ANSI ASSE A10 1-2011 Pre-Project & Pre-Task Safety and Health Planning for Construction and Demolition Operations《建造和拆除工作的前期项目和前期任务的安全和健康规划》.pdf

《ANSI ASSE A10 1-2011 Pre-Project & Pre-Task Safety and Health Planning for Construction and Demolition Operations《建造和拆除工作的前期项目和前期任务的安全和健康规划》.pdf》由会员分享，可在线阅读，更多相关《ANSI ASSE A10 1-2011 Pre-Project & Pre-Task Safety and Health Planning for Construction and Demolition Operations《建造和拆除工作的前期项目和前期任务的安全和健康规划》.pdf（36页珍藏版）》请在麦多课文档分享上搜索。

1、Printed in U.S.A. AS SE AMERICANSOCIETY OF SAFETYENGINEERS AMERICANNATIONALSTANDARD ANSI/ASSE A10.1 2011 ANSI/ASSE A10.1 2011 Pre-Project their existence does not in any respect preclude anyone, whether he/she has approved the standards or not, from manufacturing, marketing, purchasing, or using pro

2、ducts, processes, or procedures not conforming to the standards. The American National Standards Institute does not develop standards and will in no circumstance give an interpretation of any American National Standard. Moreover, no person shall have the right or authority to issue an interpretation

3、 of an American National Standard in the name of the American National Standards Institute. Requests for interpretation should be addressed to the secretariat or sponsor whose name appears on the title page of this standard. Caution Notice: This American National Standard may be revised or withdrawn

4、 at any time. The procedures of the American National Standards Institute require that action be taken periodically to reaffirm, revise, or withdraw this standard. Purchasers of American National Standards may receive current information on all standards by calling or writing the American National S

5、tandards Institute. Published February, 2012 by: American Society of Safety Engineers 1800 East Oakton Street Des Plaines, Illinois 60018-2187 (847) 699-2929 www.asse.org Copyright 2012 by the American Society of Safety Engineers All Rights Reserved. No part of this publication may be reproduced in

6、any form, in an electronic retrieval system or otherwise, without the prior written permission of the publisher. Printed in the United States of America American National Standard Copyright American Society of Safety Engineers Provided by IHS under license with ASSE/SAFE Licensee=CHINA STDS INFORMAT

7、ION CENTER - avada indx app by/5954931001, User=Zhao Not for Resale, 05/02/2012 00:35:17 MDT No reproduction or networking permitted without license from IHS -,-,- Foreword (This Foreword is not a part of American National Standard A10.1-2011.) This standard is one of a series of safety standards th

8、at have been formulated by the Accredited Standards Committee on Safety in Construction and Demolition Operations, A10. It is expected that the standards in the A10 series will find a major application in industry, serving as a guide to contractors, labor, and equipment manufacturers. For the conven

9、ience of users, a list of existing and proposed standards in the A10 series for Safety Requirements in Construction and Demolition Operations follows. A10.1 Pre-Project & Pre-Task Safety & Health Planning A10.2 Safety, Health, and Environmental Training (under development) A10.3 Powder-Actuated Fast

10、ening Systems A10.4 Personnel Hoists and Employee Elevators A10.5 Material Hoists A10.6 Demolition Operations A10.7 Transportation, Storage, Handling, and Use of Commercial Explosives and Blasting Agents A10.8 Scaffolding A10.9 Concrete and Masonry Construction A10.10 Temporary and Portable Space He

11、ating Devices A10.11 Personnel and Debris Nets A10.12 Excavation A10.13 Steel Erection A10.15 Dredging A10.16 Tunnels, Shafts, and Caissons A10.17 Safe Operating Practices for Hot Mix Asphalt (HMA) Construction A10.18 Temporary Roof and Floor Holes, Wall Openings, Stairways, and Other Unprotected Ed

12、ges A10.19 Pile Installation and Extraction Operations A10.20 Ceramic Tile, Terrazzo, and Marble Work A10.21 Safe Construction and Demolition of Wind Generation/Turbine Facilities (under development) A10.22 Rope-Guided and Non-Guided Workers Hoists A10.23 Safety Requirements for the Installation of

13、Drilled Shafts (under development) A10.24 Roofing Safety Requirements for Low-Sloped Roofs A10.25 Sanitation in Construction A10.26 Emergency Procedures for Construction Sites A10.27 Hot Mix Asphalt Facilities A10.28 Work Platforms Suspended from Cranes or Derricks A10.29 Aerial Platforms in Constru

