ISO IEC 15430-1999 Information technology - Telecommunications and information exchange between systems - Private Integrated Services Network - Specification fu.pdf

《ISO IEC 15430-1999 Information technology - Telecommunications and information exchange between systems - Private Integrated Services Network - Specification fu.pdf》由会员分享，可在线阅读，更多相关《ISO IEC 15430-1999 Information technology - Telecommunications and information exchange between systems - Private Integrated Services Network - Specification fu.pdf（42页珍藏版）》请在麦多课文档分享上搜索。

1、Reference number ISO/IEC 15430:1999(E) INTERNATIONAL STANDARD ISO/IEC 15430 First edition 1999-09-01 Information technology Telecommunications and information exchange between systems Private Integrated Services Network Specification, functional model and information flows Wireless terminal call han

2、dling additional network features Technologies de linformation Tlcommunications et change dinformation entre systmes Rseau priv intgration de services Spcification, modle fonctionnel et flux dinformation Caractristiques de rseau additionnelles pour le traitement dappel de terminal sans filISO/IEC 15

3、430:1999(E) ISO/IEC 1999 All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from the publisher. ISO/IEC Copyright Office

4、Case postale 56 CH-1211 Genve 20 Switzerland Printed in Switzerland ii Contents Foreword.iv Introduction .v 1 Scope 1 2 Conformance1 3 Normative references 1 4 Terms and definitions2 4.1 External definitions.2 4.2 Other definitions .3 5 Symbols and abbreviated terms.4 6 ANF-WTMI stage 1 specificatio

5、n 4 6.1 Description 4 6.2 Procedures 5 6.3 Interaction with other supplementary services and ANFs .5 6.4 Interworking considerations7 6.5 Overall SDL7 7 ANF-WTMO stage 1 specification.9 7.1 Description 9 7.2 Procedures 9 7.3 Interaction with other supplementary services and ANFs .10 7.4 Interworking

6、 considerations12 7.5 Overall SDL12 8 ANF-WTMI stage 2 specification 13 8.1 Functional model 13 ISO/IEC ISO/IEC 15430:1999(E) iii 8.2 Information flows14 8.3 Functional entity actions .20 8.4 Functional entity behaviour.20 8.5 Allocation of functional entities to physical equipment.25 8.6 Interworki

7、ng considerations26 9 ANF-WTMO stage 2 specification 27 9.1 Functional model 27 9.2 Information flows28 9.3 Functional entity actions .31 9.4 Functional entity behaviour.32 9.5 Allocation of functional entities to physical equipment.34 9.6 Interworking considerations34ISO/IEC 15430:1999(E) ISO/IEC i

8、v Foreword ISO (the International Organization for Standardization) and IEC (the International Electrotechnical Commission) form the specialized system for worldwide standardization. National bodies that are members of ISO or IEC participate in the development of International Standards through tech

9、nical committees established by the respective organization to deal with particular fields of technical activity. ISO and IEC technical committees collaborate in fields of mutual interest. Other international organizations, governmental and non-governmental, in liaison with ISO and IEC, also take pa

10、rt in the work. International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 3. In the field of information technology, ISO and IEC have established a joint technical committee, ISO/IEC JTC 1. Draft International Standards adopted by the joint technical comm

11、ittee are circulated to national bodies for voting. Publication as an International Standard requires approval by at least 75 % of the national bodies casting a vote. International Standard ISO/IEC 15430 was prepared by Joint Technical Committee ISO/IEC JTC 1, Information technology,S ub co m mi t t

12、e eSC6,Telecommunications and information exchange between systems. ISO/IEC ISO/IEC 15430:1999(E) v Introduction This International Standard is one of a series of International Standards defining services and signalling protocols applicable to Private Integrated Services Networks (PISNs). The series

13、 uses ISDN concepts as developed by ITU-T and conforms to the framework of International Standards for Open Systems Interconnection as defined by ISO/IEC. This particular International Standard specifies the Wireless terminal call handling additional network features.INTERNATIONAL STANDARD ISO/IEC I

14、SO/IEC 15430:1999(E) 1 Information technology Telecommunications and information exchange between systems Private Integrated Services Network Specification, functional model and information flows Wireless terminal call handling additional network features 1 Scope This International Standard specifie

15、s the Wireless terminal call handling additional network features (ANF-WTMI, ANF-WTMO), which are applicable to various basic services supported by Private Integrated Services Networks (PISN). Basic services are specified in ISO/IEC 11574. Additional network feature Wireless terminal incoming call (

16、ANF-WTMI) directs incoming calls to a WTMI user within a PISN regardless of the WTMI users geographical location within the PISN, provided the WTMI users location is known. Additional network feature Wireless terminal outgoing call (ANF-WTMO) detects an outgoing call from a WTMO user and establishes

