IEC TR 61850-1-2013 Communication networks and systems for power utility automation - Part 1 Introduction and overview《变电所的通信网络和系统.第1部分 引言和概要》.pdf

《IEC TR 61850-1-2013 Communication networks and systems for power utility automation - Part 1 Introduction and overview《变电所的通信网络和系统.第1部分 引言和概要》.pdf》由会员分享，可在线阅读，更多相关《IEC TR 61850-1-2013 Communication networks and systems for power utility automation - Part 1 Introduction and overview《变电所的通信网络和系统.第1部分 引言和概要》.pdf（78页珍藏版）》请在麦多课文档分享上搜索。

1、 IEC/TR 61850-1 Edition 2.0 2013-03 TECHNICAL REPORT RAPPORT TECHNIQUE Communication networks and systems for power utility automation Part 1: Introduction and overview Rseaux et systmes de communication pour lautomatisation des systmes lectriques Partie 1: Introduction et prsentation IEC/TR61850-1:

2、2013 colourinsideTHIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2013 IEC, Geneva, Switzerland All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, wit

3、hout permission in writing from either IEC or IECs member National Committee in the country of the requester. If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or your local IEC member National Com

4、mittee for further information. Droits de reproduction rservs. Sauf indication contraire, aucune partie de cette publication ne peut tre reproduite ni utilise sous quelque forme que ce soit et par aucun procd, lectronique ou mcanique, y compris la photocopie et les microfilms, sans laccord crit de l

5、a CEI ou du Comit national de la CEI du pays du demandeur. Si vous avez des questions sur le copyright de la CEI ou si vous dsirez obtenir des droits supplmentaires sur cette publication, utilisez les coordonnes ci-aprs ou contactez le Comit national de la CEI de votre pays de rsidence. IEC Central

6、Office Tel.: +41 22 919 02 11 3, rue de Varemb Fax: +41 22 919 03 00 CH-1211 Geneva 20 infoiec.ch Switzerland www.iec.ch About the IEC The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes International Standards for all electrical, electr

7、onic and related technologies. About IEC publications The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the latest edition, a corrigenda or an amendment might have been published. Useful links: IEC publications search - www.iec.ch/sear

8、chpub The advanced search enables you to find IEC publications by a variety of criteria (reference number, text, technical committee,). It also gives information on projects, replaced and withdrawn publications. IEC Just Published - webstore.iec.ch/justpublished Stay up to date on all new IEC public

9、ations. Just Published details all new publications released. Available on-line and also once a month by email. Electropedia - www.electropedia.org The worlds leading online dictionary of electronic and electrical terms containing more than 30 000 terms and definitions in English and French, with eq

10、uivalent terms in additional languages. Also known as the International Electrotechnical Vocabulary (IEV) on-line. Customer Service Centre - webstore.iec.ch/csc If you wish to give us your feedback on this publication or need further assistance, please contact the Customer Service Centre: csciec.ch.

11、 A propos de la CEI La Commission Electrotechnique Internationale (CEI) est la premire organisation mondiale qui labore et publie des Normes internationales pour tout ce qui a trait llectricit, llectronique et aux technologies apparentes. A propos des publications CEI Le contenu technique des public

12、ations de la CEI est constamment revu. Veuillez vous assurer que vous possdez ldition la plus rcente, un corrigendum ou amendement peut avoir t publi. Liens utiles: Recherche de publications CEI - www.iec.ch/searchpub La recherche avance vous permet de trouver des publications CEI en utilisant diffr

13、ents critres (numro de rfrence, texte, comit dtudes,). Elle donne aussi des informations sur les projets et les publications remplaces ou retires. Just Published CEI - webstore.iec.ch/justpublished Restez inform sur les nouvelles publications de la CEI. Just Published dtaille les nouvelles publicati

14、ons parues. Disponible en ligne et aussi une fois par mois par email. Electropedia - www.electropedia.org Le premier dictionnaire en ligne au monde de termes lectroniques et lectriques. Il contient plus de 30 000 termes et dfinitions en anglais et en franais, ainsi que les termes quivalents dans les

15、 langues additionnelles. Egalement appel Vocabulaire Electrotechnique International (VEI) en ligne. Service Clients - webstore.iec.ch/csc Si vous dsirez nous donner des commentaires sur cette publication ou si vous avez des questions contactez-nous: csciec.ch. IEC/TR 61850-1 Edition 2.0 2013-03 TECH

16、NICAL REPORT RAPPORT TECHNIQUE Communication networks and systems for power utility automation Part 1: Introduction and overview Rseaux et systmes de communication pour lautomatisation des systmes lectriques Partie 1: Introduction et prsentation INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION E

17、LECTROTECHNIQUE INTERNATIONALE W ICS 33.200 PRICE CODE CODE PRIX ISBN 978-2-83220-686-7 Registered trademark of the International Electrotechnical Commission Marque dpose de la Commission Electrotechnique Internationale Warning! Make sure that you obtained this publication from an authorized distrib

18、utor. Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agr. colourinside 2 TR 61850-1 IEC:2013 CONTENTS FOREWORD . 4 INTRODUCTION . 6 1 Scope . 7 2 Normative references . 7 3 Terms, definitions and abbreviations 9 3.1 Terms and definitions 9 3.2 Abbreviated

19、 terms . 11 4 Objectives 12 5 Approach of the IEC 61850 standard 13 5.1 Scope of application 13 5.2 IEC 61850 within the IEC Power Utility control system reference architecture . 14 5.3 IEC 61850 within Smart Grid reference architecture 15 5.4 Standardization approach 15 5.5 How to cope with fast in

