IEEE C57 153-2015 en IEEE Guide for Paralleling Regulating Transforme《并联调节变压器IEEE指南》.pdf

《IEEE C57 153-2015 en IEEE Guide for Paralleling Regulating Transforme《并联调节变压器IEEE指南》.pdf》由会员分享，可在线阅读，更多相关《IEEE C57 153-2015 en IEEE Guide for Paralleling Regulating Transforme《并联调节变压器IEEE指南》.pdf（107页珍藏版）》请在麦多课文档分享上搜索。

1、 IEEE Guide for Paralleling Regulating Transformers Sponsored by the Transformers Committee IEEE 3 Park Avenue New York, NY 10016-5997 USA IEEE Power and Energy Society IEEE Std C57.153-2015 IEEE Std C57.153-2015 IEEE Guide for Paralleling Regulating Transformers Sponsor Transformers Committee of th

2、e IEEE Power and Energy Society Approved 26 March 2015 IEEE-SA Standards Board Abstract: Control methods of paralleling regulating transformers are described and compared in this guide. The control methods include: master/follower, circulating current, power factor, circulating reactive current and

3、negative reactance methods. Operating philosophy descriptions, sample wiring diagrams, typical operational variations, the provision of adequate backup protection, and typical misapplication consequences are presented. This guide does not apply to phase-shifting regulating transformers. Keywords: ba

4、ckup protection, circulating current method, circulating reactive current method, IEEE C57.153, line current compensation, line drop compensation, master/follower method, negative reactance method, power factor method, tap changer control, transformer loading, transformer paralleling, voltage contro

5、l The Institute of Electrical and Electronics Engineers, Inc. 3 Park Avenue, New York, NY 10016-5997, USA Copyright 2015 by The Institute of Electrical and Electronics Engineers, Inc. All rights reserved. Published 30 April 2015. Printed in the United States of America. IEEE is a registered trademar

6、k in the U.S. Patent fitness for a particular purpose; non-infringement; and quality, accuracy, effectiveness, currency, or completeness of material. In addition, IEEE disclaims any and all conditions relating to: results; and workmanlike effort. IEEE standards documents are supplied “AS IS” and “WI

7、TH ALL FAULTS.” Use of an IEEE standard is wholly voluntary. The existence of an IEEE standard does not imply that there are no other ways to produce, test, measure, purchase, market, or provide other goods and services related to the scope of the IEEE standard. Furthermore, the viewpoint expressed

8、at the time a standard is approved and issued is subject to change brought about through developments in the state of the art and comments received from users of the standard. In publishing and making its standards available, IEEE is not suggesting or rendering professional or other services for, or

9、 on behalf of, any person or entity nor is IEEE undertaking to perform any duty owed by any other person or entity to another. Any person utilizing any IEEE Standards document, should rely upon his or her own independent judgment in the exercise of reasonable care in any given circumstances or, as a

10、ppropriate, seek the advice of a competent professional in determining the appropriateness of a given IEEE standard. IN NO EVENT SHALL IEEE BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO: PROCUREMENT OF SUBSTITUTE GOODS OR

11、SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE PUBLICATION, USE OF, OR RELIANCE UPON ANY STANDARD, EVEN IF ADVISED OF TH

12、E POSSIBILITY OF SUCH DAMAGE AND REGARDLESS OF WHETHER SUCH DAMAGE WAS FORESEEABLE. Translations The IEEE consensus development process involves the review of documents in English only. In the event that an IEEE standard is translated, only the English version published by IEEE should be considered

13、the approved IEEE standard. Official statements A statement, written or oral, that is not processed in accordance with the IEEE-SA Standards Board Operations Manual shall not be considered or inferred to be the official position of IEEE or any of its committees and shall not be considered to be, or

14、be relied upon as, a formal position of IEEE. At lectures, symposia, seminars, or educational courses, an individual presenting information on IEEE standards shall make it clear that his or her views should be considered the personal views of that individual rather than the formal position of IEEE.

15、Comments on standards Comments for revision of IEEE Standards documents are welcome from any interested party, regardless of membership affiliation with IEEE. However, IEEE does not provide consulting information or advice pertaining to IEEE Standards documents. Suggestions for changes in documents

16、should be in the form of a proposed change of text, together with appropriate supporting comments. Since IEEE standards represent a consensus of concerned interests, it is important that any responses to comments and questions also receive the concurrence of a balance of interests. For this reason,

17、IEEE and the members of its societies and Standards Coordinating Committees are not able to provide an instant response to comments or questions except in those cases where the matter has previously been addressed. For the same reason, IEEE does not respond to interpretation requests. Any person who

18、 would like to participate in revisions to an IEEE standard is welcome to join the relevant IEEE working group. Comments on standards should be submitted to the following address: Secretary, IEEE-SA Standards Board 445 Hoes Lane Piscataway, NJ 08854 USA Laws and regulations Users of IEEE Standards d

