IEC 61754-27-2013 Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 27 Type M12-FO connector family《光纤互连装置和无源元件.光纤连接器接口.第27部分 M12-FO型连接器系列》.pdf

《IEC 61754-27-2013 Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 27 Type M12-FO connector family《光纤互连装置和无源元件.光纤连接器接口.第27部分 M12-FO型连接器系列》.pdf》由会员分享，可在线阅读，更多相关《IEC 61754-27-2013 Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 27 Type M12-FO connector family《光纤互连装置和无源元件.光纤连接器接口.第27部分 M12-FO型连接器系列》.pdf（34页珍藏版）》请在麦多课文档分享上搜索。

1、 IEC 61754-27 Edition 1.0 2013-05 INTERNATIONAL STANDARD NORME INTERNATIONALE Fibre optic interconnecting devices and passive components Fibre optic connector interfaces Part 27: Type M12-FO connector family Dispositifs dinterconnexion et composants passifs fibres optiques Interfaces de connecteurs

2、pour fibres optiques Partie 27: Famille de connecteurs de type M12-FO IEC 61754-27:2013 THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2013 IEC, Geneva, Switzerland All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any mea

3、ns, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or IECs member National Committee in the country of the requester. If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication,

4、 please contact the address below or your local IEC member National Committee for further information. Droits de reproduction rservs. Sauf indication contraire, aucune partie de cette publication ne peut tre reproduite ni utilise sous quelque forme que ce soit et par aucun procd, lectronique ou mcan

5、ique, y compris la photocopie et les microfilms, sans laccord crit de la CEI ou du Comit national de la CEI du pays du demandeur. Si vous avez des questions sur le copyright de la CEI ou si vous dsirez obtenir des droits supplmentaires sur cette publication, utilisez les coordonnes ci-aprs ou contac

6、tez le Comit national de la CEI de votre pays de rsidence. IEC Central Office Tel.: +41 22 919 02 11 3, rue de Varemb Fax: +41 22 919 03 00 CH-1211 Geneva 20 infoiec.ch Switzerland www.iec.ch About the IEC The International Electrotechnical Commission (IEC) is the leading global organization that pr

7、epares and publishes International Standards for all electrical, electronic and related technologies. About IEC publications The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the latest edition, a corrigenda or an amendment might have

8、been published. Useful links: IEC publications search - www.iec.ch/searchpub The advanced search enables you to find IEC publications by a variety of criteria (reference number, text, technical committee,). It also gives information on projects, replaced and withdrawn publications. IEC Just Publishe

9、d - webstore.iec.ch/justpublished Stay up to date on all new IEC publications. Just Published details all new publications released. Available on-line and also once a month by email. Electropedia - www.electropedia.org The worlds leading online dictionary of electronic and electrical terms containin

10、g more than 30 000 terms and definitions in English and French, with equivalent terms in additional languages. Also known as the International Electrotechnical Vocabulary (IEV) on-line. Customer Service Centre - webstore.iec.ch/csc If you wish to give us your feedback on this publication or need fur

11、ther assistance, please contact the Customer Service Centre: csciec.ch. A propos de la CEI La Commission Electrotechnique Internationale (CEI) est la premire organisation mondiale qui labore et publie des Normes internationales pour tout ce qui a trait llectricit, llectronique et aux technologies ap

12、parentes. A propos des publications CEI Le contenu technique des publications de la CEI est constamment revu. Veuillez vous assurer que vous possdez ldition la plus rcente, un corrigendum ou amendement peut avoir t publi. Liens utiles: Recherche de publications CEI - www.iec.ch/searchpub La recherch

13、e avance vous permet de trouver des publications CEI en utilisant diffrents critres (numro de rfrence, texte, comit dtudes,). Elle donne aussi des informations sur les projets et les publications remplaces ou retires. Just Published CEI - webstore.iec.ch/justpublished Restez inform sur les nouvelles

14、 publications de la CEI. Just Published dtaille les nouvelles publications parues. Disponible en ligne et aussi une fois par mois par email. Electropedia - www.electropedia.org Le premier dictionnaire en ligne au monde de termes lectroniques et lectriques. Il contient plus de 30 000 termes et dfinit

15、ions en anglais et en franais, ainsi que les termes quivalents dans les langues additionnelles. Egalement appel Vocabulaire Electrotechnique International (VEI) en ligne. Service Clients - webstore.iec.ch/csc Si vous dsirez nous donner des commentaires sur cette publication ou si vous avez des quest

16、ions contactez-nous: csciec.ch. IEC 61754-27 Edition 1.0 2013-05 INTERNATIONAL STANDARD NORME INTERNATIONALE Fibre optic interconnecting devices and passive components Fibre optic connector interfaces Part 27: Type M12-FO connector family Dispositifs dinterconnexion et composants passifs fibres opti

17、ques Interfaces de connecteurs pour fibres optiques Partie 27: Famille de connecteurs de type M12-FO INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE N ICS 33.180.20 PRICE CODE CODE PRIX ISBN 978-2-83220-809-0 Registered trademark of the International Electrotechn

18、ical Commission Marque dpose de la Commission Electrotechnique Internationale Warning! Make sure that you obtained this publication from an authorized distributor. Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agr. 2 61754-27 IEC:2013 CONTENTS FOREWORD .

