IEEE C57 157-2015 en Guide for Conducting Functional Life Tests on Switch Contacts Used in Insulating Liquid CImmersed Transformers.pdf

《IEEE C57 157-2015 en Guide for Conducting Functional Life Tests on Switch Contacts Used in Insulating Liquid CImmersed Transformers.pdf》由会员分享，可在线阅读，更多相关《IEEE C57 157-2015 en Guide for Conducting Functional Life Tests on Switch Contacts Used in Insulating Liquid CImmersed Transformers.pdf（26页珍藏版）》请在麦多课文档分享上搜索。

1、 IEEE Guide for Conducting Functional Life Tests on Switch Contacts Used in Insulating Liquid-Immersed Transformers Sponsored by the Transformers Committee IEEE 3 Park Avenue New York, NY 10016-5997 USA IEEE Power and Energy Society IEEE Std C57.157-2015IEEE Std C57.157-2015 IEEE Guide for Conductin

2、g Functional Life Tests on Switch Contacts Used in Insulating LiquidImmersed Transformers Sponsor Transformers Committee of the IEEE Power and Energy Society Approved 26 October 2015 IEEE-SA Standards Board Abstract: This guide is intended for use in establishing a methodology to evaluate expected l

3、ong-term performance of infrequently operated switch contacts used within insulating liquidimmersed transformers. These switch contacts are typically found in de-energized tapchangers, dual voltage switches, reversing switches, on-load tapchangers, and step-voltage regulators, but the test might pos

4、sibly be used to evaluate any contact that is used in insulating liquids with similar operating characteristics and within similar environments. Keywords: accelerated life simulation, Arrhenius relationship, contact aging phenomenon, IEEE C57.157, supertemperature The Institute of Electrical and Ele

5、ctronics Engineers, Inc. 3 Park Avenue, New York, NY 10016-5997, USA Copyright 2015 by The Institute of Electrical and Electronics Engineers, Inc. All rights reserved. Published 20 November 2015. Printed in the United States of America. IEEE is a registered trademark in the U.S. Patent fitness for a

6、 particular purpose; non-infringement; and quality, accuracy, effectiveness, currency, or completeness of material. In addition, IEEE disclaims any and all conditions relating to: results; and workmanlike effort. IEEE standards documents are supplied “AS IS” and “WITH ALL FAULTS.” Use of an IEEE sta

7、ndard is wholly voluntary. The existence of an IEEE standard does not imply that there are no other ways to produce, test, measure, purchase, market, or provide other goods and services related to the scope of the IEEE standard. Furthermore, the viewpoint expressed at the time a standard is approved

8、 and issued is subject to change brought about through developments in the state of the art and comments received from users of the standard. In publishing and making its standards available, IEEE is not suggesting or rendering professional or other services for, or on behalf of, any person or entit

9、y nor is IEEE undertaking to perform any duty owed by any other person or entity to another. Any person utilizing any IEEE Standards document, should rely upon his or her own independent judgment in the exercise of reasonable care in any given circumstances or, as appropriate, seek the advice of a c

10、ompetent professional in determining the appropriateness of a given IEEE standard. IN NO EVENT SHALL IEEE BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO: PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PR

11、OFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE PUBLICATION, USE OF, OR RELIANCE UPON ANY STANDARD, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE AND R

12、EGARDLESS OF WHETHER SUCH DAMAGE WAS FORESEEABLE. Translations The IEEE consensus development process involves the review of documents in English only. In the event that an IEEE standard is translated, only the English version published by IEEE should be considered the approved IEEE standard. Offici

13、al statements A statement, written or oral, that is not processed in accordance with the IEEE-SA Standards Board Operations Manual shall not be considered or inferred to be the official position of IEEE or any of its committees and shall not be considered to be, or be relied upon as, a formal positi

14、on of IEEE. At lectures, symposia, seminars, or educational courses, an individual presenting information on IEEE standards shall make it clear that his or her views should be considered the personal views of that individual rather than the formal position of IEEE. Comments on standards Comments for

15、 revision of IEEE Standards documents are welcome from any interested party, regardless of membership affiliation with IEEE. However, IEEE does not provide consulting information or advice pertaining to IEEE Standards documents. Suggestions for changes in documents should be in the form of a propose

16、d change of text, together with appropriate supporting comments. Since IEEE standards represent a consensus of concerned interests, it is important that any responses to comments and questions also receive the concurrence of a balance of interests. For this reason, IEEE and the members of its societ

17、ies and Standards Coordinating Committees are not able to provide an instant response to comments or questions except in those cases where the matter has previously been addressed. For the same reason, IEEE does not respond to interpretation requests. Any person who would like to participate in revi

