IEC 62625-1-2013 Electronic railway equipment - On board driving data recording system - Part 1 System specification《电子铁路设备 车载驾驶数据记录系统 第1部分 系统规范》.pdf

《IEC 62625-1-2013 Electronic railway equipment - On board driving data recording system - Part 1 System specification《电子铁路设备 车载驾驶数据记录系统 第1部分 系统规范》.pdf》由会员分享，可在线阅读，更多相关《IEC 62625-1-2013 Electronic railway equipment - On board driving data recording system - Part 1 System specification《电子铁路设备 车载驾驶数据记录系统 第1部分 系统规范》.pdf（76页珍藏版）》请在麦多课文档分享上搜索。

1、 IEC 62625-1 Edition 1.0 2013-09 INTERNATIONAL STANDARD NORME INTERNATIONALE Electronic railway equipment On board driving data recording system Part 1: System specification Matriel lectronique ferroviaire Systme embarqu denregistrement de donnes de conduite Partie 1: Spcification du systme IEC62625

2、-1:2013 colourinsideTHIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2013 IEC, Geneva, Switzerland All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm,

3、without permission in writing from either IEC or IECs member National Committee in the country of the requester. If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or your local IEC member National

4、Committee for further information. Droits de reproduction rservs. Sauf indication contraire, aucune partie de cette publication ne peut tre reproduite ni utilise sous quelque forme que ce soit et par aucun procd, lectronique ou mcanique, y compris la photocopie et les microfilms, sans laccord crit d

5、e la CEI ou du Comit national de la CEI du pays du demandeur. Si vous avez des questions sur le copyright de la CEI ou si vous dsirez obtenir des droits supplmentaires sur cette publication, utilisez les coordonnes ci-aprs ou contactez le Comit national de la CEI de votre pays de rsidence. IEC Centr

6、al Office Tel.: +41 22 919 02 11 3, rue de Varemb Fax: +41 22 919 03 00 CH-1211 Geneva 20 infoiec.ch Switzerland www.iec.ch About the IEC The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes International Standards for all electrical, ele

7、ctronic and related technologies. About IEC publications The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the latest edition, a corrigenda or an amendment might have been published. Useful links: IEC publications search - www.iec.ch/s

8、earchpub The advanced search enables you to find IEC publications by a variety of criteria (reference number, text, technical committee,). It also gives information on projects, replaced and withdrawn publications. IEC Just Published - webstore.iec.ch/justpublished Stay up to date on all new IEC pub

9、lications. Just Published details all new publications released. Available on-line and also once a month by email. Electropedia - www.electropedia.org The worlds leading online dictionary of electronic and electrical terms containing more than 30 000 terms and definitions in English and French, with

10、 equivalent terms in additional languages. Also known as the International Electrotechnical Vocabulary (IEV) on-line. Customer Service Centre - webstore.iec.ch/csc If you wish to give us your feedback on this publication or need further assistance, please contact the Customer Service Centre: csciec.

11、ch. A propos de la CEI La Commission Electrotechnique Internationale (CEI) est la premire organisation mondiale qui labore et publie des Normes internationales pour tout ce qui a trait llectricit, llectronique et aux technologies apparentes. A propos des publications CEI Le contenu technique des pub

12、lications de la CEI est constamment revu. Veuillez vous assurer que vous possdez ldition la plus rcente, un corrigendum ou amendement peut avoir t publi. Liens utiles: Recherche de publications CEI - www.iec.ch/searchpub La recherche avance vous permet de trouver des publications CEI en utilisant di

13、ffrents critres (numro de rfrence, texte, comit dtudes,). Elle donne aussi des informations sur les projets et les publications remplaces ou retires. Just Published CEI - webstore.iec.ch/justpublished Restez inform sur les nouvelles publications de la CEI. Just Published dtaille les nouvelles public

14、ations parues. Disponible en ligne et aussi une fois par mois par email. Electropedia - www.electropedia.org Le premier dictionnaire en ligne au monde de termes lectroniques et lectriques. Il contient plus de 30 000 termes et dfinitions en anglais et en franais, ainsi que les termes quivalents dans

15、les langues additionnelles. Egalement appel Vocabulaire Electrotechnique International (VEI) en ligne. Service Clients - webstore.iec.ch/csc Si vous dsirez nous donner des commentaires sur cette publication ou si vous avez des questions contactez-nous: csciec.ch. IEC 62625-1 Edition 1.0 2013-09 INTE

16、RNATIONAL STANDARD NORME INTERNATIONALE Electronic railway equipment On board driving data recording system Part 1: System specification Matriel lectronique ferroviaire Systme embarqu denregistrement de donnes de conduite Partie 1: Spcification du systme INTERNATIONAL ELECTROTECHNICAL COMMISSION COM

17、MISSION ELECTROTECHNIQUE INTERNATIONALE W ICS 45.060 PRICE CODE CODE PRIX ISBN 978-2-8322-1093-2 Registered trademark of the International Electrotechnical Commission Marque dpose de la Commission Electrotechnique Internationale Warning! Make sure that you obtained this publication from an authorize

18、d distributor. Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agr. colourinside 2 62625-1 IEC:2013 CONTENTS FOREWORD . 3 INTRODUCTION . 5 1 Scope . 6 2 Normative references 6 3 Terms, definitions, abbreviations, acronyms, and conventions . 7 3.1 Terms and

