IEC TS 62749-2015 Assessment of power quality - Characteristics of electricity supplied by public networks《电能质量评定 公共电网供电特征》.pdf

《IEC TS 62749-2015 Assessment of power quality - Characteristics of electricity supplied by public networks《电能质量评定 公共电网供电特征》.pdf》由会员分享，可在线阅读，更多相关《IEC TS 62749-2015 Assessment of power quality - Characteristics of electricity supplied by public networks《电能质量评定 公共电网供电特征》.pdf（48页珍藏版）》请在麦多课文档分享上搜索。

1、 IEC TS 62749 Edition 1.0 2015-04 TECHNICAL SPECIFICATION Assessment of power quality Characteristics of electricity supplied by public networks IEC TS 62749:2015-04(en) colour inside THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2015 IEC, Geneva, Switzerland All rights reserved. Unless otherwis

2、e specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or IECs member National Committee in the country of the requester. If you have any questio

3、ns about IEC copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or your local IEC member National Committee for further information. IEC Central Office Tel.: +41 22 919 02 11 3, rue de Varemb Fax: +41 22 919 03 00 CH-1211 Geneva 20 in

4、foiec.ch Switzerland www.iec.ch About the IEC The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes International Standards for all electrical, electronic and related technologies. About IEC publications The technical content of IEC public

5、ations is kept under constant review by the IEC. Please make sure that you have the latest edition, a corrigenda or an amendment might have been published. IEC Catalogue - webstore.iec.ch/catalogue The stand-alone application for consulting the entire bibliographical information on IEC International

6、 Standards, Technical Specifications, Technical Reports and other documents. Available for PC, Mac OS, Android Tablets and iPad. IEC publications search - www.iec.ch/searchpub The advanced search enables to find IEC publications by a variety of criteria (reference number, text, technical committee,)

7、. It also gives information on projects, replaced and withdrawn publications. IEC Just Published - webstore.iec.ch/justpublished Stay up to date on all new IEC publications. Just Published details all new publications released. Available online and also once a month by email. Electropedia - www.elec

8、tropedia.org The worlds leading online dictionary of electronic and electrical terms containing more than 30 000 terms and definitions in English and French, with equivalent terms in 15 additional languages. Also known as the International Electrotechnical Vocabulary (IEV) online. IEC Glossary - std

9、.iec.ch/glossary More than 60 000 electrotechnical terminology entries in English and French extracted from the Terms and Definitions clause of IEC publications issued since 2002. Some entries have been collected from earlier publications of IEC TC 37, 77, 86 and CISPR. IEC Customer Service Centre -

10、 webstore.iec.ch/csc If you wish to give us your feedback on this publication or need further assistance, please contact the Customer Service Centre: csciec.ch. IEC TS 62749 Edition 1.0 2015-04 TECHNICAL SPECIFICATION Assessment of power quality Characteristics of electricity supplied by public netw

11、orks INTERNATIONAL ELECTROTECHNICAL COMMISSION ICS 17.220.99 ISBN 978-2-8322-2547-9 Registered trademark of the International Electrotechnical Commission Warning! Make sure that you obtained this publication from an authorized distributor. colour inside 2 IEC TS 62749:2015 IEC 2015 CONTENTS FOREWORD

12、 . 4 INTRODUCTION . 6 1 Scope 7 2 Normative references 8 3 Terms and definitions 9 4 Recommended values for power quality indices . 16 4.1 General . 16 4.2 Frequency deviation 16 4.3 Supply voltage deviation . 16 4.3.1 General . 16 4.3.2 Low voltage systems . 16 4.3.3 Medium voltage systems 17 4.3.4

13、 High voltage systems . 17 4.4 Voltage unbalance 18 4.5 Flicker. 18 4.6 Harmonic and interharmonic voltage . 18 4.6.1 General . 18 4.6.2 Low voltage systems . 18 4.6.3 Medium voltage systems 19 4.6.4 High voltage systems . 20 4.7 Voltage dip . 21 4.8 Voltage swell 22 4.9 Voltage interruption. 22 4.1

14、0 Mains signalling voltage 22 4.11 Rapid voltage change . 23 4.12 Transient overvoltage . 23 4.12.1 Low voltage systems . 23 4.12.2 Medium and High voltage systems . 24 5 Objectives and methods for power quality assessment 24 5.1 General . 24 5.2 Site power quality assessment 24 5.2.1 General . 24 5

15、.2.2 For continuous phenomena 25 5.2.3 For discontinuous phenomena (single event) . 26 5.3 System aspect power quality assessment . 27 5.3.1 General . 27 5.3.2 For continuous phenomena 27 5.3.3 For discontinuous phenomena (events) . 27 Annex A (informative) Examples of PROFILES for Power Quality Spe

16、cification 30 A.1 LV public distribution in European countries 30 A.2 LV, MV and HV power supply system in China 31 A.3 Example of a transmission system in Canada . 32 A.4 Examples of Profiles in Australia . 33 Annex B (informative) Example on System Aspect Continuous Disturbance Evaluation 34 Annex

17、 C (informative） Main Impact of Poor Power Quality. 35 IEC TS 62749:2015 IEC 2015 3 C.1 Harmonic distortion . 35 C.2 Voltage unbalance 35 C.3 Voltage deviation 36 C.4 Frequency deviation 36 C.5 Voltage fluctuation 36 C.6 Flicker. 36 C.7 Voltage dip (or Voltage sag) 36 C.8 Transient overvoltages 36 A

18、nnex D (informative) Power Quality Issues Related to Distributed Generation and Micro-grids 37 D.1 Voltage deviation 37 D.2 Harmonics 37 D.3 DG magnetic bias (DC current injection) . 37 D.4 Voltage fluctuation and flicker . 37 D.5 High frequency conducted disturbances 38 Annex E (informative) Method