18、sions to an IEEE standard is welcome to join the relevant IEEE working group. Comments on standards should be submitted to the following address: Secretary, IEEE-SA Standards Board 445 Hoes Lane Piscataway, NJ 08854 USA Laws and regulations Users of IEEE Standards documents should consult all applic

19、able laws and regulations. Compliance with the provisions of any IEEE Standards document does not imply compliance to any applicable regulatory requirements. Implementers of the standard are responsible for observing or referring to the applicable regulatory requirements. IEEE does not, by the publi

20、cation of its standards, intend to urge action that is not in compliance with applicable laws, and these documents may not be construed as doing so. Copyrights IEEE draft and approved standards are copyrighted by IEEE under U.S. and international copyright laws. They are made available by IEEE and a

21、re adopted for a wide variety of both public and private uses. These include both use, by reference, in laws and regulations, and use in private self-regulation, standardization, and the promotion of engineering practices and methods. By making these documents available for use and adoption by publi

22、c authorities and private users, IEEE does not waive any rights in copyright to the documents. Photocopies Subject to payment of the appropriate fee, IEEE will grant users a limited, non-exclusive license to photocopy portions of any individual standard for company or organizational internal use or

23、individual, non-commercial use only. To arrange for payment of licensing fees, please contact Copyright Clearance Center, Customer Service, 222 Rosewood Drive, Danvers, MA 01923 USA; +1 978 750 8400. Permission to photocopy portions of any individual standard for educational classroom use can also b

24、e obtained through the Copyright Clearance Center. Updating of IEEE Standards documents Users of IEEE Standards documents should be aware that these documents may be superseded at any time by the issuance of new editions or may be amended from time to time through the issuance of amendments, corrige

25、nda, or errata. An official IEEE document at any point in time consists of the current edition of the document together with any amendments, corrigenda, or errata then in effect. Every IEEE standard is subjected to review at least every ten years. When a document is more than ten years old and has n

26、ot undergone a revision process, it is reasonable to conclude that its contents, although still of some value, do not wholly reflect the present state of the art. Users are cautioned to check to determine that they have the latest edition of any IEEE standard. In order to determine whether a given d

27、ocument is the current edition and whether it has been amended through the issuance of amendments, corrigenda, or errata, visit the IEEE-SA Website at http:/ieeexplore.ieee.org/xpl/standards.jsp or contact IEEE at the address listed previously. For more information about the IEEE SA or IEEEs standar

28、ds development process, visit the IEEE-SA Website at http:/standards.ieee.org. Errata Errata, if any, for all IEEE standards can be accessed on the IEEE-SA Website at the following URL: http:/standards.ieee.org/findstds/errata/index.html. Users are encouraged to check this URL for errata periodicall

29、y. Patents Attention is called to the possibility that implementation of this standard may require use of subject matter covered by patent rights. By publication of this standard, no position is taken by the IEEE with respect to the existence or validity of any patent rights in connection therewith.

30、 If a patent holder or patent applicant has filed a statement of assurance via an Accepted Letter of Assurance, then the statement is listed on the IEEE-SA Website at http:/standards.ieee.org/about/sasb/patcom/patents.html. Letters of Assurance may indicate whether the Submitter is willing or unwill

31、ing to grant licenses under patent rights without compensation or under reasonable rates, with reasonable terms and conditions that are demonstrably free of any unfair discrimination to applicants desiring to obtain such licenses. Essential Patent Claims may exist for which a Letter of Assurance has

32、 not been received. The IEEE is not responsible for identifying Essential Patent Claims for which a license may be required, for conducting inquiries into the legal validity or scope of Patents Claims, or determining whether any licensing terms or conditions provided in connection with submission of

33、 a Letter of Assurance, if any, or in any licensing agreements are reasonable or non-discriminatory. Users of this standard are expressly advised that determination of the validity of any patent rights, and the risk of infringement of such rights, is entirely their own responsibility. Further inform

34、ation may be obtained from the IEEE Standards Association. Copyright 2015 IEEE. All rights reserved. vi Participants At the time this IEEE guide was completed, the Functional Life Tests on Switch Contacts PC57.157 Working Group had the following membership: Philip Hopkinson, Chair Adam Sewell, Vice

35、Chair/Secretary James Campbell Craig Colopy Larry Dix Dieter Dohnal Eduardo Garcia Jeffrey Golarz Jose Izquierdo Marion Jaroszewski John K. John Axel Kraemer Bernhard Kurth Charles Patrick McShane Shawn Nunn Amitabh Sarkar Daniel Sauer Jeremy Sewell Hemchandra Shertukde Mahendrakumar Soni Bengt-Olof