17、 it as a basic call, regardless of the users geographical location within the PISN. It also provides the WTMO users service profile for use by outgoing call control, or alternatively passes the call to the WTMO users home location for processing. Service specifications are produced in three stages,

18、according to the method described in CCITT Recommendation I.130. This International Standard contains the stage 1 and stage 2 specifications of ANF-WTMI and ANF-WTMO. The stage 1 specification (clauses 6 and 7) specifies the service as seen by users of PISNs. The stage 2 specification (clauses 8 and

19、 9) identifies the functional entities involved in the service and the information flows between them. 2 Conformance In order to conform to this International Standard, a stage 3 International Standard shall specify signalling protocols and equipment behaviour that are capable of being used in a PIS

20、N which supports the services specified in this International Standard. This means that, to claim conformance, a stage 3 International Standard is required to be adequate for the support of those aspects of clauses 6 and 7 (stage 1) and clauses 8 and 9 (stage 2) which are relevant to the interface o

21、r equipment to which the stage 3 International Standard applies. 3 Normative references The following normative documents contain provisions which, through reference in this text, constitute provisions of this International Standard. For dated references, subsequent amendments to, or revisions of, a

22、ny of these publications do not apply. However, parties to agreements based on this International Standard are encouraged to investigate the possibility of applying the most recent editions of the normative documents indicated below. For undated references, the latest edition of the normative docume

23、nt referred to applies. Members of ISO and IEC maintain registers of currently valid International Standards. ISO/IEC 11571:1994, Information technology - Telecommunications and information exchange between systems - Numbering and sub-addressing in private integrated services networks.ISO/IEC 15430:

24、1999(E) ISO/IEC 2 ISO/IEC 11574:1994, Information technology - Telecommunications and information exchange between systems - Private Integrated Services Network Circuit-mode 64 kbit/s bearer services - Service description, functional capabilities and information flows. ISO/IEC 11579-1:1994, Informat

25、ion technology - Telecommunications and information exchange between systems - Private integrated services network - Part 1: Reference configuration for PISN Exchanges (PINX). ISO/IEC 13242:1997, Information technology - Telecommunications and information exchange between systems - Private Integrate

26、d Services Network - Specification, functional model and information flows - Route Restriction Class additional network feature. ISO/IEC 13872:1995, Information technology - Telecommunications and information exchange between systems - Private Integrated Services Network - Specification, functional

27、model and information flows - Call diversion supplementary services. ISO/IEC 15055:1997, Information technology - Telecommunications and information exchange between systems - Private Integrated Services Network - Specification, functional model and information flows - Transit counter additional net

28、work feature. ISO/IEC 15428:1999, Information technology - Telecommunications and information exchange between systems - Private Integrated Services Network - Specification, functional model and information flows - Wireless Terminal Location Registration supplementary service and Wireless Terminal I

29、nformation Exchange additional network feature. ISO/IEC 15432:1999, Information technology - Telecommunications and information exchange between systems - Private Integrated Services Network - Specification, functional model and information flows - Wireless Terminal Authentication supplementary serv

30、ices (WTAT and WTAN). ITU-T Rec. I.112:1993, Vocabulary of terms for ISDNs. CCITT Rec. I.130:1988, Method for the characterization of telecommunication services supported by an ISDN and network capabilities of an ISDN (Blue Book). ITU-T Rec. I.210:1993, Principles of telecommunication services suppo

31、rted by an ISDN and the means to describe them. ITU-T Rec. Z.100:1993, Specification and Description Language. 4 Terms and definitions For the purposes of this International Standard, the following definitions apply. 4.1 External definitions This International Standard uses the following terms defin

32、ed in other documents: Address (ISO/IEC 11571) Additional network feature (ANF) (ISO/IEC 15428) Basic service (ITU-T Rec. I.210) Call, basic call (ISO/IEC 11574) Complete (PISN) number (ISO/IEC 11571) Fixed part (FP) (ISO/IEC 15428) Home data base (HDB) (ISO/IEC 15428) Home PINX (ISO/IEC 15428) Numb

33、er, PISN number (ISO/IEC 11571) ISO/IEC ISO/IEC 15430:1999(E) 3 Partial (PISN) number (ISO/IEC 11571) Private Integrated Services Network (PISN) (ISO/IEC 11579-1) Private Integrated Services Network Exchange (PINX) (ISO/IEC 11579-1) Route access class (RAC) (ISO/IEC 13242) Service (ITU-T Rec. I.112)

34、 Service profile (ISO/IEC 15428) Signalling (ITU-T Rec. I.112) Supplementary Service (ITU-T Rec. I.210) User (ISO/IEC 11574) Visitor data base (VDB) (ISO/IEC 15428) Visitor PINX (ISO/IEC 15428) Wireless Terminal Mobility (WTM) (ISO/IEC 15428) This International Standard refers to the following basic