19、 3 1 Scope . 5 2 Normative references . 5 3 Description . 5 4 Interfaces . 6 4.1 General . 6 4.2 Part 27-1 plug connector interface for category B1.1 or B1.3 fibres . 6 4.3 Part 27-2 plug connector interface for category A3c or A3d fibres . 8 4.4 Part 27-3 plug connector interface for category A4a o

20、r A4d fibres . 10 4.5 Part 27-4 adaptor connector interface 12 4.6 Part 27-5 active device interface . 13 Bibliography 15 Figure 1 Plug connector interface PC . 7 Figure 2 Detail of spherically polished ferrule PC endface 8 Figure 3 Plug connector interface for category A3c or A3d fibres 9 Figure 4

21、Detail of polished ferrule endface for category A3c or A3d fibres 10 Figure 5 Plug connector interface for category A4a or A4d fibres . 11 Figure 6 Detail of polished ferrule endface for category A4a or A4d fibres . 12 Figure 7 Adaptor connector interface . 13 Figure 8 Active device interface . 14 T

22、able 1 Interfaces 6 Table 2 Intermatability . 6 Table 3 Dimensions for the details in Figure 1 7 Table 4 Dimensions for the details in Figure 2 8 Table 5 Ferrule grades . 8 Table 6 Dimensions of plug connector interface for category A3c or A3d fibres 9 Table 7 Dimensions for the details in Figure 4

23、10 Table 8 Ferrule grades . 10 Table 9 Dimensions of plug connector interface for category A4a or A4d fibres . 11 Table 10 Dimensions for the details in Figure 6 12 Table 11 Ferrule grades . 12 Table 12 Dimensions of adaptor connector interface 13 Table 13 Dimensions of active device interface 14 61

24、754-27 IEC:2013 3 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS FIBRE OPTIC CONNECTOR INTERFACES Part 27: Type M12-FO connector family FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardizat

25、ion comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes Internatio

26、nal Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in t

27、his preparatory work. International, governmental and non- governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the t

28、wo organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have t

29、he form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinte

30、rpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national

31、 or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carr

32、ied out by independent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Com

33、mittees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn

34、to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be

35、 held responsible for identifying any or all such patent rights. International Standard IEC 61754-27 has been prepared by subcommittee 86B: Fibre optic interconnecting devices and passive components, of IEC technical committee 86: Fibre optics. The text of this standard is based on the following doc

36、uments: FDIS Report on voting 86B/3597/FDIS 86B/3626/RVD Full information on the voting for the approval of this standard can be found in the report on voting indicated in the above table. This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. 4 61754-27 IEC:2013 A list

37、 of all parts of the IEC 61754 series, published under the general title, Fibre optic interconnecting and passive components Fibre optic connector interfaces, can be found on the IEC website. Future standards in this series will carry the new general title as cited above. Titles of existing standard

38、s in this series will be updated at the time of the next edition. The committee has decided that the contents of this publication will remain unchanged until the stability date indicated on the IEC web site under “http:/webstore.iec.ch“ in the data related to the specific publication. At this date,

39、the publication will be reconfirmed, withdrawn, replaced by a revised edition, or amended. 61754-27 IEC:2013 5 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS FIBRE OPTIC CONNECTOR INTERFACES Part 27: Type M12-FO connector family 1 Scope This part of IEC 61754 defines the standard interfa

40、ce dimensions for the type M12-FO family of connectors. This connector is of duplex plug/adaptor/plug configuration and designed for industrial environment as described in ISO/IEC TR 29106, severity class M 3and I 3 . Multiple designs for machines and equipment require solutions with different fibre

41、 types. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including a

42、ny amendments) applies. IEC 60529, Degrees of protection provided by enclosures (IP Code) IEC 60793-2-30, Optical fibres Part 2-30: Product specifications Sectional specification for category A3 multimode fibres IEC 60793-2-40, Optical fibres Part 2-40: Product specifications Sectional specification

43、 for category A4 multimode fibres IEC 60793-2-50, Optical fibres Part 2-50: Product specifications Sectional specification for class B single-mode fibres IEC 61076-2-101, Connectors for electronic equipment Product requirements Part 2-101: Circular connectors Detail specification for M12 connectors

44、with screw-locking IEC 61755-3 (all parts 3), Fibre optic connector optical interfaces Part 3: Optical interface ISO/IEC TR 29106, Information technology Generic cabling Introduction to the MICE environmental classification 3 Description The M12-FO connector family is a duplex plug connector set of

45、plug/adaptor configuration which is characterized by a 2,5 mm nominal ferrule diameter and can be used for fibres as described in Table 1. This circular connector includes a housing with a M12-thread screw locking mechanism and a protection according to IEC 60529, IP 65 and IP 67. Electrical M12-con

46、nectors are typically used for industrial process, measurement and control. They are described and dimensioned in IEC 61076-2-101 and additional information for the optical connector is given in this standard. 6 61754-27 IEC:2013 The coupling mechanism is spring loaded relative to the ferrules in th

47、e direction of the optical axes. The ferrules stand back from the front face in the unmated condition due to a shroud to shelter them from mechanical impact during handling and the mating process. The plug and adaptor are equipped with four keys to define the mating orientation of the duplex connect

48、or. The optical alignment mechanism of the adaptor is from a resilient sleeve style. The alignment mechanism for the active device interface can be a rigid bore or a resilient sleeve. 4 Interfaces 4.1 General This standard contains the interfaces for the type M12-FO connector family as described in

49、Table 1. The interfaces are intermatable according to Table 2. Table 1 Interfaces Interface Title 27-1 Plug connector interface with spherical polished endface (PC) for IEC 60793-2-50 category B1.1 or B1.3 fibres. 27-2 Plug connector interface for IEC 60793-2-30 category A3c or A3d fibres. 27-3 Plug connector interface for IEC 60793-2-40 category A4a or A4d fibres. 27-4 A