TIA-41 510-E-2004 Part 510 Wireless Radiotelecommunications Intersystem Operations C X 25 Transport Signaling Protocols《Part 510 无绳无线电通信内部系统操作 X 25传输信令协议》.pdf

《TIA-41 510-E-2004 Part 510 Wireless Radiotelecommunications Intersystem Operations C X 25 Transport Signaling Protocols《Part 510 无绳无线电通信内部系统操作 X 25传输信令协议》.pdf》由会员分享，可在线阅读，更多相关《TIA-41 510-E-2004 Part 510 Wireless Radiotelecommunications Intersystem Operations C X 25 Transport Signaling Protocols《Part 510 无绳无线电通信内部系统操作 X 25传输信令协议》.pdf（10页珍藏版）》请在麦多课文档分享上搜索。

1、 TIA-41.510-E (Revision of TIA-41.D) October 2010 Part 510: Wireless Radiotelecommunications Intersystem Operations X.25 Transport Signaling Protocols ANSI/TIA-41.510-E-2004 APPROVED: APRIL 20, 2004 REAFFIRMATION: SEPTEMBER 1, 2010 NOTICE TIA Engineering Standards and Publications are designed to se

2、rve the public interest through eliminating misunderstandings between manufacturers and purchasers, facilitating interchangeability and improvement of products, and assisting the purchaser in selecting and obtaining with minimum delay the proper product for their particular need. The existence of su

3、ch Standards and Publications shall not in any respect preclude any member or non-member of TIA from manufacturing or selling products not conforming to such Standards and Publications. Neither shall the existence of such Standards and Publications preclude their voluntary use by Non-TIA members, ei

4、ther domestically or internationally. Standards and Publications are adopted by TIA in accordance with the American National Standards Institute (ANSI) patent policy. By such action, TIA does not assume any liability to any patent owner, nor does it assume any obligation whatever to parties adopting

5、 the Standard or Publication. This Standard does not purport to address all safety problems associated with its use or all applicable regulatory requirements. It is the responsibility of the user of this Standard to establish appropriate safety and health practices and to determine the applicability

6、 of regulatory limitations before its use. (From Standards Proposal No. 3-3590.510-RV5, formulated under the cognizance of the TIA TR-45.2 Subcommittee on Wireless Intersystem Technology.) Published by TELECOMMUNICATIONS INDUSTRY ASSOCIATION 2002 Standards and Technology Department 2500 Wilson Boule

7、vard Arlington, VA 22201 U.S.A. PRICE: Please refer to current Catalog of TIA TELECOMMUNICATIONS INDUSTRY ASSOCIATION STANDARDS AND ENGINEERING PUBLICATIONS or call Global Engineering Documents, USA and Canada (1-800-854-7179) International (303-397-7956) or search online at http:/www.tiaonline.org/

8、standards/search_n_order.cfm All rights reserved Printed in U.S.A. NOTICE OF COPYRIGHT This document is copyrighted by the TIA. Reproduction of these documents either in hard copy or soft copy (including posting on the web) is prohibited without copyright permission. For copyright permission to repr

9、oduce portions of this document, please contact TIA Standards Department or go to the TIA website (www.tiaonline.org) for details on how to request permission. Details are located at: http:/www.tiaonline.org/standards/catalog/info.cfm#copyright OR Telecommunications Industry Association Standards (b

10、) there is no assurance that the Document will be approved by any Committee of TIA or any other body in its present or any other form; (c) the Document may be amended, modified or changed in the standards development or any editing process. The use or practice of contents of this Document may involv

11、e the use of intellectual property rights (“IPR”), including pending or issued patents, or copyrights, owned by one or more parties. TIA makes no search or investigation for IPR. When IPR consisting of patents and published pending patent applications are claimed and called to TIAs attention, a stat

12、ement from the holder thereof is requested, all in accordance with the Manual. TIA takes no position with reference to, and disclaims any obligation to investigate or inquire into, the scope or validity of any claims of IPR. TIA will neither be a party to discussions of any licensing terms or condit

13、ions, which are instead left to the parties involved, nor will TIA opine or judge whether proposed licensing terms or conditions are reasonable or non-discriminatory. TIA does not warrant or represent that procedures or practices suggested or provided in the Manual have been complied with as respect

