IEC 62361-2-2013 Power systems management and associated information exchange - Interoperability in the long term - Part 2 End-to-end quality codes for supervis.pdf

《IEC 62361-2-2013 Power systems management and associated information exchange - Interoperability in the long term - Part 2 End-to-end quality codes for supervis.pdf》由会员分享，可在线阅读，更多相关《IEC 62361-2-2013 Power systems management and associated information exchange - Interoperability in the long term - Part 2 End-to-end quality codes for supervis.pdf（106页珍藏版）》请在麦多课文档分享上搜索。

1、 IEC 62361-2 Edition 1.0 2013-09 INTERNATIONAL STANDARD NORME INTERNATIONALE Power systems management and associated information exchange Interoperability in the long term Part 2: End to end quality codes for supervisory control and data acquisition (SCADA) Gestion des systmes de puissance et change

2、s dinformations associs Interoprabilit long terme Partie 2: Codes de qualit de bout en bout pour le contrle de supervision et acquisition de donnes (SCADA) IEC 62361-2:2013 colour inside THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2013 IEC, Geneva, Switzerland All rights reserved. Unless other

3、wise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or IECs member National Committee in the country of the requester. If you have any ques

4、tions about IEC copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or your local IEC member National Committee for further information. Droits de reproduction rservs. Sauf indication contraire, aucune partie de cette publication ne pe

5、ut tre reproduite ni utilise sous quelque forme que ce soit et par aucun procd, lectronique ou mcanique, y compris la photocopie et les microfilms, sans laccord crit de la CEI ou du Comit national de la CEI du pays du demandeur. Si vous avez des questions sur le copyright de la CEI ou si vous dsirez

6、 obtenir des droits supplmentaires sur cette publication, utilisez les coordonnes ci-aprs ou contactez le Comit national de la CEI de votre pays de rsidence. IEC Central Office Tel.: +41 22 919 02 11 3, rue de Varemb Fax: +41 22 919 03 00 CH-1211 Geneva 20 infoiec.ch Switzerland www.iec.ch About the

7、 IEC The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes International Standards for all electrical, electronic and related technologies. About IEC publications The technical content of IEC publications is kept under constant review by t

8、he IEC. Please make sure that you have the latest edition, a corrigenda or an amendment might have been published. Useful links: IEC publications search - www.iec.ch/searchpub The advanced search enables you to find IEC publications by a variety of criteria (reference number, text, technical committ

9、ee,). It also gives information on projects, replaced and withdrawn publications. IEC Just Published - webstore.iec.ch/justpublished Stay up to date on all new IEC publications. Just Published details all new publications released. Available on-line and also once a month by email. Electropedia - www

10、.electropedia.org The worlds leading online dictionary of electronic and electrical terms containing more than 30 000 terms and definitions in English and French, with equivalent terms in additional languages. Also known as the International Electrotechnical Vocabulary (IEV) on-line. Customer Servic

11、e Centre - webstore.iec.ch/csc If you wish to give us your feedback on this publication or need further assistance, please contact the Customer Service Centre: csciec.ch. A propos de la CEI La Commission Electrotechnique Internationale (CEI) est la premire organisation mondiale qui labore et publie

12、des Normes internationales pour tout ce qui a trait llectricit, llectronique et aux technologies apparentes. A propos des publications CEI Le contenu technique des publications de la CEI est constamment revu. Veuillez vous assurer que vous possdez ldition la plus rcente, un corrigendum ou amendement

13、 peut avoir t publi. Liens utiles: Recherche de publications CEI - www.iec.ch/searchpub La recherche avance vous permet de trouver des publications CEI en utilisant diffrents critres (numro de rfrence, texte, comit dtudes,). Elle donne aussi des informations sur les projets et les publications rempl

14、aces ou retires. Just Published CEI - webstore.iec.ch/justpublished Restez inform sur les nouvelles publications de la CEI. Just Published dtaille les nouvelles publications parues. Disponible en ligne et aussi une fois par mois par email. Electropedia - www.electropedia.org Le premier dictionnaire

