 Total mass per unit area 2 4.2 Optional information . 2 Annex A (informative) Optional information for

9、the consumer 3 Bibliography 4 ISO 2017 All rights reserved iii Contents PageBS ISO 6347:2017ISO 6347:2017(E) Foreword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is

10、normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part

11、in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particula

12、r the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/ directives). Attention is drawn to the possibility that some of the elements of th

13、is document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www

14、 .iso .org/ patents). Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement. For an explanation on the meaning of ISO specific terms and expressions related to conformit y assessment, as well as information about ISOs adherence

15、to the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see the following URL: www . i s o .org/ iso/ foreword .html. The committee responsible for this document is ISO/TC 219, Floor coverings. This third edition cancels and replaces the second edition (ISO 6347:200

16、4), which has been technically revised to include the evolution in the analysis test methods for fibre content.iv ISO 2017 All rights reservedBS ISO 6347:2017INTERNATIONAL ST ANDARD ISO 6347:2017(E) Textile floor coverings Consumer information 1 Scope This document specifies the technical subjects t

17、hat form the basis for the provision of information, at the point of sale, for consumer guidance prior to and after the purchase of a textile floor covering. It is applicable to textile floor coverings of all types. 2 Normative references The following documents are referred to in the text in such a

18、 way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. ISO 1765, Machine-made textile floor coverings Determinati

19、on of thickness ISO 2076, Textiles Man-made fibres Generic names ISO 3018, Textile floor coverings Rectangular textile floor coverings Determination of dimensions ISO 6938, Textiles Natural fibres Generic names and definitions ISO 8543, Textile floor coverings Methods for determination of mass ISO 2

20、4342, Resilient and textile floor-coverings Determination of side length, edge straightness and squareness of tiles 3 Terms and definitions No terms and definitions are listed in this document. ISO and IEC maintain terminological databases for use in standardization at the following addresses: IEC E

21、lectropedia: available at h t t p :/ www .electropedia .org/ ISO Online browsing platform: available at h t t p :/ www .iso .org/ obp 4 Product specifications to be provided to the consumer 4.1 Essential information 4.1.1 General Essential information shall be provided, along with the textile floor

22、covering, at all stages from manufacturer to consumer. The manufacturer or his authorized representative shall provide the following minimum information to each consumer with each textile floor covering. The manufacturers tolerances shall be included. 4.1.2 Means of identifying the responsible suppl

23、ier This information shall contain the name of the manufacturer or his authorized representative, brand name and trade mark. ISO 2017 All rights reserved 1BS ISO 6347:2017ISO 6347:2017(E) 4.1.3 A commercial reference Information which positively and uniquely identifies the individual textile floor c

24、overing within the suppliers range, i.e. style name and/or style number. 4.1.4 Type and fibre content of use-surface Man-made fibres shall be identified in accordance with ISO 2076. Natural fibres shall be identified in accordance with ISO 6938. When analysis of fibre contents is required, it shall

25、be in accordance with ISO 1833-1 to ISO 1833-26. Attention is drawn to national legislation having requirements for labelling textiles according to fibre content. 4.1.5 Dimensions The length and width of rectangular textile floor coverings sold as rugs or mats, and the width of those sold as a singl

26、e piece (e.g. runners or wall-to-wall floor covering) shall be determined in accordance with ISO 3018. The side length, edge straightness and squareness of textile floor covering tiles, sold as modular carpet tiles, shall be determined in accordance with ISO 24342. 4.1.6 Total thickness Total thickn

27、ess shall be determined in accordance with ISO 1765. 4.1.7 Total mass per unit area Total mass per unit area shall be determined in accordance with ISO 8543. 4.2 Optional information Optional information relating to the textile floor covering shall be provided in a leaflet, or other form, at the req

28、uest of the purchaser. Annex A lists the items of optional information, some or all of which should be provided.2 ISO 2017 All rights reservedBS ISO 6347:2017ISO 6347:2017(E) Annex A (informative) Optional information for the consumer The following is a list of optional information related to the te

29、xtile floor covering which should be provided at the request of the purchaser: a) type of manufacture or construction, defined in accordance with ISO 2424; b) total pile mass per unit area, determined in accordance with ISO 8543; c) surface pile thickness, determined in accordance with ISO 1766; d)

30、surface pile density, determined in accordance with ISO 8543; e) number of tufts and/or loops per unit length and width, determined in accordance with ISO 1763; f) static electrical propensity, determined in accordance with ISO 6356; g) electrical resistance, determined in accordance with ISO 10965;

31、 h) colour fastness to light, determined in accordance with ISO 105-B02; i) colour fastness to agents other than light, e.g. colour fastness to rubbing in accordance with ISO 105-X12 and colour fastness to water in accordance with ISO 105-E01. j) appearance retention rating, determined in accordance

32、 with ISO 10361 and assessed in accordance with ISO 9405; k) pile anchorage, determined in accordance with ISO 4919; l) resistance to delamination of the substrate, determined in accordance with ISO 11857; m) flammability behaviour, determined in accordance with ISO 9239-1 and applicable national re

33、quirement; n) ignitability behaviour subjected to direct impingement of flame, determined in accordance with ISO 11925-2 and applicable national requirement; o) typical use areas for which the product is considered as suitable, indicated in accordance with ISO 10874; p) substrate details; q) install