19、s to Maintain and Improve Power Quality . 39 E.1 Voltage deviation 39 E.2 Harmonics 39 E.3 Flicker. 40 E.4 Unbalance 40 E.5 Voltage dip/swell/short time interruption . 40 Annex F (informative) Relation between Power quality and EMC . 41 Bibliography 43 Figure 1 Signal voltages recommended values in

20、percent of U Nused in public LV networks (or U cin public MV networks) 23 Figure 2 An example for illustrating voltage THD assessment result trends 26 Figure 3 An example showing information of single event assessment . 27 Figure F.1 Application points in a LV system (example) . 42 Figure F.2 Relati

21、on between disturbance levels (Schematic significance only) . 42 Table 1 Classification of electromagnetic phenomena addressed by power quality indices 8 Table 2 Flicker severity P ltrecommended values . 18 Table 3 Recommended values of individual harmonic voltages at the low voltage supply terminal

22、s for orders up to 50 given in percent of the fundamental voltage U 1. 19 Table 4 Recommended values of individual harmonic voltages at the medium voltage supply terminals for orders up to 50 given in percent of the fundamental voltage U 1. 20 Table 5 Indicative values of individual harmonic voltage

23、s at the high voltage supply terminals given in percent of the fundamental voltage U 1. 21 Table 6 Site power quality assessment methods 25 Table 7 Example of single event assessment . 27 Table 8 List of individual events measured at a single monitoring site 28 Table 9 SARFI-X indices coming out of

24、Table 8 . 28 Table 10 Magnitude duration table format . 29 Table B.1 Listing of System Power Quality Evaluation . 34 4 IEC TS 62749:2015 IEC 2015 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ ASSESSMENT OF POWER QUALITY CHARACTERISTICS OF ELECTRICITY SUPPLIED BY PUBLIC NETWORKS FOREWORD 1) The Interna

25、tional Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electro

26、nic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees;

27、 any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non- governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Stan

28、dardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has r

29、epresentation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate,

30、 IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional pu

31、blications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some a

32、reas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents incl

33、uding individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reli

34、ance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the e

35、lements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. The main task of IEC technical committees is to prepare International Standards. In exceptional circumstances, a technical committee may propose the p

36、ublication of a technical specification when the required support cannot be obtained for the publication of an International Standard, despite repeated efforts, or the subject is still under technical development or where, for any other reason, there is the future but no immediate possibility of an

37、agreement on an International Standard. Technical specifications are subject to review within three years of publication to decide whether they can be transformed into International Standards. IEC TS 62749, which is a technical specification, has been prepared by IEC technical committee 8: System as

38、pects of electrical energy supply. IEC TS 62749:2015 IEC 2015 5 The text of this technical specification is based on the following documents: DTS Report on voting 8/1363/DTS 8/1381/RVC Full information on the voting for the approval of this technical specification can be found in the report on votin

39、g indicated in the above table. This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. The committee has decided that the contents of this publication will remain unchanged until the maintenance result date indicated on the IEC web site under “http:/webstore.iec.ch“ in

40、the data related to the specific publication. At this date, the publication will be transformed into an International standard, reconfirmed, withdrawn, replaced by a revised edition, or amended. A bilingual version of this publication may be issued at a later date. IMPORTANT The colour inside logo o

41、n the cover page of this publication indicates that it contains colours which are considered to be useful for the correct understanding of its contents. Users should therefore print this document using a colour printer. 6 IEC TS 62749:2015 IEC 2015 INTRODUCTION The description of ELECTRICITY is of f

42、undamental importance within electricity supply systems. In general, its characteristics depend less on its generation than on the way in which it is transported by networks and being used by the equipment of the multiple users. Faults or other events such as short-circuit and lightning strikes occu

43、rring within users installations or public networks also disturb or degrade it. There is a need for a common set of power quality indices and measurement methods in order to allow different system operators to measure and report power quality in a consistent manner. Regarding the limits or levels of

44、 power quality, the situation differs. Historically, the electrical systems in different countries/regions have been designed in different ways to cater for national/regional variations like different geographic, climatic or commercial conditions, etc. It is thus essential that any set of internatio

45、nally agreed power quality limits or levels also recognize these differences which depends namely on the system configuration, the transfer characteristics between the different voltage levels (attenuation or amplification), the actual disturbance levels on the system, etc. Also, the level of power

46、quality is not absolute rather it depends on the price that clients are willing to pay for it. Optimizing power quality should be carried out in a cost-effective manner in that if NETWORK USERs expect power quality to be an intrinsic characteristic of the product they also want it at the lowest pric

47、e. This is why some of the objectives recommended hereafter allow for a range of values, or options, while still ensuring the coordination of disturbance levels between different parts of the system or voltage levels. Then, the requirements to be applied can be expressed by the association of the IE

48、C Power Quality framework from the normative part of this Technical Specification and PROFILES. Examples of profiles are given in Annex A. Nowadays, Smart Grid construction and massive deployment of renewable energy sources increase the complexity of power quality management. IEC TS 62749:2015 IEC 2

49、015 7 ASSESSMENT OF POWER QUALITY CHARACTERISTICS OF ELECTRICITY SUPPLIED BY PUBLIC NETWORKS 1 Scope This Technical Specification specifies the expected characteristics of electricity at the SUPPLY TERMINALS of public low, medium and high voltage, 50 Hz or 60 Hz, networks. NOTE 1 The boundaries between the various voltage levels may be different for different countries/regions. In the context of this TS, the following terms for system voltage are used: low voltage (LV) r