TIA-928-2004 TIA-41 Support for the Mobile Equipment Identity (MEID)《TIA-41对移动设备识别(MEID)的支持》.pdf

《TIA-928-2004 TIA-41 Support for the Mobile Equipment Identity (MEID)《TIA-41对移动设备识别(MEID)的支持》.pdf》由会员分享，可在线阅读，更多相关《TIA-928-2004 TIA-41 Support for the Mobile Equipment Identity (MEID)《TIA-41对移动设备识别(MEID)的支持》.pdf（32页珍藏版）》请在麦多课文档分享上搜索。

1、 TIA STANDARD TIA-41 Support for the Mobile Equipment Identity (MEID) TIA-928 AUGUST 2004 TELECOMMUNICATIONS INDUSTRY ASSOCIATION The Telecommunications Industry Association represents the communications sector of Copyright Telecommunications Industry Association Provided by IHS under license with E

2、IANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-NOTICE TIA Engineering Standards and Publications are designed to serve the public interest through eliminating misunderstandings between manufacturers and purchasers, facilitating interchangeability and improvement

3、 of products, and assisting the purchaser in selecting and obtaining with minimum delay the proper product for their particular need. The existence of such Publications shall not in any respect preclude any member or non-member of TIA from manufacturing or selling products not conforming to such Pub

4、lications. Neither shall the existence of such Documents preclude their voluntary use by non-TIA members, either domestically or internationally. TIA DOCUMENTS TIA Documents contain information deemed to be of technical value to the industry, and are published at the request of the originating Commi

5、ttee without necessarily following the rigorous public review and resolution of comments which is a procedural part of the development of a American National Standard (ANS). Further details of the development process are available in the TIA Engineering Manual, located at http:/www.tiaonline.org/sta

6、ndards/sfg/engineering_manual.cfm TIA Documents shall be reviewed on a five year cycle by the formulating Committee and a decision made on whether to reaffirm, revise, withdraw, or proceed to develop an American National Standard on this subject. Suggestions for revision should be directed to: Stand

7、ards (b) there is no assurance that the Document will be approved by any Committee of TIA or any other body in its present or any other form; (c) the Document may be amended, modified or changed in the standards development or any editing process. The use or practice of contents of this Document may

8、 involve the use of intellectual property rights (“IPR”), including pending or issued patents, or copyrights, owned by one or more parties. TIA makes no search or investigation for IPR. When IPR consisting of patents and published pending patent applications are claimed and called to TIAs attention,

9、 a statement from the holder thereof is requested, all in accordance with the Manual. TIA takes no position with reference to, and disclaims any obligation to investigate or inquire into, the scope or validity of any claims of IPR. TIA will neither be a party to discussions of any licensing terms or

10、 conditions, which are instead left to the parties involved, nor will TIA opine or judge whether proposed licensing terms or conditions are reasonable or non-discriminatory. TIA does not warrant or represent that procedures or practices suggested or provided in the Manual have been complied with as

11、respects the Document or its contents. TIA does not enforce or monitor compliance with the contents of the Document. TIA does not certify, inspect, test or otherwise investigate products, designs or services or any claims of compliance with the contents of the Document. ALL WARRANTIES, EXPRESS OR IM

12、PLIED, ARE DISCLAIMED, INCLUDING WITHOUT LIMITATION, ANY AND ALL WARRANTIES CONCERNING THE ACCURACY OF THE CONTENTS, ITS FITNESS OR APPROPRIATENESS FOR A PARTICULAR PURPOSE OR USE, ITS MERCHANTABILITY AND ITS NON-INFRINGEMENT OF ANY THIRD PARTYS INTELLECTUAL PROPERTY RIGHTS. TIA EXPRESSLY DISCLAIMS