19、ocuments should consult all applicable laws and regulations. Compliance with the provisions of any IEEE Standards document does not imply compliance to any applicable regulatory requirements. Implementers of the standard are responsible for observing or referring to the applicable regulatory require

20、ments. IEEE does not, by the publication of its standards, intend to urge action that is not in compliance with applicable laws, and these documents may not be construed as doing so. Copyrights IEEE draft and approved standards are copyrighted by IEEE under U.S. and international copyright laws. The

21、y are made available by IEEE and are adopted for a wide variety of both public and private uses. These include both use, by reference, in laws and regulations, and use in private self-regulation, standardization, and the promotion of engineering practices and methods. By making these documents avail

22、able for use and adoption by public authorities and private users, IEEE does not waive any rights in copyright to the documents. Photocopies Subject to payment of the appropriate fee, IEEE will grant users a limited, non-exclusive license to photocopy portions of any individual standard for company

23、or organizational internal use or individual, non-commercial use only. To arrange for payment of licensing fees, please contact Copyright Clearance Center, Customer Service, 222 Rosewood Drive, Danvers, MA 01923 USA; +1 978 750 8400. Permission to photocopy portions of any individual standard for ed

24、ucational classroom use can also be obtained through the Copyright Clearance Center. Updating of IEEE Standards documents Users of IEEE Standards documents should be aware that these documents may be superseded at any time by the issuance of new editions or may be amended from time to time through t

25、he issuance of amendments, corrigenda, or errata. An official IEEE document at any point in time consists of the current edition of the document together with any amendments, corrigenda, or errata then in effect. Every IEEE standard is subjected to review at least every ten years. When a document is

26、 more than ten years old and has not undergone a revision process, it is reasonable to conclude that its contents, although still of some value, do not wholly reflect the present state of the art. Users are cautioned to check to determine that they have the latest edition of any IEEE standard. In or

27、der to determine whether a given document is the current edition and whether it has been amended through the issuance of amendments, corrigenda, or errata, visit the IEEE-SA Website at http:/ieeexplore.ieee.org/xpl/standards.jsp or contact IEEE at the address listed previously. For more information

28、about the IEEE SA or IEEEs standards development process, visit the IEEE-SA Website at http:/standards.ieee.org. Errata Errata, if any, for all IEEE standards can be accessed on the IEEE-SA Website at the following URL: http:/standards.ieee.org/findstds/errata/index.html. Users are encouraged to che

29、ck this URL for errata periodically. Patents Attention is called to the possibility that implementation of this standard may require use of subject matter covered by patent rights. By publication of this standard, no position is taken by the IEEE with respect to the existence or validity of any pate

30、nt rights in connection therewith. If a patent holder or patent applicant has filed a statement of assurance via an Accepted Letter of Assurance, then the statement is listed on the IEEE-SA Website at http:/standards.ieee.org/about/sasb/patcom/patents.html. Letters of Assurance may indicate whether

31、the Submitter is willing or unwilling to grant licenses under patent rights without compensation or under reasonable rates, with reasonable terms and conditions that are demonstrably free of any unfair discrimination to applicants desiring to obtain such licenses. Essential Patent Claims may exist f

32、or which a Letter of Assurance has not been received. The IEEE is not responsible for identifying Essential Patent Claims for which a license may be required, for conducting inquiries into the legal validity or scope of Patents Claims, or determining whether any licensing terms or conditions provide

33、d in connection with submission of a Letter of Assurance, if any, or in any licensing agreements are reasonable or non-discriminatory. Users of this standard are expressly advised that determination of the validity of any patent rights, and the risk of infringement of such rights, is entirely their

34、own responsibility. Further information may be obtained from the IEEE Standards Association. Participants At the time this IEEE guide was completed, the Paralleling Guide Working Group had the following membership: E. Tom Jauch, Chair James Graham, Vice Chair Mark Tostrud, Secretary Stephen Anthony

35、Carlo Arpino Ralph Averitt Daniel Blaydon William Boettger Craig Colopy James H. Harlow David Harris Gary Hoffman Dallas Jacobsen Rowland James, Jr. Derek Johnson Jinho Kang Axel Kraemer Marnie Roussell Daniel Sauer Ewald Schweiger Hemchandra Shertukde William Solano Sanjib Som Markus Stank Peter St

36、ewart Joshua Trimble Kiran Vedante Karsten Viereck Krishnamurthy Vijayan Joe Watson Samuel Young Murty V. V. Yalla Jennifer Yu The following members of the individual balloting committee voted on this guide. Balloters may have voted for approval, disapproval, or abstention. William Ackerman Samuel A

37、guirre Ali Al Awazi Stephen Antosz Carlo Arpino Roberto Asano Donald Ayers Peter Balma Thomas Barnes George Bartok Barry Beaster Philip Beaumont Robert Beavers Thomas Beckwith W. J. (Bill) Bergman Steven Bezner Wallace Binder Thomas Blackburn Daniel Blaydon William Bloethe William Boettger Paul Boma