15、en ligne au monde de termes lectroniques et lectriques. Il contient plus de 30 000 termes et dfinitions en anglais et en franais, ainsi que les termes quivalents dans les langues additionnelles. Egalement appel Vocabulaire Electrotechnique International (VEI) en ligne. Service Clients - webstore.iec

16、.ch/csc Si vous dsirez nous donner des commentaires sur cette publication ou si vous avez des questions contactez-nous: csciec.ch. IEC 62361-2 Edition 1.0 2013-09 INTERNATIONAL STANDARD NORME INTERNATIONALE Power systems management and associated information exchange Interoperability in the long ter

17、m Part 2: End to end quality codes for supervisory control and data acquisition (SCADA) Gestion des systmes de puissance et changes dinformations associs Interoprabilit long terme Partie 2: Codes de qualit de bout en bout pour le contrle de supervision et acquisition de donnes (SCADA) INTERNATIONAL

18、ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE XA ICS 33.200 PRICE CODE CODE PRIX ISBN 978-2-8322-1081-9 Registered trademark of the International Electrotechnical Commission Marque dpose de la Commission Electrotechnique Internationale Warning! Make sure that you obtained th

19、is publication from an authorized distributor. Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agr. colour inside 2 62361-2 IEC:2013 CONTENTS FOREWORD . 5 INTRODUCTION . 7 1 Scope . 8 2 Normative references . 8 3 Terms and definitions . 9 4 Overview of app

20、licable IEC standards 9 5 Quality code flow diagram from substation to control center . 10 6 List of quality codes by existing standards 12 6.1 Comparison of quality codes in existing standards. 12 6.2 IEC 60870-5-101/ IEC 60870-5-104 quality codes . 14 Data related quality . 14 6.2.1Timestamp and r

21、elated quality . 14 6.2.2 6.3 IEC 60870-5-103 quality codes 15 6.4 IEC 60870-6 (TASE.2) quality codes . 15 Data related quality . 15 6.4.1Timestamp and related quality . 16 6.4.2 6.5 IEC 61850 quality codes (from IEC 61850-7-3) 17 Data related quality . 17 6.5.1Quality in the client server context .

22、 19 6.5.2Relation between quality identifiers . 21 6.5.3Timestamp and related quality . 22 6.5.4 6.6 IEC 61970-301 quality codes . 24 General . 24 6.6.1MeasurementValueQuality Attributes defined in IEC 61970-301. 24 6.6.2MeasurementValueSource naming conventions . 25 6.6.3 6.7 OPC and OMG quality co

23、des . 26 OPC DA quality codes . 26 6.7.1DAIS Data Access Quality codes . 28 6.7.2Timestamp and related quality . 32 6.7.3 6.8 OPC UA Data Access Status Codes 33 Overview . 33 6.8.1Operation level result codes 33 6.8.2 7 Mapping of quality codes between standards 34 7.1 General . 34 7.2 Mapping from

24、IEC 61850 to IEC 60870-5-101/ IEC 60870-5-104 . 34 7.3 Mapping from IEC 60870-5-101/IEC 60870-5-104 to IEC 61970-301 . 36 7.4 Mapping from IEC 61850 to IEC 61970-301 . 37 7.5 Mapping from IEC 60870-6 to IEC 61970-301 39 7.6 Mapping from IEC 61970-301 to IEC 60870-6 40 7.7 Mapping from IEC 61850 to D

25、AIS DA and OPC DA . 42 8 Common quality codes across the power systems information exchange standards 44 8.1 Common quality codes 44 8.2 Quality code definitions . 44 Validity quality codes . 44 8.2.1Detailed quality codes . 45 8.2.262361-2 IEC:2013 3 Additional quality codes . 48 8.2.3Timestamp rel

26、ated quality codes . 48 8.2.4Source quality codes . 48 8.2.5Figure 1 Overview IEC power systems information exchange standards 9 Figure 2 Example of quality code flow diagram from substation to remote control center . 11 Figure 3 Quality type definitions . 17 Figure 4 Quality identifiers in a single

