IEC 61850-3-2013 Communication networks and systems for power utility automation - Part 3 General requirements《电力自动化的通信网络和系统.第3部分 通用要求》.pdf

《IEC 61850-3-2013 Communication networks and systems for power utility automation - Part 3 General requirements《电力自动化的通信网络和系统.第3部分 通用要求》.pdf》由会员分享，可在线阅读，更多相关《IEC 61850-3-2013 Communication networks and systems for power utility automation - Part 3 General requirements《电力自动化的通信网络和系统.第3部分 通用要求》.pdf（140页珍藏版）》请在麦多课文档分享上搜索。

1、 IEC 61850-3 Edition 2.0 2013-12 INTERNATIONAL STANDARD NORME INTERNATIONALE Communication networks and systems for power utility automation Part 3: General requirements Rseaux et systmes de communication pour lautomatisation des systmes lectriques Partie 3: Exigences gnrales IEC61850-3:2013 THIS PU

2、BLICATION IS COPYRIGHT PROTECTED Copyright 2013 IEC, Geneva, Switzerland All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writi

3、ng from either IEC or IECs member National Committee in the country of the requester. If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or your local IEC member National Committee for further infor

4、mation. Droits de reproduction rservs. Sauf indication contraire, aucune partie de cette publication ne peut tre reproduite ni utilise sous quelque forme que ce soit et par aucun procd, lectronique ou mcanique, y compris la photocopie et les microfilms, sans laccord crit de la CEI ou du Comit nation

5、al de la CEI du pays du demandeur. Si vous avez des questions sur le copyright de la CEI ou si vous dsirez obtenir des droits supplmentaires sur cette publication, utilisez les coordonnes ci-aprs ou contactez le Comit national de la CEI de votre pays de rsidence. IEC Central Office Tel.: +41 22 919

6、02 11 3, rue de Varemb Fax: +41 22 919 03 00 CH-1211 Geneva 20 infoiec.ch Switzerland www.iec.ch About the IEC The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes International Standards for all electrical, electronic and related technol

7、ogies. About IEC publications The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the latest edition, a corrigenda or an amendment might have been published. Useful links: IEC publications search - www.iec.ch/searchpub The advanced searc

8、h enables you to find IEC publications by a variety of criteria (reference number, text, technical committee,). It also gives information on projects, replaced and withdrawn publications. IEC Just Published - webstore.iec.ch/justpublished Stay up to date on all new IEC publications. Just Published d

9、etails all new publications released. Available on-line and also once a month by email. Electropedia - www.electropedia.org The worlds leading online dictionary of electronic and electrical terms containing more than 30 000 terms and definitions in English and French, with equivalent terms in additi

10、onal languages. Also known as the International Electrotechnical Vocabulary (IEV) on-line. Customer Service Centre - webstore.iec.ch/csc If you wish to give us your feedback on this publication or need further assistance, please contact the Customer Service Centre: csciec.ch. A propos de la CEI La C

11、ommission Electrotechnique Internationale (CEI) est la premire organisation mondiale qui labore et publie des Normes internationales pour tout ce qui a trait llectricit, llectronique et aux technologies apparentes. A propos des publications CEI Le contenu technique des publications de la CEI est con

12、stamment revu. Veuillez vous assurer que vous possdez ldition la plus rcente, un corrigendum ou amendement peut avoir t publi. Liens utiles: Recherche de publications CEI - www.iec.ch/searchpub La recherche avance vous permet de trouver des publications CEI en utilisant diffrents critres (numro de r

13、frence, texte, comit dtudes,). Elle donne aussi des informations sur les projets et les publications remplaces ou retires. Just Published CEI - webstore.iec.ch/justpublished Restez inform sur les nouvelles publications de la CEI. Just Published dtaille les nouvelles publications parues. Disponible e

14、n ligne et aussi une fois par mois par email. Electropedia - www.electropedia.org Le premier dictionnaire en ligne au monde de termes lectroniques et lectriques. Il contient plus de 30 000 termes et dfinitions en anglais et en franais, ainsi que les termes quivalents dans les langues additionnelles.

