IEEE 1202 CORR 1-2012 en Flame-Propagation Testing of Wire and Cable Corrigendum 1《电线和电缆的火焰传播试验用IEEE标准 勘误表1》.pdf

《IEEE 1202 CORR 1-2012 en Flame-Propagation Testing of Wire and Cable Corrigendum 1《电线和电缆的火焰传播试验用IEEE标准 勘误表1》.pdf》由会员分享，可在线阅读，更多相关《IEEE 1202 CORR 1-2012 en Flame-Propagation Testing of Wire and Cable Corrigendum 1《电线和电缆的火焰传播试验用IEEE标准 勘误表1》.pdf（14页珍藏版）》请在麦多课文档分享上搜索。

1、 IEEE Standard for Flame-Propagation Testing of Wire and Cable Corrigendum 1 Sponsored by the Insulated Conductors Committee IEEE 3 Park Avenue New York, NY 10016-5997 USA 21 November 2012 IEEE Power and Energy Society IEEE Std 1202-2006/Cor 1-2012 (Corrigendum to IEEE Std 1202-2006) IEEE Std 1202-2

2、006/Cor 1-2012 (Corrigendum to IEEE Std 1202-2006) IEEE Standard for Flame-Propagation Testing of Wire and Cable Corrigendum 1 Sponsor Insulated Conductors Committee of the IEEE Power and Energy Society Approved 19 October 2012 IEEE-SA Standards Board Abstract: Corrected English unit conversions are

3、 included in this corrigendum to IEEE Std 1202-2006. Keywords: 20 kW, 20 min, 70 000 Btu/h, after burn, cable, char, charring, flame propagation, IEEE 1202, test protocol, vertical cable tray, wire The Institute of Electrical and Electronics Engineers, Inc. 3 Park Avenue, New York, NY 10016-5997, US

4、A Copyright 2012 by The Institute of Electrical and Electronics Engineers, Inc. All rights reserved. Published 21 November 2012. Printed in the United States of America. IEEE is a registered trademark in the U.S. Patent +1 978 750 8400. Permission to photocopy portions of any individual standard for

5、 educational classroom use can also be obtained through the Copyright Clearance Center. Notice to users Laws and regulations Users of IEEE Standards documents should consult all applicable laws and regulations. Compliance with the provisions of any IEEE Standards document does not imply compliance t

6、o any applicable regulatory requirements. Implementers of the standard are responsible for observing or referring to the applicable regulatory requirements. IEEE does not, by the publication of its standards, intend to urge action that is not in compliance with applicable laws, and these documents m

7、ay not be construed as doing so. Copyrights This document is copyrighted by the IEEE. It is made available for a wide variety of both public and private uses. These include both use, by reference, in laws and regulations, and use in private self-regulation, standardization, and the promotion of engi

8、neering practices and methods. By making this document available for use and adoption by public authorities and private users, the IEEE does not waive any rights in copyright to this document. Updating of IEEE documents Users of IEEE Standards documents should be aware that these documents may be su

9、perseded at any time by the issuance of new editions or may be amended from time to time through the issuance of amendments, corrigenda, or errata. An official IEEE document at any point in time consists of the current edition of the document together with any amendments, corrigenda, or errata then

10、in effect. In order to determine whether a given document is the current edition and whether it has been amended through the issuance of amendments, corrigenda, or errata, visit the IEEE-SA Website at http:/standards.ieee.org/index.html or contact the IEEE at the address listed previously. For more

11、information about the IEEE Standards Association or the IEEE standards development process, visit IEEE-SA Website at http:/standards.ieee.org/index.html. Errata Errata, if any, for this and all other standards can be accessed at the following URL: http:/standards.ieee.org/findstds/errata/index.html.

12、 Users are encouraged to check this URL for errata periodically. Patents Attention is called to the possibility that implementation of this standard may require use of subject matter covered by patent rights. By publication of this standard, no position is taken by the IEEE with respect to the exist

13、ence or validity of any patent rights in connection therewith. If a patent holder or patent applicant has filed a statement of assurance via an Accepted Letter of Assurance, then the statement is listed on the IEEE-SA Website at http:/standards.ieee.org/about/sasb/patcom/patents.html. Letters of Ass

14、urance may indicate whether the Submitter is willing or unwilling to grant licenses under patent rights without compensation or under reasonable rates, with reasonable terms and conditions that are demonstrably free of any unfair discrimination to applicants desiring to obtain such licenses. Essenti

15、al Patent Claims may exist for which a Letter of Assurance has not been received. The IEEE is not responsible for identifying Essential Patent Claims for which a license may be required, for conducting inquiries into the legal validity or scope of Patents Claims, or determining whether any licensing

16、 terms or conditions provided in connection with submission of a Letter of Assurance, if any, or in any licensing agreements are reasonable or non-discriminatory. Users of this standard are expressly advised that determination of the validity of any patent rights, and the risk of infringement of suc

17、h rights, is entirely their own responsibility. Further information may be obtained from the IEEE Standards Association. Copyright 2012 IEEE. All rights reserved. vi Participants At the time this draft standard was completed, the Flame Propagation Testing Working Group had the following membership:

18、Charles Hills, Chair Gabriel Taylor, Vice Chair Kenneth E. Bow William Gayland Bloethe John R. Cancelosi James Conrad Chris K. Durland Jim Fitzgerald Sean Foley Robert Gehm Steven N. Graham Ajit K. Gwal Wes Kegarise Robert L. Konnik Philip Laudicina Gerald Liskom Antoine Machon Arturo Maldonado John

