IEC 61966-12-2-2014 Multimedia systems and equipment - Colour measurement and management - Part 12-2 Simple Metadata format for identification of colour gamut《多.pdf

《IEC 61966-12-2-2014 Multimedia systems and equipment - Colour measurement and management - Part 12-2 Simple Metadata format for identification of colour gamut《多.pdf》由会员分享，可在线阅读，更多相关《IEC 61966-12-2-2014 Multimedia systems and equipment - Colour measurement and management - Part 12-2 Simple Metadata format for identification of colour gamut《多.pdf（22页珍藏版）》请在麦多课文档分享上搜索。

1、 IEC 61966-12-2 Edition 1.0 2014-04 INTERNATIONAL STANDARD Multimedia systems and equipment Colour measurement and management Part 12-2: Simple metadata format for identification of colour gamut IEC 61966-12-2:2014-04(en) THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2014 IEC, Geneva, Switzerlan

2、d All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or IECs member National Committee in the country of

3、the requester. If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or your local IEC member National Committee for further information. IEC Central Office Tel.: +41 22 919 02 11 3, rue de Varemb Fax:

4、 +41 22 919 03 00 CH-1211 Geneva 20 infoiec.ch Switzerland www.iec.ch About the IEC The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes International Standards for all electrical, electronic and related technologies. About IEC publicatio

5、ns The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the latest edition, a corrigenda or an amendment might have been published. IEC Catalogue - webstore.iec.ch/catalogue The stand-alone application for consulting the entire bibliograp

6、hical information on IEC International Standards, Technical Specifications, Technical Reports and other documents. Available for PC, Mac OS, Android Tablets and iPad. IEC publications search - www.iec.ch/searchpub The advanced search enables to find IEC publications by a variety of criteria (referen

7、ce number, text, technical committee,). It also gives information on projects, replaced and withdrawn publications. IEC Just Published - webstore.iec.ch/justpublished Stay up to date on all new IEC publications. Just Published details all new publications released. Available online and also once a m

8、onth by email. Electropedia - www.electropedia.org The worlds leading online dictionary of electronic and electrical terms containing more than 30 000 terms and definitions in English and French, with equivalent terms in 14 additional languages. Also known as the International Electrotechnical Vocab

9、ulary (IEV) online. IEC Glossary - std.iec.ch/glossary More than 55 000 electrotechnical terminology entries in English and French extracted from the Terms and Definitions clause of IEC publications issued since 2002. Some entries have been collected from earlier publications of IEC TC 37, 77, 86 an

10、d CISPR. IEC Customer Service Centre - webstore.iec.ch/csc If you wish to give us your feedback on this publication or need further assistance, please contact the Customer Service Centre: csciec.ch. IEC 61966-12-2 Edition 1.0 2014-04 INTERNATIONAL STANDARD Multimedia systems and equipment Colour mea

11、surement and management Part 12-2: Simple metadata format for identification of colour gamut INTERNATIONAL ELECTROTECHNICAL COMMISSION Q ICS 17.180.20; 33.160 PRICE CODE ISBN 978-2-8322-1481-7 Registered trademark of the International Electrotechnical Commission Warning! Make sure that you obtained

12、this publication from an authorized distributor. 2 IEC 61966-12-2:2014 IEC 2014 CONTENTS FOREWORD . 3 INTRODUCTION . 5 1 Scope 6 2 Normative references 6 3 Terms and definitions 6 4 Simple description of gamut. 7 5 Relationship with IEC 61966-12-1 9 Annex A (informative) Conversion from IEC 61966-12

13、-2 to IEC 61966-12-1 simple profile 11 Annex B (informative) Example of simple metadata format and conversion to IEC 61966-12-1 simple profile . 13 Bibliography 17 Figure 1 The colour gamut of additive three primary colours type display . 8 Figure 2 IEC 61966-12-1 full/medium profile 9 Figure 3 IEC

14、61966-12-1 simple profile and IEC 61966-12-2 9 Table 1 Simple metadata format for identification of colour gamut 7 Table 2 Differences of IEC 61966-12-1 simple profile and IEC 61966-12-2 10 Table B.1 Colour gamut for IEC 61966-2-5 opRGB 13 Table B.2 Encoded simple metadata format . 13 Table B.3 Conv

15、ersion result to CIE-XYZ values for five colour vertices 14 Table B.4 Example for the header 14 Table B.5 Example for the header of description of gamut geometry 14 Table B.6 Example of definition of vertices 15 Table B.7 Example of encoded colour space coordinates for vertices 15 IEC 61966-12-2:201

16、4 IEC 2014 3 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ MULTIMEDIA SYSTEMS AND EQUIPMENT COLOUR MEASUREMENT AND MANAGEMENT Part 12-2: Simple metadata format for identification of colour gamut FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardiza

17、tion comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes Internati

18、onal Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in

19、this preparatory work. International, governmental and non- governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the

20、two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have

21、the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misint

22、erpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding nationa

23、l or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services car

24、ried out by independent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Co

25、mmittees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn

26、 to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not b

27、e held responsible for identifying any or all such patent rights. International Standard IEC 61966-12-2 has been prepared by technical area 2: Colour measurement and management, of IEC technical committee 100: Audio, video and multimedia systems and equipment. The text of this standard is based on t