13、ANY AND ALL RESPONSIBILITIES FOR THE ACCURACY OF THE CONTENTS AND MAKES NO REPRESENTATIONS OR WARRANTIES REGARDING THE CONTENTS COMPLIANCE WITH ANY APPLICABLE STATUTE, RULE OR REGULATION, OR THE SAFETY OR HEALTH EFFECTS OF THE CONTENTS OR ANY PRODUCT OR SERVICE REFERRED TO IN THE DOCUMENT OR PRODUCE

14、D OR RENDERED TO COMPLY WITH THE CONTENTS. TIA SHALL NOT BE LIABLE FOR ANY AND ALL DAMAGES, DIRECT OR INDIRECT, ARISING FROM OR RELATING TO ANY USE OF THE CONTENTS CONTAINED HEREIN, INCLUDING WITHOUT LIMITATION ANY AND ALL INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR

15、 LOSS OF BUSINESS, LOSS OF PROFITS, LITIGATION, OR THE LIKE), WHETHER BASED UPON BREACH OF CONTRACT, BREACH OF WARRANTY, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY OR OTHERWISE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE FOREGOING NEGATION OF DAMAGES IS A FUNDAMENTAL ELEMENT OF THE

16、USE OF THE CONTENTS HEREOF, AND THESE CONTENTS WOULD NOT BE PUBLISHED BY TIA WITHOUT SUCH LIMITATIONS.Copyright Telecommunications Industry Association Provided by IHS under license with EIANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-TIA-92812345678910111213141

17、5161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960iRevision HistoryThis document is subject to change.FOREWORDThis specification is for use in conjunction with TIA-41-D Chapters 1, 3 and 6 and with TIA-41-EParts 000 and 5xx.Ver. Date RemarksRev. 0 August 2004

18、 Initial PublicationCopyright Telecommunications Industry Association Provided by IHS under license with EIANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-TIA-928123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555

19、657585960iiTIA-41 Support for the Mobile Equipment Identity (MEID)ContentsNormative References1Informative References1Assumptions.1Editorial Conventions 11 TIA-41-000 Modifications 32 TIA-41-3xx Modifications 42.1 Check MEID procedure 42.2 Unsuccessful Status Request 53 TIA-41 Part 5xx Modifications

20、 .63.1 Data Transfer Services 63.1.1 SS7-Based Data Transfer Services 63.2 Application Services .63.2.1 MAP Operations 63.2.2 Operation Definitions.63.3 Map Parameters 93.3.1 General.93.3.2 Parameter Definitions .104 TIA/EIA-41 Signaling Procedures 154.1 (NEW) Check MEID 154.1.1 VLR Initiating a Che

21、ck MEID.154.1.2 EIR Receiving a Check MEID Request.164.2 (NEW) Status Request .184.2.1 VLR Initiating a Status Request 184.2.2 MSC Receiving a StatusRequest INVOKE .185 Operation Timer Values 206 TIA-41 Operation Changes for MEID.217 TIA-41 Parameter CHANGEs for MEID 23Copyright Telecommunications I

22、ndustry Association Provided by IHS under license with EIANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-TIA-9281234567891011121314151617181920212223242526272829303132333435363738394041424344454647484950515253545556575859601NORMATIVE REFERENCESGSM MAP 3GPP TS 29.0

23、02. 3rd Generation Partnership Project; Technical SpecificationGroup Core Network; Mobile Application Part (MAP) Specification.CDMA 3GPP2 C.S0001,2,3,4,5,6-D v1.0. cdma2000 Spread Spectrum Systems.March 2004.TIA-2000-D. cdma2000 Spread Spectrum Systems. March 2004.MEIDStg1 3GPP2 S.R0048-A v2.0. 3G M

24、obile Equipment Identifier (MEID) Stage 1.April 2004.INFORMATIVE REFERENCESMEIDPROC 3GPP2 SC.R4001. Global Wireless Equipment Numbering AdministrationProcedures. February 2004.MEIDGDL 3GPP2 SC.R4002. Mobile Equipment Identifier (MEID) Assignment Guidelinesand Procedures. February 2004.RUIM 3GPP2 C.S