15、 Egalement appel Vocabulaire Electrotechnique International (VEI) en ligne. Service Clients - webstore.iec.ch/csc Si vous dsirez nous donner des commentaires sur cette publication ou si vous avez des questions contactez-nous: csciec.ch. IEC 61850-3 Edition 2.0 2013-12 INTERNATIONAL STANDARD NORME IN

16、TERNATIONALE Communication networks and systems for power utility automation Part 3: General requirements Rseaux et systmes de communication pour lautomatisation des systmes lectriques Partie 3: Exigences gnrales INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE XB

17、 ICS 33.200 PRICE CODE CODE PRIX ISBN 978-2-8322-1216-5 Registered trademark of the International Electrotechnical Commission Marque dpose de la Commission Electrotechnique Internationale Warning! Make sure that you obtained this publication from an authorized distributor. Attention! Veuillez vous a

18、ssurer que vous avez obtenu cette publication via un distributeur agr. 2 61850-3 IEC:2013 CONTENTS FOREWORD . 5 1 Scope 7 2 Normative references 7 3 Terms, definitions and abbreviations . 9 3.1 Terms and definitions . 9 3.2 Abbreviations . 20 4 Environmental conditions . 20 4.1 General 20 4.2 Normal

19、 environmental conditions . 20 4.3 Special environmental conditions . 21 4.4 Storage conditions . 22 5 Ratings 22 5.1 General 22 5.2 Rated voltage Auxiliary energizing voltage 22 AC voltage 22 5.2.1DC voltage 22 5.2.2Operating range 22 5.2.35.3 Binary input and output 22 Binary input 22 5.3.1Binary

20、output 22 5.3.25.4 Rated burden . 22 5.5 Rated ambient temperature 22 6 Design and construction 23 6.1 Marking 23 General 23 6.1.1Identification . 23 6.1.2Auxiliary supplies, I/O . 23 6.1.3Fuses . 24 6.1.4Terminals and operating devices 25 6.1.5Equipment protected by double or reinforced insulation

21、25 6.1.6Batteries . 26 6.1.7Test voltage marking 27 6.1.8Warning markings . 28 6.1.9Marking durability . 29 6.1.106.2 Documentation . 29 General 29 6.2.1Equipment ratings . 29 6.2.2Equipment installation 30 6.2.3Equipment commissioning and maintenance . 31 6.2.4Equipment operation . 31 6.2.56.3 Pack

22、aging 31 General 31 6.3.1Marking of packaging 32 6.3.26.4 Dimensions 32 6.5 Functional performance requirements 32 6.6 Product safety requirements 32 61850-3 IEC:2013 3 Clearances and creepage distances . 32 6.6.1IP rating 34 6.6.2Impulse voltage 34 6.6.3AC or d.c. dielectric voltage test . 36 6.6.4

23、Protective bonding resistance . 39 6.6.5Flammability of insulation materials, components and fire 6.6.6enclosure 39 Single-fault condition 41 6.6.76.7 Electromagnetic compatibility (EMC) 44 General 44 6.7.1Electromagnetic environment 45 6.7.2Immunity requirements and type tests . 45 6.7.3Emission re

24、quirements and type tests . 54 6.7.46.8 Burden test 55 Burden for AC power supply . 55 6.8.1Burden for DC power supply . 55 6.8.2Burden for binary input . 55 6.8.36.9 Climatic performance . 55 General 55 6.9.1Verification procedure . 56 6.9.2Climatic environmental tests . 57 6.9.36.10 Mechanical per

25、formance 61 Vibration response and endurance (sinusoidal) . 61 6.10.1Shock response, shock withstand and bump . 61 6.10.2Seismic . 61 6.10.36.11 Enclosure protection 62 7 Tests . 62 7.1 General 62 7.2 Test reference conditions . 62 7.3 Device reliability classes 62 7.4 Communication conditions durin