28、he following documents: CDV Report on voting 100/2129/CDV 100/2276/RVC Full information on the voting for the approval of this standard can be found in the report on voting indicated in the above table. 4 IEC 61966-12-2:2014 IEC 2014 A list of alll parts of the IEC 61966 series, published under the

29、general title Multimedia systems and equipment Colour measurement and management, can be found on the IEC website. This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. The committee has decided that the contents of this publication will remain unchanged until the stab

30、ility date indicated on the IEC web site under “http:/webstore.iec.ch“ in the data related to the specific publication. At this date, the publication will be reconfirmed, withdrawn, replaced by a revised edition, or amended. A bilingual version of this publication may be issued at a later date. IEC

31、61966-12-2:2014 IEC 2014 5 INTRODUCTION New technologies in capturing and displaying wide-gamut colour images enable a new market of wide-gamut video colour content creation. Recent video standards for wide gamut colour space encoding such as IEC 61966-2-4 (xvYCC) were developed in order to be able

32、to distribute content with a colour gamut that is extended with respect to classical colour gamuts such as defined by standards ITU-R BT.601 (standard definition television) and ITU-R BT.709 (high definition television). With the increasing popularity of wide gamut and high dynamic range contents an

33、d displays, the variety of colour gamuts of displays is expected to increase. This issue can be an obstacle to adoption of wide-gamut video colour contents in professional content creation since the compatibility of the contents to the employed displays, as well as the compatibility among different

34、displays, is not ensured. The term display includes here any video colour reproduction equipment, such as direct view displays and projectors. Thanks to improvements in technology, the variety of colour gamuts and colour reproduction capacities of displays increases while the colour gamut and the co

35、lour encoding rules of existing colour space encoding standards are fixed. To address this issue, IEC 61966-12-1: “Metadata for identification of colour gamut (Gamut ID)” specifies a colour gamut metadata scheme for video systems including information for colour reproduction. This metadata can apply

36、 to video content or displays. More specifically, improvements can be achieved if the wide-gamut colour content is created with the knowledge of the display colour gamut as well as if the colour reproduction in the display is done with the knowledge of the colour gamut of the pictorial content. IEC

37、61966-12-1 has the capability to describe arbitrary 3D colour gamuts in a given colour space and include the full/medium profile for professional use and the simple profile for consumer use with easier product implementation. This approach is effective, but some ambiguities can occur in practical us

38、e. For example, if typical CE devices are able to decode the simple profile only, due to CPU and software limitations. In this case, even if a sender device and a receiver device are “based on IEC 61966-12-1 standard“, a) the receiver device cannot handle the Gamut ID of incoming contents, if the se

39、nder device sends only full or medium profile. b) the sender device should convert a full profile to a simple one for CE-devices, if the receiver can receive the simple profile only. But the conversion is not possible for all the cases. Therefore, a simple Gamut ID profile standard of this standard

40、has been developed to address this problem. For published parts of this series of standards refer to the IEC website. 6 IEC 61966-12-2:2014 IEC 2014 MULTIMEDIA SYSTEMS AND EQUIPMENT COLOUR MEASUREMENT AND MANAGEMENT Part 12-2: Simple metadata format for identification of colour gamut 1 Scope This pa

41、rt of IEC 61966 specifies the colour gamut metadata format for video systems intended for use in CE (Consumer Electronics) devices. The metadata specified in this part of IEC 61966 is limited to the gamut description of additive three primary colours type displays whose white and black points have t

42、he same chromaticity. It is fundamentally based on the conventional VESA-EDID format. When associated with content, the simple metadata format defines the gamut for which the content was created. It can be used by the display for controlled colour reproduction even if the displays colour gamut is di

43、fferent from that of the content. When associated with a display, the simple metadata format defines the display colour gamut. It can be used during content creation to enable improved colour reproduction. This standard provides the simplest, but unambiguous solution for typical CE devices that are

44、based on colour gamut information communication. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest editio

45、n of the referenced document (including any amendments) applies. IEC 60050-845, International Electrotechnical Vocabulary Part 845: Lighting IEC 61966-12-1:2011, Multimedia systems and equipment Colour measurement and management Part 12-1: Metadata for identification of colour gamut (Gamut ID) IEC 6

46、1966-2-4, Multimedia systems and equipment Colour measurement and management Part 2-4: Colour management Extended-gamut YCC colour space for video applications xvYCC ISO 15076-1:2005, Image technology colour management Architecture, profile format and data structure Part 1: Based on ICC.2010 3 Terms

47、 and definitions For the purposes of this document, the terms and definitions given in IEC 60050-845, as well as the following apply. 3.1 content set of video signals in production, post-production or consumption IEC 61966-12-2:2014 IEC 2014 7 3.2 colour gamut range of colours achievable on a given

48、colour reproduction medium (or present in an image of that medium) under a given set of viewing conditions Note 1 to entry: It is a volume in colour space. 3.3 gamut mapping mapping of the colour-space coordinates of the elements of a source image to colour-space coordinates of the elements of a rep

49、roduction to compensate for differences in the source and output medium colour gamut capability 4 Simple description of gamut Additive three primary colours gamut can be specified by four combinations of CIE-xy chromaticity values of red, green, blue and white. The gamut is assumed to have the characteristic that combining equal amounts of the three primaries (red, green, blue) produces the chromaticity of white. These values can be encoded according to the gamut C