14、ction (under development) A10.31 Digger-Derricks A10.32 Personal Fall Protection Used in Construction and Demolition Operations A10.33 Safety and Health Program Requirements for Multi-Employer Projects A10.34 Public Protection A10.37 Debris Nets A10.38 Basic Elements of a Program to Provide a Safe a

15、nd Healthful Work Environment A10.39 Construction Safety and Health Audit Program A10.40 Reduction of Musculoskeletal Problems in Construction A10.41 Equipment Operator and Supervisor Qualifications and Responsibilities (under development) Copyright American Society of Safety Engineers Provided by I

16、HS under license with ASSE/SAFE Licensee=CHINA STDS INFORMATION CENTER - avada indx app by/5954931001, User=Zhao Not for Resale, 05/02/2012 00:35:17 MDT No reproduction or networking permitted without license from IHS -,-,-A10.42 Rigging Qualifications and Responsibilities in the Construction Indust

17、ry A10.43 Confined Spaces in Construction (under development) A10.44 Lockout/Tagout in Construction A10.46 Hearing Loss Prevention A10.47 Highway Construction Safety A10.48 Communication Tower Erection (under development) A10.49 Control of Health Hazards (under development) One purpose of these stan

18、dards is to serve as guides to governmental authorities having jurisdiction over subjects within the scope of the A10 Committee standards. If these standards are adopted for governmental use, the reference of other national codes or standards in individual volumes may be changed to refer to the corr

19、esponding regulations. Revisions: The A10 Committee welcomes proposals for revisions to this standard. Revisions are made to the standard periodically (usually five years from the date of the standard) to incorporate changes that appear necessary or desirable, as demonstrated by experience gained fr

20、om the application of the standard. Proposals should be as specific as possible, citing the relevant paragraph number(s), the proposed wording, and the reason for the proposal. Pertinent documentation would enable the A10 Committee to process the changes in a more timely manner. Interpretations: Upo

21、n a request in writing to the Secretariat, the A10 Committee will render an interpretation of any requirement of the standard. The request for interpretation should be clear, citing the relevant paragraph number(s) and phrased as a request for a clarification of a specific requirement. Oral interpre

22、tations are not provided. No one but the A10 Committee (through the A10 Secretariat) is authorized to provide any interpretation of this standard. Approval: Neither the A10 Committee nor American National Standards Institute (ANSI) “approves,“ “certifies,“ “rates,“ or “endorses“ any item, constructi

23、on, proprietary device, or activity. Appendices: Appendices are included in most standards to provide the user with additional information related to the subject of the standard. Appendices are not part of the approved standard. Committee Meetings: The A10 Committee meets twice a year. Persons wishi

24、ng to attend a meeting should contact the Secretariat for information. Standard Approval: This standard was processed and approved for submittal to ANSI by the American National Standards Committee on Safety in Construction and Demolition Operations, A10. Approval of the standard does not necessaril

25、y imply (nor is it required) that all Committee members voted for its approval. At the time this standard was published, the A10 Committee had the following members: Copyright American Society of Safety Engineers Provided by IHS under license with ASSE/SAFE Licensee=CHINA STDS INFORMATION CENTER - a

26、vada indx app by/5954931001, User=Zhao Not for Resale, 05/02/2012 00:35:17 MDT No reproduction or networking permitted without license from IHS -,-,-Richard King, CSP, Chairman James Tomaseski, Vice Chairman Timothy R. Fisher, CSP, CHMM, ARM, CPEA, Secretary Jennie Dalesandro, Administrative Technic

27、al Support Organization Represented Name of Representative Accident Prevention Corporation Frank Burg, CSP, P.E. Michael Serpe, CSP Aegis Corporation Matthew J. Burkart, P.E. Judith Burkart Alstom Power Robert Renney Ted P. Sharp American Insurance Services Group Thad Nosal James G. Borchardt, CSP,

28、CPE ASCE - Construction Institute Committee William R. Nash, P.E. American Society of Safety Engineers Ken Shorter, CSP, ARM A. David Brayton, CSP, CPC American Wind Energy Association Michele Myers Mihelic American Work Platform Training, Inc. Dennis W. Eckstine Asbestos Workers International Union

29、 Terry Lynch Jim E. Lapping, MS, P.E., CSP Associated Builders and Contractors, Inc. Chris Williams Associated General Contractors of America, The Charlie Bird Kevin Cannon Association of Union Constructors, The Wayne Creasap, II A-Z Safety Resources, Inc. Jane F. Williams, CPEA, CCA Barton-Malow Co