26、g tests 62 7.5 Conditions to be met (acceptance criteria) . 63 General 63 7.5.1Conditions to be met by class 1 and class 2 devices . 63 7.5.2Additional condition to be met by class 1 devices . 63 7.5.3Additional condition to be met by class 2 devices . 63 7.5.4Equipment functioning 64 7.5.5Exception

27、s 64 7.5.67.6 Test overview. 64 7.7 Test report content . 65 8 Marking, labelling and packaging . 66 9 Rules for transport, storage, installation, operation and maintenance 66 10 Product documentation 66 Bibliography 67 Figure 1 Example of power station and substation: selection of the specification

28、s for apparatus and related connections . 47 Figure 2 Example air-insulated substation (AIS): selection of the specifications for apparatus and related connections . 49 4 61850-3 IEC:2013 Table 1 Normal environmental conditions . 21 Table 2 Special environmental conditions 21 Table 3 Symbols 26 Tabl

29、e 4 Symbols and marking of test voltage(s) . 28 Table 5 Current levels in normal operational condition . 34 Table 6 Charge of energy of capacitance levels . 34 Table 7 AC test voltages 38 Table 8 Current levels in single fault condition . 44 Table 9 Immunity specification Enclosure port . 49 Table 1

30、0 Immunity specifications Signal ports . 50 Table 11 Immunity specifications Low voltage a.c. input power ports and low voltage a.c. output power ports . 51 Table 12 Immunity specifications Low voltage d.c. input power ports and low voltage d.c. output power ports . 52 Table 13 Immunity specificatio

31、ns Functional earth port . 53 Table 14 Emission tests Auxiliary power supply port . 54 Table 15 Emission tests Telecommunication port 54 Table 16 Emission tests below 1 GHz Enclosure port at a measuring distance of 10 m . 54 Table 17 Emission tests above 1 GHz Enclosure port at a measuring distance

32、of 3 m 54 Table 18 Dry heat test operational . 57 Table 19 Cold test operational . 58 Table 20 Dry heat test maximum storage temperature . 58 Table 21 Cold test minimum storage temperature 59 Table 22 Change of temperature test . 59 Table 23 Damp heat steady state test 60 Table 24 Damp heat cyclic t

33、est . 61 Table 25 Test reference conditions 62 Table 26 Device communications profiles (conditions) during tests for Ethernet equipment with specified ranges of frame size (for example, an Ethernet switch) 63 Table 27 Device communications profiles (conditions) during tests for serial devices withou

34、t specified ranges of frame size (for example, serial media converters) . 63 Table 28 Test overview 64 61850-3 IEC:2013 5 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ COMMUNICATION NETWORKS AND SYSTEMS FOR POWER UTILITY AUTOMATION Part 3: General requirements FOREWORD 1) The International Electrotech

35、nical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To thi

36、s end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National

37、Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) i

38、n accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from

39、all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held

40、 responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any div

41、ergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC

42、 marks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual ex

43、perts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC

44、 Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC

45、 Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 61850-3 has been prepared by IEC technical committee 57: Power systems management and associated information exchange system. This second edit

46、ion cancels and replaces the first edition published in 2002. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) requirements are in line with those of other equipment used in the same environment

47、(e.g. protection relays); b) product safety added based on IEC 60255-27; c) EMC requirements completed and in line with IEC 60255 series and IEC 61000-6-5. 6 61850-3 IEC:2013 The text of this standard is based on the following documents: FDIS Report on voting 57/1391/FDIS 57/1416/RVD Full informatio

48、n on the voting for the approval of this standard can be found in the report on voting indicated in the above table. This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. In this standard, the following print types are used: compliance statements: in italic type; marki

49、ngs: in bold type and caps. A list of all parts in the IEC 61850 series, published under the general title Communication networks and systems for power utility automation, can be found on the IEC website. The committee has decided that the contents of this publication will remain unchanged until the stability date indicated on the IEC web site under “http:/webstore.iec.ch