TIA-568-C 2 ERTA-2010 Balanced Twisted-Pair Telecommunications Cabling and Components Standards《对称双绞合线电信电缆敷设和部件标准》.pdf

《TIA-568-C 2 ERTA-2010 Balanced Twisted-Pair Telecommunications Cabling and Components Standards《对称双绞合线电信电缆敷设和部件标准》.pdf》由会员分享，可在线阅读，更多相关《TIA-568-C 2 ERTA-2010 Balanced Twisted-Pair Telecommunications Cabling and Components Standards《对称双绞合线电信电缆敷设和部件标准》.pdf（2页珍藏版）》请在麦多课文档分享上搜索。

1、Errata Sheet for ANSI/TIA-568-C.2-2009 Page 1. Change references 1. From: ANSI/ICEA S-90-661-2006, Category 3, 5, & 5e Individually Unshielded Twisted Pair Indoor Cables (With or Without an Overall Shield) for Use in General Purpose and LAN Communication Wiring Systems Technical Requirements, 2006 T

2、o: ANSI/ICEA S-90-661-2002, Category 3, 5, & 5e Individually Unshielded Twisted Pair Indoor Cables (With or Without an Overall Shield) for Use in General Purpose and LAN Communication Wiring Systems Technical Requirements, 2002 2. Delete: ANSI/ICEA S-102-732-2009, Standard for Category 6 and 6A, 100

3、 Ohm Individually Unshielded Twisted Pairs, Indoor Cables (With or Without an Overall Shield) for Use in LAN Communication Wiring Systems Technical Requirements, 2009 Page 8, Clause 5.3 Change references 1. From: Horizontal cables shall comply with the mechanical performance requirements, testing an

4、d test methods in ANSI/ICEA S-90-661-2006 for category 3, ANSI/ICEA S-90-661-2006 for category 5e, ANSI/ICEA S-102-732-2009 for category 6, and ANSI/ICEA S-102-732-2009 for category 6A. To: Category 3, 5e, 6, and 6A horizontal cables shall comply with the mechanical performance requirements, testing

5、 and test methods in ANSI/ICEA S 90 661 2002 2. From: In addition to the applicable requirements of ANSI/ICEA S-90-661-2006 and ANSI/ICEA S-102-732-2009, the physical design of category 3, 5e, 6, and 6A horizontal cables shall meet the additional requirements of this clause. To: In addition to the a

6、pplicable requirements of ANSI/ICEA S 90 661-2002 the physical design of category 3, 5e, 6, and 6A horizontal cables shall meet the additional requirements of this clause. Page 10, Clause 5.5.1 Change references 1. From: Cord cables shall comply with the mechanical performance requirements, testing

7、and test methods in ANSI/ICEA S-90-661-2006 for category 3, ANSI/ICEA S-90-661-2006 for category 5e, ANSI/ICEA S-102-732-2009 for category 6, and ANSI/ICEA S-102-732-2009 for category 6A. To: Category 3, 5e, 6, and 6A cord cables shall comply with the mechanical performance requirements, testing and

8、 test methods in ANSI/ICEA S 90 661 2002 Page 10, Clause 5.6 Change references 1. From: Backbone cables shall comply with the mechanical performance requirements, testing and test methods in ANSI/ICEA S-90-661-2006 for category 3, ANSI/ICEA S-90-661-2006 for category 5e, ANSI/ICEA S-102-732-2009 for

9、 category 6, and ANSI/ICEA S-102-732-2009 for category 6A. To: Category 3, 5e, 6, and 6A backbone cables shall comply with the mechanical performance requirements, testing and test methods in ANSI/ICEA S 90 661 2002. Page 15, Clause 5.8.1 Change references 1. From: Cables used to construct cross-connect jumpers shall meet the requirements of clause 5.3.1 and the applicable requirements of ANSI/ICEA-S-90-661-2006. To: Cables used to construct cross-connect jumpers shall meet the requirements of clause 5.3.1 and the applicable requirements of ANSI/ICEA S 90 661 2002.