IEC 60169-28-1994 Radio-frequency connectors part 28 radio-frequency coaxial connectors with inner diameter of outer conductor of 5 60 mm (0 220 in) with snap-o.pdf

《IEC 60169-28-1994 Radio-frequency connectors part 28 radio-frequency coaxial connectors with inner diameter of outer conductor of 5 60 mm (0 220 in) with snap-o.pdf》由会员分享，可在线阅读，更多相关《IEC 60169-28-1994 Radio-frequency connectors part 28 radio-frequency coaxial connectors with inner diameter of outer conductor of 5 60 mm (0 220 in) with snap-o.pdf（20页珍藏版）》请在麦多课文档分享上搜索。

1、NORME CE1 INTERNATIONALE INTERNATIONAL STANDARD IEC 169128 Premire dition First edition 1994-02 Connecteurs pour frquences radiolectriques - Partie 28: Connecteurs coaxiaux pour frquences radiolectriques avec diamtre intrieur du conducteur extrieur de 5,60 mm (0,220 in) verrouillage encliquetage - I

2、mpdance caractristique 75 ohms Radio-frequency connectors - Part 28: Radio-f requency coaxial con nectors with inner diameter of outer conductor of 5,60 mm (0,220 in) with snap-on coupling - Characteristic impedance 75 ohms Numro de rfrence Reference number CEIAEC 169-28: 1994 Numros des publication

3、s Depuis le ler janvier 1997, les publications de la CE1 sont numrotes partir de 60000. Publications consolides Les versions consolides de certaines publications de la CE1 incorporant les amendements sont disponibles. Par exemple, les numros ddition 1.0, 1.1 et 1.2 indiquent respectivement la public

4、ation de base, la publication de base incorporant lamendement 1, et la publication de base incorporant les amendements 1 et 2. Validit de la prsente publication Le contenu technique des publications de la CE1 est constamment revu par la CE1 afin quil reflte ltat actuel de la technique. Des renseigne

5、ments relatifs la date de reconfirmation de la publication sont disponibles dans le Catalogue de la CEI. Les renseignements relatifs des questions ltude et des travaux en cours entrepris par le comit technique qui a tabli cette publication, ainsi que la liste des publications tablies, se trouvent da

6、ns les documents ci- dessous: Site web, de la CEI“ Catalogue des publications de la CE1 Publi annuellement et mis jour rgulirement (Catalogue en ligne)* Disponible la fois au 4te web, de la CEI* et comme priodique imprim Bulletin de la CE1 Terminologie, symboles graphiques et littraux En ce qui conc

7、erne la terminologie gnrale, le lecteur se reportera la CE1 60050: Vocabulaire Electro- technique international (VEI). Pour les symboles graphiques, les symboles littraux et les signes dusage gnral approuvs par la CEI, le lecteur consultera la CE1 60027: Symboles littraux utiliser en lectrotechnique

8、, la CE1 6041 7: Symboles graphiques utilisables sur le matriel. Index, rele ve et compilation des feuilles individuelles, et la CE1 6061 7: Symboles graphiques pour schmas. * Voir adresse 4te web, sur la page de titre. Num be ring As from 1 January 1997 all IEC publications are issued with a design

9、ation in the 60000 series. Consolidated publications Consolidated versions of some IEC publications including amendments are available. For example, edition numbers 1.0, 1.1 and 1.2 refer, respectively, to the base publication, the base publication incorporating amendment 1 and the base publication

10、incorporating amendments 1 and 2. Validity of this publication The technical content of IEC publications is kept under constant review by the IEC, thus ensuring that the content reflects current technology. Information relating to the date of the reconfirmation of the publication is available in the

11、 IEC catalogue. Information on the subjects under consideration and work in progress undertaken by the technical committee which has prepared this publication, as well as the list of publications issued, is to be found at the following IEC sources: IEC web site“ Catalogue of IEC publications Publish

12、ed yearly with regular updates (On-line catalogue)* Available both at the IEC web site* and as a printed periodical IEC Bulletin Terminology, graphical and letter symbols For general terminology, readers are referred to I EC 60050: international Electrotechnical Vocabulary (IEV). For graphical symbo

13、ls, and letter symbols and signs approved by the IEC for general use, readers are referred to publications IEC 60027: fetter symbols to be used in electrical technology, IEC 60417: Graphical symbols for use on equipment. Index, survey and compilation of the single sheets and IEC 60617: Graphical sym

14、bols for diagrams. * See web site address on title page. NORME I NTE RN AT I ON ALE INTERNATIONAL STANDARD CE1 IEC 169128 Premire dition First edition 1994-02 Connecteurs pour frquences radiolectriques - Partie 28: Connecteurs coaxiaux pour frquences radiolectriques avec diamtre intrieur du conducte

15、ur extrieur de 5,60 mm (0,220 in) verrouillage encliquetage - Impdance caractristique 75 ohms Radio-frequency connectors - Part 28: Radio-frequency coaxial connectors with inner diameter of outer conductor of 5,60 mm (0,220 in) with snap-on coupling - Characteristic impedance 75 ohms 0 CE1 1994 Droi

16、ts de reproduction rservs - CopyrigM - all rights resewed Aucune partie de cette publication ne peut any IEC National Committee interested in the subject dealt with may participate in thi preparatory work. International. governmental and non-gavemmental organizations liaising with the IEC also parti

17、cipate in this preparation. The IEC cdlaborates closely with the International Organization for Standardization (ISO) in accordance with condons determined by agreement between the two organizations. 2) The formal decisions or agreements of the IEC on technical matters, prepared by technical committ