25、0023-B v1.0. Removable User Identity Module for Spread SpectrumSystems. May 2004.TIA IS-820-B. Removable User Identity Module for Spread Spectrum Systems.May 2004.ASSUMPTIONS1. MEID-equipped mobiles do not have a true ESN. They transmit either UIMID or pseudo-ESN as ESNThese MSs may also transmit an

26、 MEID under some circumstances.2. In the development of this document it has been assumed that MSCs connected to BaseStations that do not support TIA-2000-D do not need the MEID.3. The HLR, VLR and AC shall not use MEID for subscription validation or authentication.4. Work activity for MEID will als

27、o be included in TIA/ATIS J-STD-036-B,X.P0004.0 v2/TIA-41-E-1 and X.S0002/TIA-881-1.5. The CheckMEID operation is optional. If an operator chooses to use this operation, thecriteria for use may include whether the MS is equipped with a Removable UIM.EDITORIAL CONVENTIONSThe following editorial conve

28、ntions are used for this document: underline: addition. Conditional text (FrameMaker source) is “X.S0008-0 v1.0/TIA-928addition”.cross out: deletion. Conditional text (FrameMaker source) is “X.S0008-0 v1.0/TIA-928deletion”.Copyright Telecommunications Industry Association Provided by IHS under licen

29、se with EIANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-TIA-9281234567891011121314151617181920212223242526272829303132333435363738394041424344454647484950515253545556575859602 change bar: indicates additions or deletions. Conditional text (FrameMaker Source)“X.S

30、0008-0 v1.0/TIA-928 new section”.Copyright Telecommunications Industry Association Provided by IHS under license with EIANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-TIA-92812345678910111213141516171819202122232425262728293031323334353637383940414243444546474849

31、50515253545556575859603 TIA-41-000 Modifications1TIA-41-000MODIFICATIONSThis section provides modifications for the introductory matter for TIA-41 (part 000).Pseudo-ESN (pESN)A 32-bit number derived from the MEID and used in place of the electronic serial number. The highorder 8 bits are always 0x80

32、 and the remaining 24 bits are derived using the SHA-1 algorithm asdefined in CDMA.Copyright Telecommunications Industry Association Provided by IHS under license with EIANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-TIA-928TIA-41-3xx Modifications123456789101112

33、13141516171819202122232425262728293031323334353637383940414243444546474849505152535455565758596042TIA-41-3XXMODIFICATIONSThis section provides information flows for MEID support according to the structure of TIA-41Parts 3xx.2.1 Check MEID procedureThis scenario illustrates the Check MEID procedure.

34、In this case, the VLR does not have the MEIDof the MS and initiates the Status Request operation to retrieve it.a. The VLR sends a STATREQto the Serving MSC with the MSID parameter set to identify thetarget MS. The RECORD_TYPE parameter is set to request the MEID information record.b. Optionally, th

35、e MSC sends a status requestmessage to the MS requesting the MEIDinformation record.c. The MS returns its MEID in the status responsemessage.d. The MSC sends a statreqwith the requested MEID to the VLR.e. The VLR can now check the MEID in the EIR database. The VLR sends the MEID to the EIRin CHECKME

36、ID.f. The EIR returns the requested equipment status to the VLR in the checkmeid. The status maybe Normal, Block, Track, or No Entry.statreq MEIDcheckmeid MEIDSTATUSstatus requestabcdefCHECKMEID MEIDCMTSTATREQ MSID, RECORD_TYPE (MEID)STRTMSEIR VLR MSCstatus response MEIDCopyright Telecommunications

37、Industry Association Provided by IHS under license with EIANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-TIA-9281234567891011121314151617181920212223242526272829303132333435363738394041424344454647484950515253545556575859605 Unsuccessful Status Request2.2 Unsucce

