IEC TS 62672-1-2013 Reliability and availability evaluation of HVDC systems - Part 1 HVDC systems with line commutated converters (Edition 1.0)《高压直流输电(HVDC)系统的可靠性和可用性.第1部分 带电网换相换流器的HVDC系统》.pdf

《IEC TS 62672-1-2013 Reliability and availability evaluation of HVDC systems - Part 1 HVDC systems with line commutated converters (Edition 1.0)《高压直流输电(HVDC)系统的可靠性和可用性.第1部分 带电网换相换流器的HVDC系统》.pdf》由会员分享，可在线阅读，更多相关《IEC TS 62672-1-2013 Reliability and availability evaluation of HVDC systems - Part 1 HVDC systems with line commutated converters (Edition 1.0)《高压直流输电(HVDC)系统的可靠性和可用性.第1部分 带电网换相换流器的HVDC系统》.pdf（48页珍藏版）》请在麦多课文档分享上搜索。

1、 IEC/TS 62672-1 Edition 1.0 2013-11 TECHNICAL SPECIFICATION Reliability and availability evaluation of HVDC systems Part 1: HVDC systems with line commutated converters IEC/TS 62672-1:2013(E) THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2013 IEC, Geneva, Switzerland All rights reserved. Unless

2、otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or IECs member National Committee in the country of the requester. If you have any

3、 questions about IEC copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or your local IEC member National Committee for further information. IEC Central Office Tel.: +41 22 919 02 11 3, rue de Varemb Fax: +41 22 919 03 00 CH-1211 Gene

4、va 20 infoiec.ch Switzerland www.iec.ch About the IEC The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes International Standards for all electrical, electronic and related technologies. About IEC publications The technical content of IE

5、C publications is kept under constant review by the IEC. Please make sure that you have the latest edition, a corrigenda or an amendment might have been published. Useful links: IEC publications search - www.iec.ch/searchpub The advanced search enables you to find IEC publications by a variety of cr

6、iteria (reference number, text, technical committee,). It also gives information on projects, replaced and withdrawn publications. IEC Just Published - webstore.iec.ch/justpublished Stay up to date on all new IEC publications. Just Published details all new publications released. Available on-line a

7、nd also once a month by email. Electropedia - www.electropedia.org The worlds leading online dictionary of electronic and electrical terms containing more than 30 000 terms and definitions in English and French, with equivalent terms in additional languages. Also known as the International Electrote

8、chnical Vocabulary (IEV) on-line. Customer Service Centre - webstore.iec.ch/csc If you wish to give us your feedback on this publication or need further assistance, please contact the Customer Service Centre: csciec.ch. IEC/TS 62672-1 Edition 1.0 2013-11 TECHNICAL SPECIFICATION Reliability and avail

9、ability evaluation of HVDC systems Part 1: HVDC systems with line commutated converters INTERNATIONAL ELECTROTECHNICAL COMMISSION X ICS 29.240.01 PRICE CODE ISBN 978-2-8322-1182-3 Registered trademark of the International Electrotechnical Commission Warning! Make sure that you obtained this publicat

10、ion from an authorized distributor. 2 TS 62672-1 IEC:2013(E) CONTENTS FOREWORD . 5 1 Scope 7 2 Normative references 7 3 Terms, definitions and abbreviations . 8 3.1 Outage terms . 8 3.2 Capacity terms . 8 3.3 Outage duration terms . 9 3.4 Time categories . 9 3.5 Availability and utilization terms .

11、10 3.6 Commutation failure performance terms . 11 3.7 Abbreviations and symbols 11 4 Classification of HVDC transmission system equipment . 12 4.1 General 12 4.2 AC and auxiliary equipment (AC-E) 12 4.2.1 General 12 4.2.2 AC filter and other reactive power equipment (AC-E.F) . 13 4.2.3 AC control an

12、d protection (AC-E.CP) 13 4.2.4 Converter transformer (AC-E.TX) 13 4.2.5 Synchronous compensator (AC-E.SC) 13 4.2.6 Auxiliary equipment and auxiliary power (AC-E.AX) 13 4.2.7 Other AC switchyard equipment (AC-E.SW) 13 4.3 Valves (V) 14 4.3.1 General 14 4.3.2 Valve electrical (V.E) 14 4.3.3 Valve coo