18、ees on which all the National Comrnitteec having a spedal interest therein are represented, express, as nearly as posible, an international consensus of opinion on the subjects dealt with. 3) They have the form of recommendations for intemational use published in the form of standards, technical rep

19、orts or guides and they are accepted by the National Committees in that sense. 4) In order 83 promote international unification, IEC National Committees undertake to apply IEC International Standards transparently to the maximum extent possible in their national and regional standards. Any divergenc

20、e between the IEC Standard and the corresponding national or regional standard shall be dearly indicated in the latter. International Standard IEC 169-28 has been prepared by subcommittee 46D: R.F. connectors, of IEC Technical Committee 46: Cables, wires, waveguides, r.f. connectors, and accessories

21、 for communication and signalling. The text of this standard is based on the following documents: Full information on the voting for the approval of this part can be found in the reports on voting indicated in the above table. This standard shall be read in conjunction with IEC 1 169-1. -6- 169-28 O

22、 CEI:1994 CONNECTEURS POUR FRQUENCES RADIOLECTRIQUES - Partie 28: Connecteurs coaxiaux pour frquences radiolectriques avec diamtre intrieur du conducteur extrieur de 5,60 mm (0,220 in) verrouillage encliquetage - Impdance caractristique 75 ohms 1 Domaine dapplication Cette partie de la CE1 169 donne

23、 les informations de base concernant Iintermariabilit et les caractristiques des connecteurs coaxiaux miniatures avec des interfaces dilectriques en PTFE se recouvrant, pour cbles pour frquences radiolectriques flexibles et semi-rigides. Ces connecteurs peuvent tre utiliss jusqu des frquences gales

24、6 GHz. 2 Valeurs assignes et caractristiques 2.1 Caractristiques lectriques Impdance nominale Gamme de frquences - Connecteurs de classe 2 Facteur de rflexion - Connecteurs de classe 2 Types droits Types couds Types droits Typescouds . Types de montage des composants Ft souder et types pour cartes i

25、mprimes Rsistance du contact central Rsistance et continuit du conducteur extrieur Rsistance disolement Tension de tenue au niveau de la mer * Tension de tenue 20 km daltitude Tension dessai denvironnement au niveau de la mer Tension dessai denvironnement 20 km daltitude* Efficacit dcran 1 GHz 75 Q

26、Jusqu 3 GHz au moins 50*10 jusqu i GH 5019 jusqu 3 GHZ 10,20 50.25 Voir spcification particulire Non applicable I 5 mi2 Initiale 11 5 mQ Aprs conditionnement Q,5 mlR Initiale r7,5 mi2 Aprs conditionnement 2 1 Ga Initiale 2 500 MO Aprs conditionnement 13 kV ou comme limite par le cble 300 V ou comme

27、limite par le cble 500 V ou comme limite par le cble 125 V ou comme limite par le cble Ag 2 60 dB (Zt = 0,150 Q) Les valeurs des tensions sont des valeurs efficaces pour courant alternatif 50 Hz - 60 Hz, sauf prescription contraire. 169-280 IEC:1994 -7- RADIO-FREQUENCY CONNECTORS - Part 28: Radio-f

28、requency coaxial connectors with inner diameter of outer conductor 5,60 mm (0,220 in) with snap-on coupling - Characteristic impedance 75 ohms 1 scope This part of IEC 169 provides basic intermateability and performance information for miniature coaxial connectors with overlapping PTFE dielectric in

29、terfaces for use with both flexible and semi- rigid r.f. cables. The connectors are usable up to a frequency of at least 6 GHz. 2 Ratings and characteristics 2.1 Electrical Nominal impedance Frequency range - Grade 2 connectors Reflection factor - Grade 2 connectors Straight styles Right-angle style

30、s Straight styles Right-angle styles Component mounting styles Solder bucket and PCB mounting style Centre contact resistance Outer contact resistance and continuity Insulation resistance Proof voltage at sea level * Proof voltage at 20 km altitude* Environmental test voltage at sea level Environmen

31、tal test voltage at 20 km altitude Screening effectiveness at 1 GHz 75 R Up to at least 3 GHz oylo up to 1 GHz 10,20 up to 1 GHz 10,25 See detail specification Not applicable 1 5 mR Initial 51 5 mR After conditioning 9,5 msZ Initial 57,5 mR After conditioning 2 1 GQ Initial 2 500 MR After conditioni

32、ng 13 kV or as limited by the cable 300 V or as limited by the cable 500 V or as limited by the cable 125 V or as limited by the cable Ag 60 dB (Zt= 0,150 Cl) * VdtageS are r.m.c. values of a.c. at 50 Hz to 60 Hz, unless otherwise specified. -8- 169-280 CEI:1994 2.2 Caracfrisfiques mcaniques Rtentio

33、n des contacts (si applicable) Force axiale Couple Accouplement - Dsaccouplement Force axiale 2.3 Caracf&kfiques denvifonnemenf Vibrations Catgorie climatique 55/1SSI21 Etanchi (connecteurs tanches de panneau et de passage) Etanchi (connecteurs hermtiques) 10 N min. 0,02 N . m min. 8 N min. 63 Nmax. 98 m/s* (acclration 10 Hz 500 Hz Certains cbles utilisables avec ces connecteurs ont une temprature maximale admissible infrieure 155 OC 1 cm3/h max. 100kPallOkPa s Pa. cm% (5 x 1 O-5 bar . cm3/s) pression diffrentielle 100 kPa110 kPa pression diffrentielle