19、 E. Merando, Jr. Robert Segura Gil Shoshani Albert H. Spear III Rick Williamson Robert Wobick Carl Zuidema The following members of the individual balloting committee voted on this standard. Balloters may have voted for approval, disapproval, or abstention. Satish Aggarwal Saleman Alibhay John Barke

20、r William Gayland Bloethe Kenneth Bow Nissen Burstein Thomas Campbell John R. Cancelosi Suresh Channarasappa Weijen Chen Ray Davis Gary Donner Gary Engmann Wells Fargo James Gleason Steven N. Graham Randall Groves Hamidreza Heidarisafa Lee Herron Lauri Hiivala Werner Hoelzl Peter Hung Joseph L. Koep

21、finger Robert L. Konnik Jim Kulchisky Chung-Yiu Lam Philip Laudicina Michael Lauxman Gerald Liskom Greg Luri Daniel Mainstruck Arturo Maldonado William McBride John E. Merando, Jr. Jerry Murphy Michael S. Newman Lorraine Padden Jan Pirrong Stephen Sandberg Bartien Sayogo Gil Shultz Jerry Smith Nagu

22、Srinivas Gary Stoedter John Vergis Kenneth White Dawn Zhao When the IEEE-SA Standards Board approved this standard on , it had the following membership: Richard H. Hulett, Chair John Kulick, Vice Chair Robert M. Grow, Past Chair Konstantinos Karachalios, Secretary Satish Aggarwal Masayuki Ariyoshi P

23、eter Balma William Bartley Ted Burse Clint Chaplin Wael Diab Jean-Philippe Faure Alexander Gelman Paul Houz Jim Hughes Joseph L. Koepfinger* David J. Law Thomas Lee Hung Ling Oleg Logvinov Ted Olsen Gary Robinson Jon Walter Rosdahl Sam Sciacca Mike Seavey Yatin Trivedi Phil Winston Don Wright *Membe

24、r Emeritus Copyright 2012 IEEE. All rights reserved. vii Also included are the following nonvoting IEEE-SA Standards Board liaisons: Richard DeBlasio, DOE Representative Michael Janezic, NIST Representative Patrick Gibbons IEEE Standards Program Manager, Document Development Malia Zaman IEEE Standar

25、ds Program Manager, Technical Program Development Copyright 2012 IEEE. All rights reserved. viii Introduction This introduction is not part of IEEE Std 1202-2006/Cor 1-2012, IEEE Standard for Flame-Propagation Testing of Wire and CableCorrigendum 1. Corrected English unit conversions are included in

26、 this corrigendum to IEEE Std 1202-2006. Copyright 2012 IEEE. All rights reserved. ix Contents 4. Flame test facility 2 6. Flame test procedure 2 Copyright 2012 IEEE. All rights reserved. 1IEEE Standard for Flame-Propagation Testing of Wire and Cable Corrigendum 1 IMPORTANT NOTICE: IEEE Standards do

27、cuments are not intended to ensure safety, health, or environmental protection, or ensure against interference with or from other devices or networks. Implementers of IEEE Standards documents are responsible for determining and complying with all appropriate safety, security, environmental, health,

28、and interference protection practices and all applicable laws and regulations. This IEEE document is made available for use subject to important notices and legal disclaimers. These notices and disclaimers appear in all publications containing this document and may be found under the heading “Import

29、ant Notice” or “Important Notices and Disclaimers Concerning IEEE Documents.” They can also be obtained on request from IEEE or viewed at http:/standards.ieee.org/IPR/disclaimers.html. NOTEThe editing instructions contained in this corrigendum define how to merge the material contained therein into

30、the existing base standard and its amendments to form the comprehensive standard. The editing instructions are shown in bold italic. Four editing instructions are used: change, delete, insert, and replace. Change is used to make corrections in existing text or tables. The editing instruction specifi

31、es the location of the change and describes what is being changed by using strikethrough (to remove old material) and underscore (to add new material). Delete removes existing material. Insert adds new material without disturbing the existing material. Insertions may require renumbering. If so, renu

32、mbering instructions are given in the editing instruction. Replace is used to make changes in figures or equations by removing the existing figure or equation and replacing it with a new one. Editing instructions, change markings, and this NOTE will not be carried over into future editions because t

33、he changes will be incorporated into the base standard. IEEE Std 1202-2006/Cor1-2012 IEEE Standard for Flame Propagation Testing of Wire and CableCorrigendum 1 Copyright 2012 IEEE. All rights reserved. 24. Flame test facility 4.1.3 Air intakes Change the English measurement as shown below: The total

34、 cross-sectional area of the air intakes shall be 1.45 m2 0.03 m2(15.63 15.61 ft2 35 0.32 ft2), and the intake areas shall be divided approximately equal. 6. Flame test procedure 6.2.2 Exhaust duct flow rate Replace the English portion of Equation (2) with the following equation: TpkAoTTopkAvCsV 098256.0 2ft3/s (English) 6.2.4 Airflow and air temperature Change the English measurement as shown below: The airflow rate shall be 1280 cm3/s 8 cm3/s (163 ft3/h 10 1 ft3/h) when corrected to standard temperature and pressure.