IEC 62149-2-2014 Fibre optic active components and devices - Performance standard - Part 2 850 nm discrete vertical cavity surface emitting laser devices《光纤有源元件及器件的性能标准.第2部分 850 nm离散垂直空穴表面发射激光器件》.pdf

《IEC 62149-2-2014 Fibre optic active components and devices - Performance standard - Part 2 850 nm discrete vertical cavity surface emitting laser devices《光纤有源元件及器件的性能标准.第2部分 850 nm离散垂直空穴表面发射激光器件》.pdf》由会员分享，可在线阅读，更多相关《IEC 62149-2-2014 Fibre optic active components and devices - Performance standard - Part 2 850 nm discrete vertical cavity surface emitting laser devices《光纤有源元件及器件的性能标准.第2部分 850 nm离散垂直空穴表面发射激光器件》.pdf（44页珍藏版）》请在麦多课文档分享上搜索。

1、 IEC 62149-2 Edition 2.0 2014-05 INTERNATIONAL STANDARD NORME INTERNATIONALE Fibre optic active components and devices Performance standards Part 2: 850 nm discrete vertical cavity surface emitting laser devices Composants et dispositifs actifs fibres optiques Normes de performances Partie 2: Dispos

2、itifs discrets laser 850 nm cavit verticale mettant en surface IEC 62149-2:2014-05(en-fr) THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2014 IEC, Geneva, Switzerland All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any m

3、eans, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or IECs member National Committee in the country of the requester. If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publicatio

4、n, please contact the address below or your local IEC member National Committee for further information. Droits de reproduction rservs. Sauf indication contraire, aucune partie de cette publication ne peut tre reproduite ni utilise sous quelque forme que ce soit et par aucun procd, lectronique ou mc

5、anique, y compris la photocopie et les microfilms, sans laccord crit de lIEC ou du Comit national de lIEC du pays du demandeur. Si vous avez des questions sur le copyright de lIEC ou si vous dsirez obtenir des droits supplmentaires sur cette publication, utilisez les coordonnes ci-aprs ou contactez

6、le Comit national de lIEC de votre pays de rsidence. IEC Central Office Tel.: +41 22 919 02 11 3, rue de Varemb Fax: +41 22 919 03 00 CH-1211 Geneva 20 infoiec.ch Switzerland www.iec.ch About the IEC The International Electrotechnical Commission (IEC) is the leading global organization that prepares

7、 and publishes International Standards for all electrical, electronic and related technologies. About IEC publications The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the latest edition, a corrigenda or an amendment might have been p

8、ublished. IEC Catalogue - webstore.iec.ch/catalogue The stand-alone application for consulting the entire bibliographical information on IEC International Standards, Technical Specifications, Technical Reports and other documents. Available for PC, Mac OS, Android Tablets and iPad. IEC publications

9、search - www.iec.ch/searchpub The advanced search enables to find IEC publications by a variety of criteria (reference number, text, technical committee,). It also gives information on projects, replaced and withdrawn publications. IEC Just Published - webstore.iec.ch/justpublished Stay up to date o

10、n all new IEC publications. Just Published details all new publications released. Available online and also once a month by email. Electropedia - www.electropedia.org The worlds leading online dictionary of electronic and electrical terms containing more than 30 000 terms and definitions in English

11、and French, with equivalent terms in 14 additional languages. Also known as the International Electrotechnical Vocabulary (IEV) online. IEC Glossary - std.iec.ch/glossary More than 55 000 electrotechnical terminology entries in English and French extracted from the Terms and Definitions clause of IE

12、C publications issued since 2002. Some entries have been collected from earlier publications of IEC TC 37, 77, 86 and CISPR. IEC Customer Service Centre - webstore.iec.ch/csc If you wish to give us your feedback on this publication or need further assistance, please contact the Customer Service Cent

13、re: csciec.ch. A propos de lIEC La Commission Electrotechnique Internationale (IEC) est la premire organisation mondiale qui labore et publie des Normes internationales pour tout ce qui a trait llectricit, llectronique et aux technologies apparentes. A propos des publications IEC Le contenu techniqu