19、 definitions 7 3.2 Abbreviations and acronyms 8 3.3 Conventions 8 3.3.1 Base of numeric values 8 3.3.2 Naming conventions . 9 4 Requirements . 9 4.1 General . 9 4.2 Functional requirements 9 4.2.1 Record train data . 9 4.2.2 Ensure on board protection of recorded data 9 4.2.3 Ensure retrieval of rec

20、orded data . 10 4.2.4 Enable recorded data analysis . 10 4.2.5 Optional functions 11 4.3 System requirements . 11 4.3.1 On board driving data recording system . 11 4.3.2 Optional modes 18 4.4 Use cases . 18 5 Conformity statement 18 Annex A (informative) Italian use case 19 Annex B (informative) Jap

21、anese use case 23 Annex C (informative) German use case 25 Annex D (informative) Chinese use case 26 Annex E (informative) Functional breakdown structure Overview (extract from EN 15380-4) . 27 Annex F (informative) Check list of monitored and recorded data 30 Bibliography 34 Figure 1 ODDRS modes .

22、12 Figure 2 ODDRS optional modes 18 Figure A.1 SCMT and the related subsystems and devices . 20 Figure A.2 Structure of DIS remote servers and central computing systems 21 Figure A.3 Example of DIS data analysis 22 Table 1 Parameter values of the protection capability . 14 Table 2 Minimum recorded d

23、ata list 15 Table 3 ODDR Unit input requirements . 17 Table E.1 ODDRS allocation in EN 15380-4 29 Table F.1 Recorded data features 31 62625-1 IEC:2013 3 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ ELECTRONIC RAILWAY EQUIPMENT ON BOARD DRIVING DATA RECORDING SYSTEM Part 1: System specification FOREWO

24、RD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the elect

25、rical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to tech

26、nical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organ

27、ization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical

28、 committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publicati

29、ons is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national

30、 and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment service

31、s and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servant

32、s or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication,

33、 use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility th

34、at some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 62625-1 has been prepared by IEC technical committee 9: Electrical equipment and systems for railways. The

35、text of this standard is based on the following documents: FDIS Report on voting 9/1820/FDIS 9/1844/RVD Full information on the voting for the approval of this standard can be found in the report on voting indicated in the above table. This publication has been drafted in accordance with the ISO/IEC

36、 Directives, Part 2. 4 62625-1 IEC:2013 A list of all parts in the IEC 62625 series, published under the general title Electronic railway equipment On board driving data recording system, can be found on the IEC website. The committee has decided that the contents of this publication will remain unc

37、hanged until the stability date indicated on the IEC web site under “http:/webstore.iec.ch“ in the data related to the specific publication. At this date, the publication will be reconfirmed, withdrawn, replaced by a revised edition, or amended. IMPORTANT The colour inside logo on the cover page of

38、this publication indicates that it contains colours which are considered to be useful for the correct understanding of its contents. Users should therefore print this document using a colour printer. 62625-1 IEC:2013 5 INTRODUCTION In the railway market over the last decade, the demand for event rec

39、orders onboard of trains, metros and trams, has continuously increased. The operators are asking for more and more recorders beyond the simple recording of speed, distance and elapsed time. Consequently, many national safety authorities in many countries around the world require the installation of

40、on board event recording system. Herein some examples are listed: In Japan, the Ministry of Land, Infrastructure and Transport revised “Shorei (The Ministerial regulation of Japan)“ in 2006 for implementing juridical recorder. This regulation requires the railway authorities having constant operatio

41、nal requirements to install juridical recorders. In the USA, the Federal Railroad Administration issued in 2005 the “Final Rule 49 CFR Part 229”. The rule requires that the leading locomotives of all the USA trains are equipped with compliant event recorders. In the UK, the regulation GM/RT 2472 req

42、uires that the majority of trains operating on the network rail controlled by infrastructure are fitted with a compliant on train data recorder. In Europe, the technical specifications for interoperability for the control-command system and for Operation require the implementation of a Juridical Rec

43、ording Unit when running on the trans european network (TEN) (Directive 2008/57/EC of the European parliament and of the council). Today, it is necessary to set a common specification that can be referred to by the regulations issued by each national safety authority to harmonize these requirements,

44、 to simplify the rolling stock design and to ensure a cost effective implementation. The aim of this standard is to fulfil this target. In addition to the usual benefits of standardization for the railway stakeholders (e.g. cost reduction), this standard has the following benefit: Achievement of a s

45、pecification of a worldwide juridical event recorder that respects the minimum requirements necessary for the interoperability of trains crossing the borders of countries around the world (e.g. Europe, Asia, USA/Canada). The goals of the on board driving data recording system are to enable the check

46、ing of train operation according to the driving rules through recording the events of train operation. According to national laws, this checking can be used for enquiry after an accident or incident or for the regular monitoring of the drivers ability and qualification to operate the train. 6 62625-

47、1 IEC:2013 ELECTRONIC RAILWAY EQUIPMENT ON BOARD DRIVING DATA RECORDING SYSTEM Part 1: System specification 1 Scope This part of IEC 62625 covers the specification of an on board driving data recording system for the purpose of recording data about the operation of the train. The data refers both to

48、 the driver behaviour and the on board systems behaviour to support systematic safety monitoring as a means of preventing incidents and accidents. The data is recorded in a way that is suitable for identifying cause and where possible consequence, such that the data is suitable: for investigative us

49、e in case of accidents and incidents; to monitor the appropriate actions of drivers. The conformance test procedure will be covered by a future standard in the IEC 62625 series. This standard specifies the requirements for a universal recording system that is applicable to all types of rail vehicles. Requirements and responsibilities for the management and retention of the data to ensure