38、ssful Status Request This scenario illustrates an unsuccessful StatusRequest operation.a. The VLR sends a STATREQto the Serving MSC with the MSID parameter set to identify thetarget MS. The Record_Type parameter is set to request the MEID information record.b. The MSC sends a status requestmessage t

39、o the MS requesting the MEID information record.c. The MS cannot provide the requested information (e.g. because it does not support the correctrevision of CDMA) and sends the MS Reject Order.d. The MSC sends an empty statreqto the VLR to indicate that the status responsemessagewas not received from

40、 the MS.abcdSTRTMSVLR MSCMS reject orderstatreq STATREQ MSID, Record_Type (MEID)status requestCopyright Telecommunications Industry Association Provided by IHS under license with EIANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-TIA-928TIA-41 Part 5xx Modification

41、s12345678910111213141516171819202122232425262728293031323334353637383940414243444546474849505152535455565758596063TIA-41 PART 5XX MODIFICATIONSThis section provides the additions and modifications to TIA/EIA-41-DChapter 5 signaling protocolfor MEID support.3.1 Data Transfer Services3.1.1 SS7-Based D

42、ata Transfer Services(See TIA/EIA-41.5-D, page 5-6)3.2 Application Services3.2.1 MAP Operations3.2.1.2 Operation Specifiers(See TIA/EIA-41.5-D, page 5-24)3.2.2 Operation Definitions(See TIA/EIA-41.5-D, page 5-27)Table 1 MTP Message Priority Values for TIA/EIA-41 OperationsTIA/EIA-41Operation MTP Mes

43、sage PriorityCheckMEID 0StatusRequest 0Table 8TIA/EIA-41MAP Operation SpecifiersOperation Name Operation SpecifierHGFEDCBA DecimalCheckMEID 0 1 1 0 1 0 0 0 104StatusRequest 0 1 1 0 1 0 1 1 107Table 9 Summary of MAP OperationsOperation ReferenceCheckMEID 3.2.2.1StatusRequest 3.2.2.2Copyright Telecomm

44、unications Industry Association Provided by IHS under license with EIANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-TIA-9281234567891011121314151617181920212223242526272829303132333435363738394041424344454647484950515253545556575859607 Application Services3.2.2.1

45、 CheckMEID (new)(New for TIA/EIA-41-D Chapter 5, Section 6.4.2)The CheckMEID (CHECKMEID) operation is used to request information from an EIR on the statusof a specific MEID.The following table lists the possible combinations of invoking and responding NEs.The CheckMEID operation is initiated with a

46、 TCAP INVOKE (LAST). This is carried by a TCAPQUERY WITH PERMISSION package. The Parameter Set is encoded as follows:The CheckMEID operation success is reported with a TCAP RETURN RESULT (LAST). This iscarried by a TCAP RESPONSE package. The Parameter Set is encoded as follows:Table 10 FE Combinatio

47、ns for CheckMEIDINVOKING NE RESPONDING NECase 1 VLR EIRCheckMEID INVOKE Parameters Timer: CMTField Value Type Reference NotesIdentifier SET NATIONAL 18 M 6.3.2.1Length variable octets M 6.3.2.1ContentsMEID M 3.3.2.3 aNotes:a. Include to identify the MEID to be checked.CheckMEID RETURN RESULTParamete

48、rsField Value Type Reference NotesIdentifier SET NATIONAL 18 M 6.3.2.1Length variable octets M 6.3.2.1ContentsMEIDStatus M 3.3.2.97 aNotes:a. Include to specify the status of the ME identified by the given MEID.Copyright Telecommunications Industry Association Provided by IHS under license with EIAN

49、ot for ResaleNo reproduction or networking permitted without license from IHS-,-,-TIA-928Application Services12345678910111213141516171819202122232425262728293031323334353637383940414243444546474849505152535455565758596083.2.2.2 StatusRequest (new)(New for TIA/EIA-41-D Chapter 5, Section 6.4.2)The StatusRequest (S