14、e des publications IEC est constamment revu. Veuillez vous assurer que vous possdez ldition la plus rcente, un corrigendum ou amendement peut avoir t publi. Catalogue IEC - webstore.iec.ch/catalogue Application autonome pour consulter tous les renseignements bibliographiques sur les Normes internati

15、onales, Spcifications techniques, Rapports techniques et autres documents de lIEC. Disponible pour PC, Mac OS, tablettes Android et iPad. Recherche de publications IEC - www.iec.ch/searchpub La recherche avance permet de trouver des publications IEC en utilisant diffrents critres (numro de rfrence,

16、texte, comit dtudes,). Elle donne aussi des informations sur les projets et les publications remplaces ou retires. IEC Just Published - webstore.iec.ch/justpublished Restez inform sur les nouvelles publications IEC. Just Published dtaille les nouvelles publications parues. Disponible en ligne et aus

17、si une fois par mois par email. Electropedia - www.electropedia.org Le premier dictionnaire en ligne de termes lectroniques et lectriques. Il contient plus de 30 000 termes et dfinitions en anglais et en franais, ainsi que les termes quivalents dans 14 langues additionnelles. Egalement appel Vocabul

18、aire Electrotechnique International (IEV) en ligne. Glossaire IEC - std.iec.ch/glossary Plus de 55 000 entres terminologiques lectrotechniques, en anglais et en franais, extraites des articles Termes et Dfinitions des publications IEC parues depuis 2002. Plus certaines entres antrieures extraites de

19、s publications des CE 37, 77, 86 et CISPR de lIEC. Service Clients - webstore.iec.ch/csc Si vous dsirez nous donner des commentaires sur cette publication ou si vous avez des questions contactez-nous: csciec.ch. IEC 62149-2 Edition 2.0 2014-05 INTERNATIONAL STANDARD NORME INTERNATIONALE Fibre optic

20、active components and devices Performance standards Part 2: 850 nm discrete vertical cavity surface emitting laser devices Composants et dispositifs actifs fibres optiques Normes de performances Partie 2: Dispositifs discrets laser 850 nm cavit verticale mettant en surface INTERNATIONAL ELECTROTECHN

21、ICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE R ICS 33.180.20 PRICE CODE CODE PRIX ISBN 978-2-8322-1603-3 Registered trademark of the International Electrotechnical Commission Marque dpose de la Commission Electrotechnique Internationale Warning! Make sure that you obtained this publica

22、tion from an authorized distributor. Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agr. 2 IEC 62149-2:2014 IEC 2014 CONTENTS FOREWORD . 4 INTRODUCTION . 6 1 Scope 7 2 Normative references 7 3 Terms, definitions, symbols and abbreviations . 8 3.1 Terms an

23、d definitions 8 3.2 Symbols and abbreviations . 9 4 Product parameters . 9 4.1 Absolute limiting ratings 9 4.2 Operating environment 10 4.3 Functional specification. 10 4.4 Diagrams 10 5 Testing 10 5.1 General . 10 5.2 Characterization testing 10 5.3 Performance testing 10 6 Environmental specificat

24、ions . 10 6.1 General safety 10 6.2 Laser safety 10 6.3 Electromagnetic compatibility (EMC) requirements 11 Annex A (normative) Specifications for multimode 850-nm VCSEL device without a monitor photodiode (Case a) . 12 A.1 Absolute limiting ratings 12 A.2 Operating environment 12 A.3 Functional spe

25、cification. 12 A.4 Diagrams 13 A.5 Testing . 13 A.5.1 Characterization testing . 13 A.5.2 Performance testing. 13 Annex B (normative) Specifications for multimode 850 nm VCSEL device with a monitor photodiode (Case b) . 16 B.1 Absolute limiting ratings 16 B.2 Operating environment 16 B.3 Functional