35、 call functional entities (FEs) defined in ISO/IEC 11574: Call Control (CC) Call Control Agent (CCA) This International Standard refers to the following basic call inter-FE relationships defined in ISO/IEC 11574: r1 r2 r3 This International Standard refers to the following basic call information flo

36、ws defined in ISO/IEC 11574: RELEASE request/indication SETUP request/indication SETUP response/confirmation SETUP REJECT request/indication This International Standard refers to the following basic call information flow service elements defined in ISO/IEC 11574: Call History Connection Type Destina

37、tion Number Destination Subaddress Originating Number Originating Subaddress 4.2 Other definitions 4.2.1 WTM call: A call which is processed by ANF-WTMI or ANF-WTMO.ISO/IEC 15430:1999(E) ISO/IEC 4 4.2.2 WTMI user: A user whose incoming calls are processed by ANF-WTMI. 4.2.3 WTMO user: A user whose o

38、utgoing calls are processed by ANF-WTMO. 4.2.4 Incoming WTM call: A call whose called user is a WTMI user. 4.2.5 Outgoing WTM call: A call whose calling user is a WTMO user. 5 Symbols and abbreviated terms ANF Additional Network feature ANF-WTMI ANF Wireless TerMinal Incoming call ANF-WTMO ANF Wirel

39、ess TerMinal Outgoing call CC Call Control (functional entity) CCA Call Control Agent (functional entity) FE Functional Entity FP Fixed Part HDB Home Data Base ISDN Integrated Services Digital Network PINX Private Integrated Services Network Exchange PISN Private Integrated Services Network RAC Rout

40、e Access Class SDL Specification and Description Language SS Supplementary Service VDB Visitor Data Base WTM Wireless Terminal Mobility 6 ANF-WTMI stage 1 specification 6.1 Description 6.1.1 General description ANF-WTMI enables calls to be directed to a WTMI user within the PISN. As there is no pred

41、etermined access for the connection of a WTMI user to the PISN, the directing of such calls requires that information regarding the location of the WTMI user is available. 6.1.2 Qualifications on applicability to telecommunication services ANF-WTMI is applicable to all basic services defined in ISO/

42、IEC 11574. ISO/IEC ISO/IEC 15430:1999(E) 5 6.2 Procedures 6.2.1 Provision/withdrawal Not applicable 6.2.2 Normal procedures 6.2.2.1 Activation/deactivation/registration/interrogation ANF-WTMI shall be permanently activated. Registration and interrogation are not applicable to this ANF. 6.2.2.2 Invoc

43、ation and operation For each WTMI user, information shall be maintained relating to the location of the WTMI user within the PISN. ANF-WTMI shall be invoked for an incoming call when analysis of the destination number indicates that the called user is a WTMI user. Once invoked, ANF-WTMI shall route

44、the call to the WTMI user using the destination number to determine the address of the PISN access currently in use by the WTMI user. Further processing of the call shall follow normal basic call procedures. 6.2.3 Exceptional procedures 6.2.3.1 Activation/deactivation/registration/interrogation Not

45、applicable 6.2.3.2 Invocation and operation If the PISN is unable to complete an incoming call to a WTMI user, an indication that the call was unsuccessful shall be sent to the calling user. Normal basic call failure procedures shall be used. 6.3 Interaction with other supplementary services and ANF

46、s Interactions with other supplementary services and ANFs for which PISN International Standards were available at the time of publication of this International Standard are specified below. 6.3.1 Calling Line Identification Presentation (SS-CLIP) No interaction 6.3.2 Connected Line Identification P

47、resentation (SS-COLP) No interaction 6.3.3 Calling/Connected Line Identification Restriction (SS-CLIR) No interaction 6.3.4 Calling Name Identification Presentation (SS-CNIP) No interaction 6.3.5 Connected Name Identification Presentation (SS-CONP) No interactionISO/IEC 15430:1999(E) ISO/IEC 6 6.3.6

48、 Calling/Connected Name Identification Restriction (SS-CNIR) No interaction 6.3.6 Call Completion to Busy Subscriber (SS-CCBS) No interaction 6.3.7 Call Completion on No Reply (SS-CCNR) No interaction 6.3.8 Call Transfer (SS-CT) No interaction 6.3.9 Call Forwarding Unconditional (SS-CFU) If SS-CFU h

49、as been activated, the invocation of SS-CFU shall take precedence over the directing of calls by means of ANF-WTMI. 6.3.10 Call Forwarding Busy (SS-CFB) No interaction NOTE SS-CFB may not be available to the WTMI user. 6.3.11 Call Forwarding No Reply (SS-CFNR) No interaction NOTE SS-CFNR may not be available to the WTMI user. 6.3.12 Call Deflection (SS-CD) No interaction 6.3.13 Path Replacement (ANF-PR) No interaction 6.3.14 Call Offer (SS-CO) No intera