IEC 62059-31-1-2008 Electricity metering equipment - Dependability - Part 31-1 Accelerated reliability testing - Elevated temperature and humidity《电计量设备.可靠性.第31-1部分 增加可靠性测试.提高温度和湿度》.pdf

《IEC 62059-31-1-2008 Electricity metering equipment - Dependability - Part 31-1 Accelerated reliability testing - Elevated temperature and humidity《电计量设备.可靠性.第31-1部分 增加可靠性测试.提高温度和湿度》.pdf》由会员分享，可在线阅读，更多相关《IEC 62059-31-1-2008 Electricity metering equipment - Dependability - Part 31-1 Accelerated reliability testing - Elevated temperature and humidity《电计量设备.可靠性.第31-1部分 增加可靠性测试.提高温度和湿度》.pdf（178页珍藏版）》请在麦多课文档分享上搜索。

1、 IEC 62059-31-1 Edition 1.0 2008-10 INTERNATIONAL STANDARD NORME INTERNATIONALE Electricity metering equipment Dependability Part 31-1: Accelerated reliability testing Elevated temperature and humidity Equipements de comptage de llectricit Sret de fonctionnement Partie 31-1: Essais de fiabilit acclr

2、s Temprature et humidit leves IEC 62059-31-1:2008 THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2008 IEC, Geneva, Switzerland All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, includin

3、g photocopying and microfilm, without permission in writing from either IEC or IECs member National Committee in the country of the requester. If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or y

4、our local IEC member National Committee for further information. Droits de reproduction rservs. Sauf indication contraire, aucune partie de cette publication ne peut tre reproduite ni utilise sous quelque forme que ce soit et par aucun procd, lectronique ou mcanique, y compris la photocopie et les m

5、icrofilms, sans laccord crit de la CEI ou du Comit national de la CEI du pays du demandeur. Si vous avez des questions sur le copyright de la CEI ou si vous dsirez obtenir des droits supplmentaires sur cette publication, utilisez les coordonnes ci-aprs ou contactez le Comit national de la CEI de vot

6、re pays de rsidence. IEC Central Office 3, rue de Varemb CH-1211 Geneva 20 Switzerland Email: inmailiec.ch Web: www.iec.ch About the IEC The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes International Standards for all electrical, elec

7、tronic and related technologies. About IEC publications The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the latest edition, a corrigenda or an amendment might have been published. Catalogue of IEC publications: www.iec.ch/searchpub T

8、he IEC on-line Catalogue enables you to search by a variety of criteria (reference number, text, technical committee,). It also gives information on projects, withdrawn and replaced publications. IEC Just Published: www.iec.ch/online_news/justpub Stay up to date on all new IEC publications. Just Pub

9、lished details twice a month all new publications released. Available on-line and also by email. Electropedia: www.electropedia.org The worlds leading online dictionary of electronic and electrical terms containing more than 20 000 terms and definitions in English and French, with equivalent terms i

10、n additional languages. Also known as the International Electrotechnical Vocabulary online. Customer Service Centre: www.iec.ch/webstore/custserv If you wish to give us your feedback on this publication or need further assistance, please visit the Customer Service Centre FAQ or contact us: Email: cs

11、ciec.ch Tel.: +41 22 919 02 11 Fax: +41 22 919 03 00 A propos de la CEI La Commission Electrotechnique Internationale (CEI) est la premire organisation mondiale qui labore et publie des normes internationales pour tout ce qui a trait llectricit, llectronique et aux technologies apparentes. A propos

12、des publications CEI Le contenu technique des publications de la CEI est constamment revu. Veuillez vous assurer que vous possdez ldition la plus rcente, un corrigendum ou amendement peut avoir t publi. Catalogue des publications de la CEI: www.iec.ch/searchpub/cur_fut-f.htm Le Catalogue en-ligne de

13、 la CEI vous permet deffectuer des recherches en utilisant diffrents critres (numro de rfrence, texte, comit dtudes,). Il donne aussi des informations sur les projets et les publications retires ou remplaces. Just Published CEI: www.iec.ch/online_news/justpub Restez inform sur les nouvelles publicat