34、ation instructions in accordance with national regulations or in accordance with the manufacturers guidelines; r) cleaning/maintenance instructions in accordance to the manufacturers guidelines; s) any other information relevant to the product and its intended use. ISO 2017 All rights reserved 3BS I

35、SO 6347:2017ISO 6347:2017(E) Bibliography 1 ISO 105-B02, Textiles Tests for colour fastness Part B02: Colour fastness to artificial light: Xenon arc fading lamp test 2 ISO 105-E01, Textiles Tests for colour fastness Part E01: Colour fastness to water 3 ISO 105-X12, Textiles Tests for colour fastness

36、 Part X12: Colour fastness to rubbing 4 ISO 1763, Carpets Determination of number of tufts and/or loops per unit length and per unit area 5 ISO 1766, Textile floor coverings Determination of thickness of pile above the substrate 6 ISO 1833-1, Textiles Quantitative chemical analysis Part 1: General p

37、rinciples of testing 7 ISO 1833-2, Textiles Quantitative chemical analysis Part 2: Ternary fibre mixtures 8 ISO 1833-3, Textiles Quantitative chemical analysis Part 3: Mixtures of acetate and certain other fibres (method using acetone) 9 ISO 1833-4, Textiles Quantitative chemical analysis Part 4: Mi

38、xtures of certain protein and certain other fibres (method using hypochlorite) 10 ISO 1833-5, Textiles Quantitative chemical analysis Part 5: Mixtures of viscose, cupro or modal and cotton fibres (method using sodium zincate) 11 ISO 1833-6, Textiles Quantitative chemical analysis Part 6: Mixtures of

39、 viscose or certain types of cupro or modal or lyocell and cotton fibres (method using formic acid and zinc chloride) 12 ISO 1833-7, Textiles Quantitative chemical analysis Part 7: Mixtures of polyamide and certain other fibres (method using formic acid) 13 ISO 1833-8, Textiles Quantitative chemical

40、 analysis Part 8: Mixtures of acetate and triacetate fibres (method using acetone) 14 ISO 1833-9, Textiles Quantitative chemical analysis Part 9: Mixtures of acetate and triacetate fibres (method using benzyl alcohol) 15 ISO 1833-10, Textiles Quantitative chemical analysis Part 10: Mixtures of triac

41、etate or polylactide and certain other fibres (method using dichloromethane) 16 ISO 1833-11, Textiles Quantitative chemical analysis Part 11: Mixtures of cellulose and polyester fibres (method using sulfuric acid) 17 ISO 1833-12, Textiles Quantitative chemical analysis Part 12: Mixtures of acrylic,

42、certain modacrylics, certain chlorofibres, certain elastanes and certain other fibres (method using dimethylformamide) 18 ISO 1833-13, Textiles Quantitative chemical analysis Part 13: Mixtures of certain chlorofibres and certain other fibres (method using carbon disulfide/acetone) 19 ISO 1833-14, Te

43、xtiles Quantitative chemical analysis Part 14: Mixtures of acetate and certain chlorofibres (method using acetic acid) 20 ISO 1833-15, Textiles Quantitative chemical analysis Part 15: Mixtures of jute and certain animal fibres (method by determining nitrogen content) 21 ISO 1833-16, Textiles Quantit

44、ative chemical analysis Part 16: Mixtures of polypropylene fibres and certain other fibres (method using xylene)4 ISO 2017 All rights reservedBS ISO 6347:2017ISO 6347:2017(E) 22 ISO 1833-17, Textiles Quantitative chemical analysis Part 17: Mixtures of chlorofibres (homopolymers of vinyl chloride) an

45、d certain other fibres (method using sulfuric acid) 23 ISO 1833-18, Textiles Quantitative chemical analysis Part 18: Mixtures of silk and wool or hair (method using sulfuric acid) 24 ISO 1833-19, Textiles Quantitative chemical analysis Part 19: Mixtures of cellulose fibres and asbestos (method by he

46、ating) 25 ISO 1833-20, Textiles Quantitative chemical analysis Part 20: Mixtures of elastane and certain other fibres (method using dimethylacetamide) 26 ISO 1833-21, Textiles Quantitative chemical analysis Part 21: Mixtures of chlorofibres, certain modacrylics, certain elastanes, acetates, triaceta

47、tes and certain other fibres (method using cyclohexanone) 27 ISO 1833-22, Textiles Quantitative chemical analysis Part 22: Mixtures of viscose or certain types of cupro or modal or lyocell and flax fibres (method using formic acid and zinc chloride) 28 ISO 1833-24, Textiles Quantitative chemical ana

48、lysis Part 24: Mixtures of polyester and certain other fibres (method using phenol and tetrachloroethane) 29 ISO 1833-25, Textiles Quantitative chemical analysis Part 25: Mixtures of polyester and certain other fibres (method using trichloroacetic acid and chloroform) 30 ISO 1833-26, Textiles Quanti

49、tative chemical analysis Part 26: Mixtures of melamine and cotton or aramide fibres (method using hot formic acid) 31 ISO 2424, Textile floor coverings Vocabulary 32 ISO 4919, Carpets Determination of tuft withdrawal force 33 ISO 6356, Textile and laminate floor coverings Assessment of static electrical propensity Walking test 34 I