20、novation of communication technology . 16 5.6 Representation of functions and communication interfaces 16 5.7 Requirements for a physical communication system 20 6 Content of the IEC 61850 series . 20 6.1 IEC 61850 general requirements (parts 1 to 5) 20 6.2 Three pillars of interoperability and conf

21、ormance testing (Part 6 and above) . 21 6.3 Understanding the structure of the IEC 61850 documentation . 22 6.4 IEC 61850 data modelling . 24 6.4.1 Main principle (explained in IEC 61850-7-1) 24 6.4.2 Standard name space introduction . 25 6.4.3 Name space extension 26 6.5 IEC 61850 communication ser

22、vices . 26 6.6 IEC 61850 SCL language 28 6.7 IEC 61850 data and communication security . 29 6.8 IEC 61850 conformance testing . 29 6.9 UCA/IEC 61850 international users group . 30 6.10 IEC 61850 maintenance 30 6.11 Quality assurance process 30 7 IEC 61850 system life cycle 31 7.1 Reason for inclusio

23、n 31 7.2 Engineering-tools and parameters . 31 7.3 Main tools and configuration data flows . 32 7.4 Quality and life-cycle management 32 7.5 General requirements 32 Figure 1 Scope of application of IEC 61850 . 14 Figure 2 Power utility control system reference architecture (IEC 62357) . 15 Figure 3

24、IEC 61850 specifying approach 16 Figure 4 Interface model within substation and between substations 17 Figure 5 Relationship between functions, logical nodes, and physical nodes (examples) 19 Figure 6 Links between IEC 61850 parts 22 TR 61850-1 IEC:2013 3 Figure 7 IEC 61850 Data modelling 24 Figure

25、8 Basic reference model 28 Figure 9 Exchange of system parameters 31 4 TR 61850-1 IEC:2013 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ COMMUNICATION NETWORKS AND SYSTEMS FOR POWER UTILITY AUTOMATION Part 1: Introduction and overview FOREWORD 1) The International Electrotechnical Commission (IEC) is

26、a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to o

27、ther activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in th

28、e subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditio

29、ns determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC Nationa

30、l Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way i

31、n which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Pu

32、blication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC

33、is not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its t

34、echnical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other

35、IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the su

36、bject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. The main task of IEC technical committees is to prepare International Standards. However, a technical committee may propose the publication of a technical report when it has collected data of a d

37、ifferent kind from that which is normally published as an International Standard, for example “state of the art“. IEC 61850-1, which is a technical report, has been prepared by IEC technical committee 57: Power systems management and associated information exchange. This second edition cancels and r

38、eplaces the first edition published in 2003. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: Extended application scope of the IEC 61850 standard for the power quality domain; for statistical and h

39、istorical data; TR 61850-1 IEC:2013 5 for distributed generation monitoring and automation purpose; for feeder automation purpose; for substation to substation communication; for monitoring functions according to IEC 62271. Smart grid considerations. Extensions (and provisions for extensions) of the

40、 documentation system relating to IEC 61850, especially with part 7-5xx (Application guides) and part 90-xx (Technical report and guidelines). The text of this technical report is based on the following documents: Enquiry draft Report on voting 57/1233/DTR 57/1304/RVC Full information on the voting

41、for the approval of this technical report can be found in the report on voting indicated in the above table. This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. A list of all parts in the IEC 61850 series, published under the general title Communication networks and

42、systems for power utility automation, can be found on the IEC website. The committee has decided that the contents of this publication will remain unchanged until the stability date indicated on the IEC web site under “http:/webstore.iec.ch“ in the data related to the specific publication. At this d

43、ate, the publication will be reconfirmed, withdrawn, replaced by a revised edition, or amended. IMPORTANT The colour inside logo on the cover page of this publication indicates that it contains colours which are considered to be useful for the correct understanding of its contents. Users should ther

44、efore print this document using a colour printer. 6 TR 61850-1 IEC:2013 INTRODUCTION IEC 61850 consists of the following parts, under the general title Communication networks and systems for power utility automation (all parts may have not been published yet). Part 1: Introduction and overviewPart 2

45、: Glossary Part 3: General requirements Part 4: System and project management Part 5: Communication requirements for functions and device models Part 6: Configuration description language for communication in electrical substations related to IEDsPart 7-1: Basic communication structure Principles an

46、d models Part 7-2: Basic communication structure Abstract communication service interface (ACSI)Part 7-3: Basic communication structure Common data classes Part 7-4: Basic communication structure Compatible logical node classes and data classes Part 7-410: Hydroelectric power plants Communication fo

47、r monitoring and control Part 7-420: Basic communication structure Distributed energy resources logical nodes Part 7-5: IEC 61850 Modelling concepts1Part 7-500: Use of logical nodes to model functions of a substation automation system1Part 7-510: Use of logical nodes to model functions of a hydro po

48、wer plant Part 7-520: Use of logical nodes to model functions of distributed energy resources1Part 8-1: Specific communication service mapping (SCSM) Mappings to MMS (ISO 9506-1 and ISO 9506-2) and to ISO/IEC 8802-3Part 80-1: Guideline to exchange information from a CDC based data model using IEC 60

49、870-5-101/104 Part 9-2: Specific communication service mapping (SCSM) Sampled values over ISO/IEC 8802-3 Part 90-1: Use of IEC 61850 for the communication between substations Part 90-2: Using IEC 61850 for the communication between substations and control centres1Part 90-3: Using IEC 61850 for condition monitoring1Part 90-4: Network Engineering Guidelines - Technical report1Part 90-5: Using IE