30、mpany Mark Klimbal, CSP, ARM Clayton Shafer Black & Veatch Richard F. King, CSP John H. Johnson Building & Construction Trades Department Pete Stafford Jim Platner, Ph.D., CIH CPWR - Center for Construction Research & Training Mike McCann, Ph.D., CIH Pete Stafford Capital Safety Group Scott C. Caseb

31、olt J. Thomas Wolner, P.E. Clark Construction Group Tim Sirofchuck, CSP Kurt Dunmire Cole-Preferred Safety Consulting, Inc. Barry Cole Philip L. Colleran Philip L. Colleran, CSP Construction & Realty Safety Group, Inc. Ron Lattanzio Frank Marino ECI Safety Services Co. Anthony Merisola Patrick Brenn

32、an, CSHM, CSSM Edison Electric Institute R. Lee Reed, Jr. Charles Kelly E. I. Dupont de Nemours & Company Gary Birchall Ronald Probasco, CSP Elevator Industry Preservation Fund Garry Kosinski Rod Gilles Ellis Fall Safety Solutions J. Nigel Ellis, Ph.D., P.E., CSP, CPE John Whitty, P.E. Gilbane Build

33、ing Co. Anthony ODea, CSP, CHST Copyright American Society of Safety Engineers Provided by IHS under license with ASSE/SAFE Licensee=CHINA STDS INFORMATION CENTER - avada indx app by/5954931001, User=Zhao Not for Resale, 05/02/2012 00:35:17 MDT No reproduction or networking permitted without license

34、 from IHS -,-,- Charles Praul, Jr., ASP Richard D. Hislop Richard Hislop Independent Electrical Contractors, Inc. John P. Masarick Bob Baird Institute of Makers of Explosives Lon D. Santis Susan JP Flanagan International Association of Bridge, Structural, Ornamental and Reinforcing Iron Workers Stev

35、e Rank Robert Migliaccio, Sr. International Brotherhood of Boilermakers Brian Loftus Bridget Connors International Brotherhood of Electrical Workers James Tomaseski International Brotherhood of Teamsters LaMont Byrd, CIH Julie Plavka International Safety Equipment Association Cristine Fargo Internat

36、ional Union of Bricklayers & Allied Craftworkers Michael Kassman, CHST Eileen Betit International Union of Operating Engineers Emmett Russell Steve Brown Jack L. Mickle & Associates Jack Mickle, Ph.D., P.E. Steve Stock, P.E., PLS Laborers International Union of North America Scott Schneider, MS, CIH

37、 Walter A. Jones, MS Marsh USA, Inc. Timothy Bergeron, CSP Maryland Occupational Safety & Health Mischelle Vanreusel Eric Uttenreither Mechanical Contractors Association of America Peter Chaney, MS, CSP Dennis Langley MYR Group, Inc. National Association of Home Builders Robert Matuga Marcus Odorizz

38、i National Association of Railroad Safety Consultants & Investigators Lewis Barbe, P.E., CSP, CRSP National Electrical Contractors Association Michael J. Johnston Jerry Rivera National Institute for Occupational Safety & Health Thomas G. Bobick, Ph.D., P.E., CSP, CPE Matt Gillen, CIH National Railro

39、ad Contractors & Maintenance Association Jeffrey D. Meddin, CSP, CHCM, CHEP National Roofing Contractors Association Harry Dietz Tom Shanahan National Society of Professional Engineers E. Ross Curtis, P.E., DFE Paul Swanson, P.E. Operative Plasterers and Cement Masons International Association Geral

40、d Ryan Daniel M. Paine Daniel M. Paine Barbara Paine Phoenix Fabricators and Erectors, Inc. Robert E. Clouse, CSP, CHST Frank Massey Powder Actuated Tool Manufacturers Institute James A. Borchers David Jablonski Power Consultants, Incorporated David Goldsmith Camille Villanova Professional Safety Co

41、nsultants, Inc. Jim E. Lapping, MS, P.E., CSP Anthony Brown Property Casualty Insurers Association of America John Rabovsky, MS, CSP, ARM Copyright American Society of Safety Engineers Provided by IHS under license with ASSE/SAFE Licensee=CHINA STDS INFORMATION CENTER - avada indx app by/5954931001, User=Zhao Not for Resale, 05/02/2012 00:35:17 MDT No reproduction or networking permitted without license from IHS -,-,-