27、 client server relationship 20 Figure 5 Quality identifiers in a multiple client server relationship . 20 Figure 6 Interaction of substitution and validity 22 Figure 7 MeasurementValueQuality attributes inherited from IEC 61850 25 Figure 8 OMG DAIS quality codes 30 Table 1 Overview of quality codes

28、in existing standards . 13 Table 2 Validity attribute values . 16 Table 3 CurrentSource attribute values 16 Table 4 NormalSource attribute values 16 Table 5 NormalValue attribute values. 16 Table 6 DetailQual relation to invalid or questionable . 18 Table 7 TimeStamp type definition . 23 Table 8 Tim

29、eQuality definition excerpt from IEC 61850-7-2:2010, Table 8 . 23 Table 9 TimeAccuracy excerpt from IEC 61850-5:2013, Table 9 24 Table 10 Example MeasurementValueSource naming conventions 25 Table 11 Lower 8 bits of OPC DA quality flags . 26 Table 12 OPC standard quality BitField definition 26 Table

30、 13 Substatus for BAD quality 27 Table 14 Substatus for UNCERTAIN quality . 27 Table 15 Substatus for GOOD quality 28 Table 16 Limit BitField contents . 28 Table 17 OPCQuality members 30 Table 18 Quality, status and limit bit masks . 30 Table 19 Main quality enumerations . 30 Table 20 Detailed quali

31、ty flags for bad quality 31 Table 21 Detailed quality flags for uncertain quality . 31 Table 22 Definition of limit flags . 31 Table 23 DAIS masks 32 Table 24 DAIS flags defining source 32 Table 25 Timestamp for DAIS quality flags . 32 Table 26 Bad operation level result codes 33 Table 27 Uncertain

32、operation level result codes . 33 Table 28 Good operation level result codes . 34 Table 29 Mapping from IEC 61850 to IEC 60870-5-101/IEC 60870-5-104 35 Table 30 Mapping from IEC 60870-5-101/IEC 60870-5-104 to IEC 61970-301 . 36 4 62361-2 IEC:2013 Table 31 Mapping from IEC 61850 to IEC 61970-301 . 38

33、 Table 32 Mapping from IEC 60870-6 to IEC 61970-301 39 Table 33 Mapping from IEC 61970-301 to IEC 60870-6 41 Table 34 Mapping from IEC 61850 to DAIS DA and OPC DA . 42 Table 35 Validity quality codes . 45 Table 36 Detailed good quality codes . 45 Table 37 Detailed invalid quality codes 46 Table 38 D

34、etailed questionable quality codes 47 Table 39 Additional quality codes . 48 Table 40 Timestamp quality codes . 48 Table 41 Process and substituted quality codes . 49 62361-2 IEC:2013 5 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ POWER SYSTEMS MANAGEMENT AND ASSOCIATED INFORMATION EXCHANGE INTEROPER

35、ABILITY IN THE LONG TERM Part 2: End to end quality codes for supervisory control and data acquisition (SCADA) FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees)

36、. The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Sp

37、ecifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non- governmental organizat

38、ions liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matte

39、rs express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National

40、 Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC

41、National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself

42、does not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they

43、 have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature wh

44、atsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publ

45、ications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International St

46、andard IEC 62361-2 has been prepared by IEC technical committee 57: Power systems management and associated information exchange. The text of this standard is based on the following documents: FDIS Report on voting 57/1374/FDIS 57/1390/RVD Full information on the voting for the approval of this stan

47、dard can be found in the report on voting indicated in the above table. This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. 6 62361-2 IEC:2013 In this document, words printed in all CAPITALS or SMALL CAPITALS represent specific quality bits or codes. A list of all th

48、e parts in the IEC 62361 series, published under the general title Power systems management and associated information exchange Interoperability in the long term, can be found on the IEC website. The committee has decided that the contents of this publication will remain unchanged until the stabilit

49、y date indicated on the IEC web site under “http:/webstore.iec.ch“ in the data related to the specific publication. At this date, the publication will be reconfirmed, withdrawn, replaced by a revised edition, or amended. IMPORTANT The colour inside logo on the cover page of this publication indicates that it contains col