38、n Derek Brown Gustavo Brunello Carl Bush William Byrd Thomas Callsen Paul Cardinal Arvind Chaudhary Kurt Clemente Craig Colopy Luis Coronado Randall Crellin John Crouse Randall Cunico Glenn Davis Dieter Dohnal Kevin Donahoe Gary Donner Randall Dotson Dana Dufield Fred Elliott Jorge Fernandez Daher J

39、oseph Foldi Marcel Fortin Doaa Galal Mel George, V Frank Gerleve Ali Ghafourian Jalal Gohari Edwin Goodwin James Graham Stephen Grier Randall Groves Ajit Gwal James H. Harlow David Harris Roger Hayes Jeffrey Helzer Reid Herzog Gary Heuston Werner Hoelzl Robert Hoerauf Gary Hoffman Philip Hopkinson R

40、elu Ilie Mohammad Iman Dallas Jacobsen Rowland James, Jr. E. Tom Jauch John John Laszlo Kadar John Kay Gael Kennedy Sheldon Kennedy Yuri Khersonsky James Kinney Gary Kobet Boris Kogan Edwin Kramer David Krause Jim Kulchisky Paneendra Kumar B. L. Saumen Kundu John Lackey Chung-Yiu Lam Thomas La Rose

41、Raluca Lascu Albert Livshitz Thomas Lundquist Bruce Mackie J. Dennis Marlow Lee Matthews Omar Mazzoni John Mcalhaney, Jr Mark McNally John Miller Sujeet Mishra Daleep Mohla Copyright 2015 IEEE. All rights reserved. vi Joe Mooney Ryan Musgrove K. R. M. Nair Kris K. Neild Dennis Neitzel Arthur Neubaue

42、r Michael Newman Raymond Nicholas Joe Nims Lorraine Padden Mirko Palazzo Bansi Patel Shawn Patterson Brian Penny Christopher Petrola Tony Pink Alvaro Portillo Iulian Profir Robert Resuali Jean-Christophe Riboud Michael Roberts Charles Rogers Oleg Roizman John Rossetti Thomas Rozek Steven Sano Daniel

43、 Sauer Bartien Sayogo Dennis Schlender Robert Schuerger Ewald Schweiger Robert Seitz Nikunj Shah Hemchandra Shertukde Charles Simmons Jerry Smith Gary Smullin John Spare Peter Stewart K. B. Stump David Tepen Malcolm Thaden Michael Thompson Mark Tostrud Demetrios Tziouvaras Joe Uchiyama Eric Udren Jo

44、hn Vergis Jane Verner John Wang Daniel Ward Diane Watkins Yingli Wen Kenneth White Philip Winston Murty V. V. Yalla Ray Young Jennifer Yu Jian Yu Kipp Yule Luis Zambrano When the IEEE-SA Standards Board approved this guide on 26 March 2015, it had the following membership: John Kulick, Chair Jon Wal

45、ter Rosdahl, Vice Chair Richard H. Hulett, Past Chair Konstantinos Karachalios, Secretary Masayuki Ariyoshi Ted Burse Stephen Dukes Jean-Philippe Faure J. Travis Griffith Gary Hoffman Michael Janezic Joseph L. Koepfinger* David J. Law Hung Ling Andrew Myles T. W. Olsen Glenn Parsons Ronald C. Peters

46、en Annette D. Reilly Stephen J. Shellhammer Adrian P. Stephens Yatin Trivedi Phillip Winston Don Wright Yu Yuan Daidi Zhong *Member Emeritus Don Messina IEEE-SA Content Production and Management Erin Spiewak IEEE-SA Operational Program Management Copyright 2015 IEEE. All rights reserved. vii Introdu

47、ction This introduction is not part of IEEE Std C57.153-2015, IEEE Guide for Paralleling Regulating Transformers. This guide was prepared by the C57.153 Working Group of the Power Transformers Subcommittee of the Transformers Committee of the IEEE Power and Energy Society. The intent of this new gui

48、de is to present information for the selection and application of transformer paralleling methods used to maintain power system operations. This guide describes paralleling methods in common practice at the time this guide was written and provides information concerning the operational requirements

49、and limitations of each method. Additional information is provided for cases of paralleling transformers with unequal ratings and other operational conditions requiring special considerations. Copyright 2015 IEEE. All rights reserved. viii Contents 1. Overview 1 1.1 Scope . 1 1.2 Purpose 1 2. Normative references 1 3. Definitions, acronyms, and abbreviations 2 3.1 Definitions . 2 3.2 Acronyms and abbreviations . 3 4. Basic paralleling information . 3 4.1 General application 3 4.2 Reasons for paralleled transformer operation 6 4.3 Basic voltage-control operation . 6 4.4 Effects