13、ling (V.VC) 14 4.4 DC control and protection equipment (C-P) 14 4.4.1 General 14 4.4.2 Local control and protection (C-P.L) . 14 4.4.3 Master control and protection (C-P.M) 14 4.4.4 Telecommunications equipment (C-P.T) . 14 4.5 Primary DC equipment (DC-E) . 15 4.5.1 General 15 4.5.2 DC filters (DC-E

14、.F) . 15 4.5.3 DC smoothing reactors (DC-E.SR) 15 4.5.4 DC switching equipment (DC-E.SW) . 15 4.5.5 DC measuring equipment (DC-E.ME) 15 4.5.6 DC earth electrode (DC-E.GE) 15 4.5.7 DC earth electrode line (DC-E.EL) 15 4.5.8 Other DC switchyard and valve hall equipment (DC-E.O) 15 4.6 Other (O) . 16 4

15、.7 DC transmission line (TL) . 16 4.7.1 General 16 4.7.2 DC overhead transmission line (TL-OH) 16 4.7.3 DC underground/submarine cable (TL-C) 16 4.8 External (EXT) . 16 5 Classification and severity of fault events and restoration codes 16 TS 62672-1 IEC:2013(E) 3 5.1 Classification of fault events

16、16 5.2 Severity codes . 17 5.3 Restoration codes 18 6 Instructions for compilation of report 18 6.1 General 18 6.2 General instructions . 18 6.3 Instructions for Table 2 and Table 3 . 19 6.3.1 Section 1 19 6.3.2 Section 2 19 6.3.3 Sections 3, 4 and 5 . 19 6.3.4 Section 6 20 6.3.5 Section 7 20 6.4 In

17、structions for Table 4 and Table 5 . 23 6.4.1 Forced outages Table 4 . 23 6.4.2 Scheduled outages Table 5 . 23 6.5 Instructions for Table 6 25 6.6 Instructions for Table 7 26 6.7 Instructions for Table 8 26 6.8 Instructions for Table 9 27 7 Interpretation and evaluation of reports . 28 7.1 Calculati

18、on of outage duration . 28 7.2 External events 28 7.3 Protective operation . 28 7.4 Performance of special controls . 28 Annex A (informative) Outage log form and examples 30 A.1 Example of an outage log 30 A.2 Examples of application of rule f) of 6.3 scheduled outage during a forced outage . 32 A.

19、2.1 Case 1: Scheduled outage does not increase ODF or extends outage duration 32 A.2.2 Case 2: Scheduled outage increases ODF 33 A.3 Examples of application of rule g) of 6.3 second outage during an outage . 34 A.3.1 Case 1: Second outage does not increase ODF or extends outage duration 34 A.3.2 Cas

20、e 2: Second outage extends duration 35 A.3.3 Case 3: Second outage with variable ODF 36 Annex B (informative) Sample annual report 37 Bibliography 43 Figure A.1 Scheduled outage does not increase ODF or extends outage duration 32 Figure A.2 Scheduled outage increases ODF . 33 Figure A.3 Second outag

21、e does not increase ODF or extends outage duration 34 Figure A.4 Second outage extends duration . 35 Figure A.5 Second outage with variable ODF . 36 Table 1 Classification of fault events 17 Table 2 DC system performance for back-to-back systems and for two terminal systems reporting jointly (corres

22、ponding to Table 1 of Cigr TB 346:2008) . 21 4 TS 62672-1 IEC:2013(E) Table 3 DC system performance for multi-terminal systems and for stations reporting separately as part of two-terminal systems (corresponding to Table 1 M/S of Cigr TB 346:2008) . 22 Table 4 Forced outages HVDC substation (corresp

23、onding to Table 2FS of Cigr TB 346:2008) . 24 Table 5 Scheduled outages HVDC substation (corresponding to Table 2 SS of Cigr TB 346:2008) 24 Table 6 HVDC overhead line protection operations (corresponding to Table 3 of Cigr TB 346:2008). 25 Table 7 AC system faults and commutation failure starts (ba