26、specification. 16 B.4 Diagrams 17 B.5 Testing . 17 B.5.1 Characterization testing . 17 B.5.2 Performance testing. 18 Bibliography 20 Table 1 Operating environment 10 Table A.1 Absolute limiting ratings . 12 Table A.2 Operating conditions for functional specification . 12 Table A.3 Functional specifi

27、cation 13 Table A.4 Performance test plan 14 IEC 62149-2:2014 IEC 2014 3 Table A.5 Recommended performance test failure criteria . 15 Table B.1 Absolute limiting ratings . 16 Table B.2 Operating conditions for functional specification . 16 Table B.3 Functional specification 17 Table B.4 Performance

28、test plan 18 Table B.5 Recommended performance test failure criteria . 19 4 IEC 62149-2:2014 IEC 2014 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ FIBRE OPTIC ACTIVE COMPONENTS AND DEVICES PERFORMANCE STANDARDS Part 2: 850 nm discrete vertical cavity surface emitting laser devices FOREWORD 1) The Int

29、ernational Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and ele

30、ctronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committ

31、ees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non- governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for

32、Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee h

33、as representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accur

34、ate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regiona

35、l publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in so

36、me areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents

37、including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or

38、reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of t

39、he elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 62149-2 has been prepared by subcommittee 86C: Fibre optic systems and active devices, of IEC technical committee 86: F

40、ibre optics. This second edition cancels and replaces the first edition published in 2009 and constitutes a technical revision. The significant technical changes with respect to the previous edition include the introduction of the performance standards for 10 Gbit/s 850-nm wavelength, vertical cavit

41、y surface emitting laser (VCSEL) devices and the deletion of the package diagrams and pin configurations in Clause A.4 and Clause B.4 by citing the VCSEL package standard IEC 62148-15 instead. IEC 62149-2:2014 IEC 2014 5 The text of this standard is based on the following documents: CDV Report on vo

42、ting 86C/1146/CDV 86C/1229/RVC Full information on the voting for the approval of this standard can be found in the report on voting indicated in the above table. This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. A list of all parts of the IEC 62149 series, publish

43、ed under the general title Fibre optic active components and devices Performance standards, can be found on the IEC website. The committee has decided that the contents of this publication will remain unchanged until the stability date indicated on the IEC web site under “http:/webstore.iec.ch“ in t

44、he data related to the specific publication. At this date, the publication will be reconfirmed, withdrawn, replaced by a revised edition, or amended. 6 IEC 62149-2:2014 IEC 2014 INTRODUCTION Fibre optic laser devices are used to convert electrical signals into optical signals. This part of IEC 62149

45、 covers the performance specification for 850 nm discrete vertical cavity surface emitting laser devices in fibre optic telecommunication and optical data transmission applications. IEC 62149-2:2014 IEC 2014 7 FIBRE OPTIC ACTIVE COMPONENTS AND DEVICES PERFORMANCE STANDARDS Part 2: 850 nm discrete ve

46、rtical cavity surface emitting laser devices 1 Scope This part of IEC 62149 covers the performance specification for 850-nm discrete vertical cavity surface emitting laser (VCSEL) devices of transverse multimode types used for fibre optic telecommunication and optical data transmission applications.

47、 The performance standard contains a definition of the product performance requirements together with a series of sets of tests and measurements with clearly defined conditions, severities, and pass/fail criteria. The tests are intended to be run on a “once-off” basis to prove any products ability t

48、o satisfy the performance standards requirements. A product that has been shown to meet all the requirements of a performance standard can be declared as complying with the performance standard, but should then be controlled by a quality assurance/quality conformance program. Depending on the modula

49、tion speeds, sub-categorized specifications are defined. Types A1, A2, A3 and A4 correspond to 1,25 Gbit/s, 2,5 Gbit/s, 4,25 Gbit/s and 10 Gbit/s VCSELs, respectively. Each sub-categorized specification is also defined by separate details depending on the device types, such as specifications for a VCSEL device without a monitor photodiode (case a) and for a VCSEL device with a monitor