IEEE 1662-2016 en Recommended Practice for the Design and Application of Power Electronics in Electrical Power Systems.pdf

《IEEE 1662-2016 en Recommended Practice for the Design and Application of Power Electronics in Electrical Power Systems.pdf》由会员分享，可在线阅读，更多相关《IEEE 1662-2016 en Recommended Practice for the Design and Application of Power Electronics in Electrical Power Systems.pdf（68页珍藏版）》请在麦多课文档分享上搜索。

1、IEEE Recommended Practice for the Design and Application of Power Electronics in Electrical Power SystemsIEEE Std 1662-2016(Revision of IEEE Std 1662-2008)IEEE Industry Applications SocietySponsored by the Petroleum and Chemical Industry Committee and the IEEE Power Electronics SocietySponsored by t

2、he Standards CommitteeIEEE3 Park AvenueNew York, NY 10016-5997USAIEEE Std 1662-2016(Revision ofIEEE Std 1662-2008)IEEE Recommended Practice for the Design and Application of Power Electronics in Electrical Power SystemsSponsorsPetroleum and Chemical Industry Committeeof theIEEE Industry Applications

3、 SocietyStandards Committeeof theIEEE Power Electronics SocietyApproved 22 September 2016IEEE-SA Standards BoardAbstract: Recommendations and requirements for the design and applications of power elec-tronics in land-based (onshore) and marine (offshore) electrical power systems are provided in this

4、 standard. A wide range of power electronics equipment with aggregated power ratings at and above 100 kW with voltages equal or less than 52 kV (ac) or (dc) is covered. Existing engineering practices, analytical methods, and performance characteristics are described. Applicable interna-tional and lo

5、cal standards are referenced with appropriate guidance to provide users of the stan-dard with correct criteria for design, testing, and maintenance necessary for reliable operation of integrated power systems.Keywords: IEEE 1662, integrated power systems, PEBB, power electronic building blocks, powe

6、r electronicsThe Institute of Electrical and Electronics Engineers, Inc.3 Park Avenue, New York, NY 10016-5997, USACopyright 2017 by The Institute of Electrical and Electronics Engineers, Inc. All rights reserved. Published 9 March 2017. Printed in the United States of America.IEEE is a registered t

7、rademark in the U.S. Patent fitness for a particular purpose; non-infringement; and quality, accuracy, effectiveness, currency, or completeness of material. In addition, IEEE disclaims any and all conditions relating to: results; and workmanlike effort. IEEE standards documents are supplied “AS IS”

8、and “WITH ALL FAULTS.”Use of an IEEE standard is wholly voluntary. The existence of an IEEE standard does not imply that there are no other ways to produce, test, measure, purchase, market, or provide other goods and services related to the scope of the IEEE standard. Furthermore, the viewpoint expr

9、essed at the time a standard is approved and issued is subject to change brought about through developments in the state of the art and comments received from users of the standard.In publishing and making its standards available, IEEE is not suggesting or rendering professional or other services fo

10、r, or on behalf of, any person or entity nor is IEEE undertaking to perform any duty owed by any other person or entity to another. Any person utilizing any IEEE Standards document, should rely upon his or her own independent judgment in the exercise of reasonable care in any given circumstances or,

11、 as appropri-ate, seek the advice of a competent professional in determining the appropriateness of a given IEEE standard.IN NO EVENT SHALL IEEE BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO: PROCURE-MENT OF SUBSTITUTE GOO

12、DS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CON-TRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE PUBLICATION, USE OF, OR RELIANCE UPON ANY STANDARD, EVEN IF ADVISE

13、D OF THE POSSIBILITY OF SUCH DAMAGE AND REGARDLESS OF WHETHER SUCH DAMAGE WAS FORESEEABLE.4Copyright 2017 IEEE. All rights reserved.TranslationsThe IEEE consensus development process involves the review of documents in English only. In the event that an IEEE standard is translated, only the English

14、version published by IEEE should be considered the approved IEEE standard.Official statementsA statement, written or oral, that is not processed in accordance with the IEEE-SA Standards Board Operations Manual shall not be considered or inferred to be the official position of IEEE or any of its comm

15、ittees and shall not be considered to be, or be relied upon as, a formal position of IEEE. At lectures, symposia, seminars, or educational courses, an individual presenting information on IEEE standards shall make it clear that his or her views should be considered the personal views of that individ

16、ual rather than the formal position of IEEE.Comments on standardsComments for revision of IEEE Standards documents are welcome from any interested party, regardless of membership affiliation with IEEE. However, IEEE does not provide consulting information or advice pertain-ing to IEEE Standards docu

17、ments. Suggestions for changes in documents should be in the form of a proposed change of text, together with appropriate supporting comments. Since IEEE standards represent a consensus of concerned interests, it is important that any responses to comments and questions also receive the concur-rence