24、ck-to-back, two terminal or multi-terminal systems) (corresponding to Table 4 of Cigr TB 346:2008) 26 Table 8 Converter unit hours and semiconductor devices failed (corresponding to Table 5 of Cigr TB 346:2008) 27 Table 9 Forced outage summary (corresponding to Table 6 of Cigr TB 346:2008) 29 Table

25、A.1 Example of an outage log. 30 Table B.1 DC system performance for two terminal systems reporting jointly . 37 Table B.2 Forced outages HVDC substation 38 Table B.3 Scheduled outages HVDC substation . 39 Table B.4 HVDC overhead line protection operations . 40 Table B.5 AC system faults and commuta

26、tion failure starts 40 Table B.6 Converter unit hours and semiconductor devices failed 41 Table B.7 Forced outage summary . 42 TS 62672-1 IEC:2013(E) 5 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ RELIABILITY AND AVAILABILITY EVALUATION OF HVDC SYSTEMS Part 1: HVDC systems with line commutated conver

27、ters FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization i

28、n the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrus

29、ted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non- governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the Interna

30、tional Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since ea

31、ch technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of I

32、EC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in th

33、eir national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assess

34、ment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employ

35、ees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the

36、publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the po

37、ssibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. The main task of IEC technical committees is to prepare International Standards. In exceptional circumstances, a technical

38、 committee may propose the publication of a technical specification when the required support cannot be obtained for the publication of an International Standard, despite repeated efforts, or the subject is still under technical development or where, for any other reason, there is the future but no

39、immediate possibility of an agreement on an International Standard. Technical specifications are subject to review within three years of publication to decide whether they can be transformed into International Standards. IEC/TS 62672-1, which is a technical specification, has been prepared by IEC te

40、chnical committee 115: High voltage direct current (HVDC) transmission for DC voltages above 100 kV. 6 TS 62672-1 IEC:2013(E) The text of this technical specification is based on the following documents: Enquiry draft Report on voting 115/68/DTS 115/75/RVC Full information on the voting for the appr

41、oval of this technical specification can be found in the report on voting indicated in the above table. This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. Annexes A and B are for information only. A list of all parts in the IEC 62672 series, published under the gene

42、ral title Reliability and availability evaluation of HVDC systems, can be found on the IEC website. The committee has decided that the contents of this publication will remain unchanged until the stability date indicated on the IEC web site under “http:/webstore.iec.ch“ in the data related to the sp

43、ecific publication. At this date, the publication will be transformed into an International standard, reconfirmed, withdrawn, replaced by a revised edition, or amended. A bilingual version of this publication may be issued at a later date. TS 62672-1 IEC:2013(E) 7 RELIABILITY AND AVAILABILITY EVALUA

44、TION OF HVDC SYSTEMS Part 1: HVDC systems with line commutated converters 1 Scope This part of IEC 62672 applies to all line-commutated high-voltage direct current (HVDC) transmission systems used for power exchange in utility systems. HVDC stations with voltage sourced converters (VSC) are not cove

45、red. In order to assess the operational performance of HVDC transmission systems, reliability and availability need to be evaluated. For this purpose the HVDC users/owners are encouraged to compile reports on an annual basis based on the recommendations given in this Technical Specification. The pur

46、pose of this part of IEC 62672 is to define a standardized reporting protocol so that data collected from different HVDC transmission systems can be compared on an equitable basis. It is recommended that such reports are sent to Cigr SC B4, “HVDC and Power Electronics” (http:/b4.cigre.org) who colle

47、cts such data and publishes a survey of HVDC systems throughout the world on a bi-annual basis. This part of IEC 62672 covers point-to-point transmission systems, back-to-back interconnections and multi-terminal transmission systems. For point-to-point systems and back-to-back interconnections, i.e.

48、 two-terminal systems, statistics are to be reported based on the total transmission capability from the sending end to the receiving end measured at a given point. If, however, the two terminals are operated by different users/owners, or are composed of equipment of different vintage or of equipmen

49、t from different suppliers, statistics can be reported on an individual station basis if so desired by those responsible for reporting. In such a case, the outage should only be reported under the originating converter station taking care not to report the same event twice. For distributed multi-terminal systems, i.e. systems with more than two terminals, statistics are to be reported separately for each converter station based on its own individual capa