14、ions de la CEI. Just Published dtaille deux fois par mois les nouvelles publications parues. Disponible en-ligne et aussi par email. Electropedia: www.electropedia.org Le premier dictionnaire en ligne au monde de termes lectroniques et lectriques. Il contient plus de 20 000 termes et dfinitions en a

15、nglais et en franais, ainsi que les termes quivalents dans les langues additionnelles. Egalement appel Vocabulaire Electrotechnique International en ligne. Service Clients: www.iec.ch/webstore/custserv/custserv_entry-f.htm Si vous dsirez nous donner des commentaires sur cette publication ou si vous

16、avez des questions, visitez le FAQ du Service clients ou contactez-nous: Email: csciec.ch Tl.: +41 22 919 02 11 Fax: +41 22 919 03 00 IEC 62059-31-1 Edition 1.0 2008-10 INTERNATIONAL STANDARD NORME INTERNATIONALE Electricity metering equipment Dependability Part 31-1: Accelerated reliability testing

17、 Elevated temperature and humidity Equipements de comptage de llectricit Sret de fonctionnement Partie 31-1: Essais de fiabilit acclrs Temprature et humidit leves INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE XC ICS 29.240; 91.140.50 PRICE CODE CODE PRIX ISBN 2

18、-8318-1002-9 Registered trademark of the International Electrotechnical Commission Marque dpose de la Commission Electrotechnique Internationale 2 62059-31-1 IEC:2008 CONTENTS FOREWORD.5 INTRODUCTION.7 1 Scope.8 2 Normative references .8 3 Terms and definitions .9 4 Symbols, acronyms and abbreviatio

19、ns14 5 Description of quantitative accelerated life tests .15 5.1 Introduction .15 5.2 The life distribution15 5.3 The life-stress model.15 6 The Weibull distribution 16 6.1 Introduction .16 6.2 Graphical representation .16 6.3 Calculation of the distribution parameters19 6.3.1 Input data to be used

20、.19 6.3.2 Ranking of the time to failure.19 6.3.3 Reliability / unreliability estimates20 6.3.4 Calculation of the parameters21 7 The life-stress model 25 7.1 General .25 7.2 Linear equation of the acceleration factor26 7.3 Calculation of parameters n and E a .27 8 The quantitative accelerated life

21、testing method .28 8.1 Selection of samples .28 8.2 The steps to check product life characteristics 28 8.3 Procedure for terminating the maximum stress level test .29 8.4 Procedure to collect time to failure data and to repair meters 29 9 Definition of normal use conditions.29 9.1 Introduction .29 9

22、.2 Temperature and humidity conditions 30 9.2.1 Equipment for outdoor installation .30 9.2.2 Equipment for indoor installation .31 9.3 Temperature correction due to variation of voltage and current .31 9.3.1 Definition of the normal use profile of voltage and current .32 9.3.2 Measurement of the met

23、er internal temperature at each current and voltage 32 9.3.3 Calculation of the meter average internal temperature.32 9.4 Other conditions34 10 Classification and root cause of failures .34 11 Presentation of the results34 11.1 Information to be given34 11.2 Example35 12 Special cases .35 12.1 Cases

24、 of simplification 35 12.1.1 Minor evolution of product design 35 62059-31-1 IEC:2008 3 12.1.2 Verification of production batches35 12.2 Cases when additional information is needed 35 12.2.1 The parameter changes significantly from maximum stress level to medium or low stress level 35 12.2.2 Fault m

25、ode different between stress levels 35 Annex A (informative) Basic statistical background 36 Annex B (informative) The characteristics of the Weibull distribution38 Annex C (informative, see also draft IEC 62308) Life-stress models 42 Annex D (normative) Rank tables.44 Annex E (normative) Values of

26、the Gamma function (n) .47 Annex F (normative) Calculation of the minimum duration of the maximum stress level test .48 Annex G (informative) Example54 Bibliography84 INDEX 85 Figure 1 Weibull unreliability representation example with = 3 000, = 1,1, = 10 000.19 Figure 2 Example of graphical represe