18、 of a balance of interests. For this reason, IEEE and the members of its societies and Standards Coordi-nating Committees are not able to provide an instant response to comments or questions except in those cases where the matter has previously been addressed. For the same reason, IEEE does not resp

19、ond to interpretation requests. Any person who would like to participate in revisions to an IEEE standard is welcome to join the relevant IEEE working group.Comments on standards should be submitted to the following address:Secretary, IEEE-SA Standards Board445 Hoes LanePiscataway, NJ 08854 USALaws

20、and regulationsUsers of IEEE Standards documents should consult all applicable laws and regulations. Compliance with the provisions of any IEEE Standards document does not imply compliance to any applicable regulatory require-ments. Implementers of the standard are responsible for observing or refer

21、ring to the applicable regulatory requirements. IEEE does not, by the publication of its standards, intend to urge action that is not in compliance with applicable laws, and these documents may not be construed as doing so.CopyrightsIEEE draft and approved standards are copyrighted by IEEE under U.S

22、. and international copyright laws. They are made available by IEEE and are adopted for a wide variety of both public and private uses. These include both use, by reference, in laws and regulations, and use in private self-regulation, standardization, and the promotion of engineering practices and m

23、ethods. By making these documents available for use and adop-tion by public authorities and private users, IEEE does not waive any rights in copyright to the documents.5Copyright 2017 IEEE. All rights reserved.PhotocopiesSubject to payment of the appropriate fee, IEEE will grant users a limited, non

24、-exclusive license to photocopy portions of any individual standard for company or organizational internal use or individual, non-commercial use only. To arrange for payment of licensing fees, please contact Copyright Clearance Center, Customer Ser-vice, 222 Rosewood Drive, Danvers, MA 01923 USA; +1

25、 978 750 8400. Permission to photocopy portions of any individual standard for educational classroom use can also be obtained through the Copyright Clearance Center.Updating of IEEE Standards documentsUsers of IEEE Standards documents should be aware that these documents may be superseded at any tim

26、e by the issuance of new editions or may be amended from time to time through the issuance of amendments, corri-genda, or errata. An official IEEE document at any point in time consists of the current edition of the document together with any amendments, corrigenda, or errata then in effect.Every IE

27、EE standard is subjected to review at least every ten years. When a document is more than ten years old and has not undergone a revision process, it is reasonable to conclude that its contents, although still of some value, do not wholly reflect the present state of the art. Users are cautioned to c

28、heck to determine that they have the latest edition of any IEEE standard.In order to determine whether a given document is the current edition and whether it has been amended through the issuance of amendments, corrigenda, or errata, visit the IEEE Xplore at http:/ieeexplore.ieee.org/ or contact IEE

29、E at the address listed previously. For more information about the IEEE-SA or IEEEs standards development process, visit the IEEE-SA Website at http:/standards.ieee.org.ErrataErrata, if any, for all IEEE standards can be accessed on the IEEE-SA Website at the following URL: http:/standards.ieee.org/

30、findstds/errata/index.html. Users are encouraged to check this URL for errata periodically.PatentsAttention is called to the possibility that implementation of this standard may require use of subject matter covered by patent rights. By publication of this standard, no position is taken by the IEEE

31、with respect to the existence or validity of any patent rights in connection therewith. If a patent holder or patent applicant has filed a statement of assurance via an Accepted Letter of Assurance, then the statement is listed on the IEEE-SA Website at http:/standards.ieee.org/about/sasb/patcom/pat

32、ents.html. Letters of Assurance may indicate whether the Submitter is willing or unwilling to grant licenses under patent rights without compensation or under reasonable rates, with reasonable terms and conditions that are demonstrably free of any unfair discrim-ination to applicants desiring to obt

33、ain such licenses.Essential Patent Claims may exist for which a Letter of Assurance has not been received. The IEEE is not re-sponsible for identifying Essential Patent Claims for which a license may be required, for conducting inquiries into the legal validity or scope of Patents Claims, or determi

34、ning whether any licensing terms or conditions provided in connection with submission of a Letter of Assurance, if any, or in any licensing agreements are reasonable or non-discriminatory. Users of this standard are expressly advised that determination of the valid-ity of any patent rights, and the

35、risk of infringement of such rights, is entirely their own responsibility. Further information may be obtained from the IEEE Standards Association.6Copyright 2017 IEEE. All rights reserved.ParticipantsAt the time this recommended practice was submitted to the IEEE-SA Standards Board for approval, th

36、e Power Electronics Working Group had the following membership:Yuri Khersonsky, ChairNorbert Doerry, Vice ChairTerry Ericsen, Vice ChairJoseph Pi , SecretaryDwight AlexanderJohn AmyFrank BascianoMichael BaslerThomas BassoRobert BehlRobert DurhamHerbert GinnBoris JacobsonJoseph L. Koep ngerRobert Kon