14、s the Document or its contents. If the Document contains one or more Normative References to a document published by another organization (“other SSO”) engaged in the formulation, development or publication of standards (whether designated as a standard, specification, recommendation or otherwise),

15、whether such reference consists of mandatory, alternate or optional elements (as defined in the TIA Engineering Manual, 4thedition) then (i) TIA disclaims any duty or obligation to search or investigate the records of any other SSO for IPR or letters of assurance relating to any such Normative Refer

16、ence; (ii) TIAs policy of encouragement of voluntary disclosure (see Engineering Manual Section 6.5.1) of Essential Patent(s) and published pending patent applications shall apply; and (iii) Information as to claims of IPR in the records or publications of the other SSO shall not constitute identifi

17、cation to TIA of a claim of Essential Patent(s) or published pending patent applications. TIA does not enforce or monitor compliance with the contents of the Document. TIA does not certify, inspect, test or otherwise investigate products, designs or services or any claims of compliance with the cont

18、ents of the Document. ALL WARRANTIES, EXPRESS OR IMPLIED, ARE DISCLAIMED, INCLUDING WITHOUT LIMITATION, ANY AND ALL WARRANTIES CONCERNING THE ACCURACY OF THE CONTENTS, ITS FITNESS OR APPROPRIATENESS FOR A PARTICULAR PURPOSE OR USE, ITS MERCHANTABILITY AND ITS NONINFRINGEMENT OF ANY THIRD PARTYS INTE

19、LLECTUAL PROPERTY RIGHTS. TIA EXPRESSLY DISCLAIMS ANY AND ALL RESPONSIBILITIES FOR THE ACCURACY OF THE CONTENTS AND MAKES NO REPRESENTATIONS OR WARRANTIES REGARDING THE CONTENTS COMPLIANCE WITH ANY APPLICABLE STATUTE, RULE OR REGULATION, OR THE SAFETY OR HEALTH EFFECTS OF THE CONTENTS OR ANY PRODUCT

20、 OR SERVICE REFERRED TO IN THE DOCUMENT OR PRODUCED OR RENDERED TO COMPLY WITH THE CONTENTS. TIA SHALL NOT BE LIABLE FOR ANY AND ALL DAMAGES, DIRECT OR INDIRECT, ARISING FROM OR RELATING TO ANY USE OF THE CONTENTS CONTAINED HEREIN, INCLUDING WITHOUT LIMITATION ANY AND ALL INDIRECT, SPECIAL, INCIDENT

21、AL OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF BUSINESS, LOSS OF PROFITS, LITIGATION, OR THE LIKE), WHETHER BASED UPON BREACH OF CONTRACT, BREACH OF WARRANTY, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY OR OTHERWISE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE FOREGOING NE

22、GATION OF DAMAGES IS A FUNDAMENTAL ELEMENT OF THE USE OF THE CONTENTS HEREOF, AND THESE CONTENTS WOULD NOT BE PUBLISHED BY TIA WITHOUT SUCH LIMITATIONS. TIA-41-510-E123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960510-1 X.25-BASED DATA TR

23、ANSFER SERVICESPART 5101 X.25-BASED DATA TRANSFER SERVICESThe X.25-based Data Transfer Services are based on the following ISO standards: ISO-8878:1992; Information Technology Telecommunication and Information Exchangebetween Systems Use of X.25 to Provide the OSI Connection-Mode Network Service (wi

24、ththree corrigenda). ISO/EIC 8208:2000 Information Technology Data Communication X.25 Packet Layerprotocol for Data Terminal Equipment. ISO-7776:1995; Information Technology Telecommunication and Information Exchangebetween Systems High-level data link control procedures Description of the X.25 LAPB

25、-compatible DTE data link procedures. ISO/IEC 7776:1995/Amd 1:1996 Modulo 32 768 and multi-selective reject option. ISO/IEC-10030:1995; Information Technology Telecommunication and Information Exchangebetween Systems End System Routeing Information Exchange Protocol for use in conjunctionwith ISO/IE

26、C 8878. ISO/IEC-10177:1993; Information Technology Telecommunication and Information Exchangebetween Systems Provision of the connection-mode Network internal layer service byintermediate systems using ISO/IEC 8208, the X.25 Packet Layer protocol.The ISO references extend ITU-T X.25 with the DTE-DTE connections used in a peer relationshipbetween two MSCs.TIA-41-510-EX.25-BASED DATA TRANSFER SERVICES123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960510-2