36、 Stenestam Joe Watson Baitun YangThe following members of the individual balloting committee voted on this guide. Balloters may have voted for approval, disapproval, or abstention. Jim Antweiler Roberto Asano Donald Ayers Barry Beaster Wallace Binder William Bloethe William Boettger Paul Cardinal Cr

37、aig Colopy John Crouse Willaim Darovny Dieter Dohnal Gary Donner Randall Dotson Marcel Fortin Fredric Friend David Gilmer William Griesacker Randall Groves Jeffrey Helzer Philip Hopkinson Richard Jackson Laszlo Kadar Sheldon Kennedy Yuri Khersonsky Axel Kraemer Jim Kulchisky Chung-Yiu Lam Richard Ma

38、rek J. Dennis Marlow Lee Matthews Charles Patrick McShane Daniel Mulkey Jerry Murphy Ryan Musgrove K. R. M. Nair Kris K. Neild Joe Nims Bansi Patel Branimir Petosic Donald Platts Alvaro Portillo Lewis Powell Iulian Profir Jean-Christophe Riboud Michael Roberts Thomas Rozek Daniel Sauer Bartien Sayog

39、o Stephen Schroeder Ewald Schweiger Adam Sewell Jeremy Sewell Hyeong Sim Jeremy Smith Jerry Smith David Tepen Juan Thierry Roger Verdolin John Vergis Jane Verner Joe Watson Kipp Yule Copyright 2015 IEEE. All rights reserved. vii When the IEEE-SA Standards Board approved this guide on 26 October 2015

40、, it had the following membership: John D. Kulick, Chair Jon Walter Rosdahl, Vice Chair Richard H. Hulett, Past Chair Konstantinos Karachalios, Secretary Masayuki Ariyoshi Ted Burse Stephen Dukes Jean-Philippe Faure J. Travis Griffith Gary Hoffman Michael Janezic Joseph L. Koepfinger* David J. Law H

41、ung Ling Andrew Myles T. W. Olsen Glenn Parsons Ronald C. Petersen Annette D. Reilly Stephen J. Shellhammer Adrian P. Stephens Yatin Trivedi Philip Winston Don Wright Yu Yuan Daidi Zhong *Member Emeritus Copyright 2015 IEEE. All rights reserved. viii Introduction This introduction is not part of IEE

42、E Std C57.157-2015, IEEE Guide for Conducting Functional Life Tests on Switch Contacts Used in Insulating LiquidImmersed Transformers. This guide outlines a test method to simulate long-term life (minimum 30 years) of a de-energized tapchanger in a period of 30 test days by using a combination of el

43、evated liquid temperatures in conjunction with cyclically elevated load currents. The test is performed on specific switch bodies with specific contact materials, geometries, contact pressures in liquid baths so as to closely parallel conditions found in actual operation. The variable that provides

44、the accelerated life simulation is the switch contact temperatures. See Annex B for more background information. Copyright 2015 IEEE. All rights reserved. ix Contents 1. Overview 1 1.1 Scope . 1 1.2 Purpose 1 2. Normative references 2 3. Definitions 2 4. Background 2 4.1 Basis of 10 C rule and appli

45、cation of Arrhenius relationship. 3 4.2 Incorporation in test of IEEE transformer loading guide . 3 4.3 Incorporation in test of typical daily load cycle . 3 4.4 Derivation of desired aging temperatures 4 4.5 Application of specific switch characteristics to test . 5 5. General test setup . 5 5.1 Sa

46、fety considerations . 5 5.2 Items for test 5 5.3 Monitoring locations 6 6. Test procedure 9 7. Test data recording . 9 8. Pass/fail criteria .10 Annex A (informative) Bibliography 11 Annex B (informative) Contact aging phenomenon in insulating liquid .12 Copyright 2015 IEEE. All rights reserved. 1 I

47、EEE Guide for Conducting Functional Life Tests on Switch Contacts Used in Insulating LiquidImmersed Transformers IMPORTANT NOTICE: IEEE Standards documents are not intended to ensure safety, security, health, or environmental protection, or ensure against interference with or from other devices or n

48、etworks. Implementers of IEEE Standards documents are responsible for determining and complying with all appropriate safety, security, environmental, health, and interference protection practices and all applicable laws and regulations. This IEEE document is made available for use subject to importa

49、nt notices and legal disclaimers. These notices and disclaimers appear in all publications containing this document and may be found under the heading “Important Notice” or “Important Notices and Disclaimers Concerning IEEE Documents.” They can also be obtained on request from IEEE or viewed at http:/standards.ieee.org/IPR/disclaimers.html. 1. Overview 1.1 Scope This guide is intended for use in establishing a methodology to evaluate expected long-term performance of infrequently operated switch contacts used within insulating liquidimmersed transformers. These s