27、ntation of F(t) in the case of Weibull distribution25 Figure 3 Example of regional climatic conditions30 Figure 4 Calculation of average year use conditions 31 Figure A.1 The probability density function 36 Figure A.2 The reliability and unreliability functions .37 Figure B.1 Effect of the parameter

28、 on the Weibull probability density function ) (t f 39 Figure B.2 Effect of the parameter on the Weibull probability density function ) (t f 40 Figure F.1 Unreliability at normal use conditions49 Figure F.2 Unreliability at maximum stress level 50 Figure G.1 Graphical representation of display failu

29、res for each stress level63 Figure G.2 Graphical representation of Q2 failures for each stress level 64 Figure G.3 Graphical representation of U1 failures for each stress level 65 Figure G.4 Example of climate data .67 Figure G.5 Graphical representation of all failures at normal use conditions 76 F

30、igure G.6 Final cumulative distribution with confidence intervals 81 Figure G.7 Reliability function extrapolated to normal use conditions .82 Figure G.8 Reliability function extrapolated to normal use conditions (First portion magnified).83 Table 1 Construction of ordinate (Y) 17 Table 2 Constructi

31、on of abscissa (t-) 17 Table 3 Equations format entered into a spreadsheet 18 Table 4 Example with = 3 000, = 1,1, = 10 00018 Table 5 Example of ranking process of times to failure.20 Table 6 Unreliability estimates by median rank 21 Table 7 Example of unreliability estimation for Weibull distributi

32、on.24 4 62059-31-1 IEC:2008 Table 8 Example of 90 % confidence bounds calculation for Weibull distribution24 Table 9 Values of the linear equation.27 Table 10 Example of procedure for temperature correction 33 Table G.1 Failures logged at 85 C with RH = 95 % .57 Table G.2 Failures logged at 85 C wit

33、h RH = 85 % .59 Table G.3 Failures logged at 85 C with RH = 75 % .60 Table G.4 Failures logged at 75 C with RH = 95 % .61 Table G.5 Failures logged at 65 C with RH = 95 % .62 Table G.6 Best fit Weibull distributions for display failures .63 Table G.7 Best fit Weibull distributions for Q2 failures64

34、Table G.8 Best fit Weibull distributions for U1 failures65 Table G.9 Values of the linear equation for display failures66 Table G.10 Values of the linear equation for Q2 failures 66 Table G.11 Values of the linear equation for other failures.66 Table G.12 Normal use profile of voltage and current.67

35、 Table G.13 Measurement of the internal temperature.69 Table G.14 Arrhenius acceleration factors compared to temperature measured at U nand 0,1 I max , for display failures .70 Table G.15 Arrhenius acceleration factors compared to temperature measured at U nand 0,1 I max , for Q2 failures71 Table G.

36、16 Arrhenius acceleration factors compared to temperature measured at U nand 0,1 I max , for U1 failures 72 Table G.17 Display failures extrapolated to normal use conditions.74 Table G.18 Q2 failures extrapolated to normal use conditions75 Table G.19 U1 failures extrapolated to normal use conditions

37、76 Table G.20 Best fit Weibull distributions at normal use conditions77 Table G.21 Display failures 90 % confidence bounds calculation .78 Table G.22 Q2 failures 90 % confidence bounds calculation 79 Table G.23 U1 failures 90 % confidence bounds calculation 80 62059-31-1 IEC:2008 5 INTERNATIONAL ELE

38、CTROTECHNICAL COMMISSION _ ELECTRICITY METERING EQUIPMENT DEPENDABILITY Part 31-1: Accelerated reliability testing Elevated temperature and humidity FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnica

39、l committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Te

40、chnical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, govern

41、mental and non- governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions o

42、r agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for internationa

43、l use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to

44、promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly i

45、ndicated in the latter. 5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any equipment declared to be in conformity with an IEC Publication. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall att

46、ach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fee

47、s) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publicati

48、on. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 62059-31 has been prepared by IEC technical committee 13: Electrical energy measurement, tariff- and load control. The text of this standard is based on the following documents: FDIS RVD 13/1437A/FDIS 13/1444/RVD Full information on the voting for the approval of this standard can be found in the report on voting indicated in the above table. Thi