37、nikThomas LipoWilliam LockeyEarl MacDonaldAllan MantoothDavid MillsT. W. OlsenLorraine PaddenJulian Pro rDaniel SabinMichael SteurerGiorgio SulligoiAlbert TuckerJohn VergisJames WilsonTechnical comments from the following individuals have been implemented in this recommended practice:Paul BarnhartPa

38、ul BishopDushan BoroyevichCharles BrownDavid CartesNarain HingoraniMatti LehtiMirko MaksimcevGeorge RobinsonTimothy RobirdsJames H. RockotRobert SchuergerPeter SteimerEric VaughnFred WangThe following members of the individual balloting committee voted on this recommended practice. Balloters may hav

39、e voted for approval, disapproval, or abstention.David AhoAli Al AwaziDwight AlexanderRoy AlexanderSaleman AlibhayJohn AmyPaul BarnhartFrank BascianoMichael BaslerThomas BassoWilliam BloetheDennis BoghFrederick BrockhurstBill BrownGustavo BrunelloWilliam BushWilliam ByrdPaul CardinalLeo CaseyArvind

40、ChaudharyRobert ChristmanLarry ConradLuis CoronadoAlireza DaneshpooyMatthew DavisDavid E. De LucaMamadou DiongNorbert DoerryGary DonnerNeal DowlingErnest DuckworthRobert DurhamGearold O. H. EidhinTerry EricsenKevin FellhoelterWilliam FinleyKeith FlowersRostyslaw FostiakGary FoxCarl FredericksGeorge

41、GelaKenneth GettmanPaul GiorsettoAlexander Glaninger-KatschnigMietek GlinkowskiJalal GohariJ. Travis Gri thRandall GrovesAjit GwalPaul HamerWerner HoelzlJohn HoudekRichard JacksonLaszlo KadarInnocent KamwaJohn KayYuri KhersonskyHermann KochGerald KolbeSaumen KunduBenjamin LanzMichael LauxmanWei-Jen

42、LeeDuane LeschertHua LiuEarl Mac DonaldArturo MaldonadoJohn MalinowskiHomer Alan MantoothJohn MartinPeter MegnaDaniel MulkeyJerry MurphyRhonda Netzel7Copyright 2017 IEEE. All rights reserved.Michael NewmanGary NissenT. W. OlsenLorraine PaddenRichard PaesMirko PalazzoHoward PenroseKevin PetersonChris

43、topher PetrolaK. James PhillipsJoseph Pi Donald PlattsPercy PoolIulian Pro rMichael RobertsTimothy RobirdsCharles RogersJoseph RostronDaniel SabinSteven SanoTodd SauveBartien SayogoTed SchoenbergRobert SchuergerCarl SchuetzNikunj ShahDevki SharmaJeremy SmithGary SmullinWayne StecRalph StellMichael S

44、teurerEugene StoudenmireK. StumpPeter SutherlandMichael ThompsonRobert Thornton-JonesAlbert TuckerDemetrios TziouvarasEric UdrenJames Van De LigtEric VaughnJohn VergisDaniel WardHung-Yu WeiYingli WenKenneth WhiteKenneth WhiteJames WilsonIain WrightJian YuWhen the IEEE-SA Standards Board approved thi

45、s recommended practice on 22 September 2016, it had the following membership:Jean-Philippe Faure, ChairTed Burse, Vice ChairJohn D. Kulick, Past ChairKonstantinos Karachalios, SecretaryChuck AdamsMasayuki AriyoshiStephen DukesJianbin FanJ. Travis Gri thGary Ho manRonald W. HotchkissMichael JanezicJo

46、seph L. Koep nger*Hung LingKevin LuAnnette D. ReillyGary RobinsonMehmet UlemaYingli WenHoward WolfmanDon WrightYu YuanDaidi Zhong*Member Emeritus8Copyright 2017 IEEE. All rights reserved.IntroductionThis introduction is not part of IEEE Std 1662-2016, IEEE Recommended Practice for the Design and App

47、lication of Power Electronics in Electrical Power Systems.This revision of IEEE Std 1662-2008 provides recommendations and requirements for the design and ap-plications of power electronics in land-based and marine electrical power systems. It covers a wide range of power electronics equipment with

48、aggregated power ratings at and above 100 kW with voltages equal or less than 52 kV (ac) or (dc). It describes existing engineering practices, analytical methods, and performance char-acteristics. Applicable international and local standards are referenced with guidance to provide users of this stan

49、dard with correct criteria for analysis, design, testing, and maintenance of power electronics and reliable integration of power electronics in electrical power systems.AcknowledgmentsPermissions have been granted as follows:1 Figure 3 reprinted with permission from the Information Technology Industry Council, ITI (CBEMA) Curve, 2000 B32. Figure B.1 reprinted with permission from Fuji Electric Co., Ltd., Fuji Electric Review, “Power Elec-tronics Technology that Supports Smart Grid” B49 2011.1Every effort has been made to secure permission to reprint borrowe