SANS 7812-1-2008 Identification cards - Identification of issuers Part 1 Numbering system《识别卡 发卡人识别 第1部分 编号系统》.pdf

《SANS 7812-1-2008 Identification cards - Identification of issuers Part 1 Numbering system《识别卡 发卡人识别 第1部分 编号系统》.pdf》由会员分享，可在线阅读，更多相关《SANS 7812-1-2008 Identification cards - Identification of issuers Part 1 Numbering system《识别卡 发卡人识别 第1部分 编号系统》.pdf（14页珍藏版）》请在麦多课文档分享上搜索。

1、 Collection of SANS standards in electronic format (PDF) 1. Copyright This standard is available to staff members of companies that have subscribed to the complete collection of SANS standards in accordance with a formal copyright agreement. This document may reside on a CENTRAL FILE SERVER or INTRA

2、NET SYSTEM only. Unless specific permission has been granted, this document MAY NOT be sent or given to staff members from other companies or organizations. Doing so would constitute a VIOLATION of SABS copyright rules. 2. Indemnity The South African Bureau of Standards accepts no liability for any

3、damage whatsoever than may result from the use of this material or the information contain therein, irrespective of the cause and quantum thereof. ISBN 978-0-626-21371-8 SANS 7812-1:2008Edition 3ISO/IEC 7812-1:2006Edition 3SOUTH AFRICAN NATIONAL STANDARD Identification cards Identification of issuer

4、s Part 1: Numbering system This national standard is the identical implementation of ISO/IEC 7812-1:2006 and is adopted with the permission of the International Organization for Standardization and the International Electrotechnical Commission. Published by Standards South Africa 1 dr lategan road g

5、roenkloof private bag x191 pretoria 0001 tel: 012 428 7911 fax: 012 344 1568 international code + 27 12 www.stansa.co.za Standards South Africa SANS 7812-1:2008 Edition 3 ISO/IEC 7812-1:2006 Edition 3 Table of changes Change No. Date Scope National foreword This South African standard was approved b

6、y National Committee StanSA SC 71J, Information technology Cards and personal identification, in accordance with procedures of Standards South Africa, in compliance with annex 3 of the WTO/TBT agreement. This SANS document was published in May 2008. This SANS document supersedes SANS 7812-1:2004 (ed

7、ition 2 as modified by ISO/IEC tech. corr. 1:2001). Reference numberISO/IEC 7812-1:2006(E)ISO/IEC 2006INTERNATIONAL STANDARD ISO/IEC7812-1Third edition2006-10-15Identification cards Identification of issuers Part 1: Numbering system Cartes didentification Identification des metteurs Partie 1: Systme

8、 de numrotation SANS 7812-1:2008This s tandard may only be used and printed by approved subscription and freemailing clients of the SABS .ISO/IEC 7812-1:2006(E) PDF disclaimer This PDF file may contain embedded typefaces. In accordance with Adobes licensing policy, this file may be printed or viewed

9、 but shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In downloading this file, parties accept therein the responsibility of not infringing Adobes licensing policy. The ISO Central Secretariat accepts no liability in th

10、is area. Adobe is a trademark of Adobe Systems Incorporated. Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for

11、 use by ISO member bodies. In the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below. ISO/IEC 2006 All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any mea

12、ns, electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISOs member body in the country of the requester. ISO copyright office Case postale 56 CH-1211 Geneva 20 Tel. + 41 22 749 01 11 Fax + 41 22 749 09 47 E-mail copyr

13、ightiso.org Web www.iso.org Published in Switzerland ii ISO/IEC 2006 All rights reservedSANS 7812-1:2008This s tandard may only be used and printed by approved subscription and freemailing clients of the SABS .ISO/IEC 7812-1:2006(E) ISO/IEC 2006 All rights reserved iiiForeword ISO (the International

14、 Organization for Standardization) and IEC (the International Electrotechnical Commission) form the specialized system for worldwide standardization. National bodies that are members of ISO or IEC participate in the development of International Standards through technical committees established by t

15、he respective organization to deal with particular fields of technical activity. ISO and IEC technical committees collaborate in fields of mutual interest. Other international organizations, governmental and non-governmental, in liaison with ISO and IEC, also take part in the work. In the field of i

16、nformation technology, ISO and IEC have established a joint technical committee, ISO/IEC JTC 1. International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2. The main task of the joint technical committee is to prepare International Standards. Draft Intern

17、ational Standards adopted by the joint technical committee are circulated to national bodies for voting. Publication as an International Standard requires approval by at least 75 % of the national bodies casting a vote. Attention is drawn to the possibility that some of the elements of this document

18、 may be the subject of patent rights. ISO and IEC shall not be held responsible for identifying any or all such patent rights. ISO/IEC 7812-1 was prepared by Joint Technical Committee ISO/IEC JTC 1, Information technology, Subcommittee SC 17, Cards and personal identification. This third edition can

19、cels and replaces the second edition (ISO/IEC 7812-1:2000), which has been technically revised. It also incorporates Technical Corrigendum ISO/IEC 7812-1:2000/Cor.1:2001. ISO/IEC 7812 consists of the following parts, under the general title Identification cards Identification of issuers: Part 1: Num

20、bering system Part 2: Application and registration procedures SANS 7812-1:2008This s tandard may only be used and printed by approved subscription and freemailing clients of the SABS .ISO/IEC 7812-1:2006(E) iv ISO/IEC 2006 All rights reservedIntroduction This part of ISO/IEC 7812 is one of a series

21、of International Standards describing the parameters for card issuers and the use of such cards for international, interindustry and/or intra-industry interchange. SANS 7812-1:2008This s tandard may only be used and printed by approved subscription and freemailing clients of the SABS .INTERNATIONAL

22、STANDARD ISO/IEC 7812-1:2006(E) ISO/IEC 2006 All rights reserved 1Identification cards Identification of issuers Part 1: Numbering system 1 Scope This part of ISO/IEC 7812 specifies a numbering system for the identification of issuers of cards that require an issuer identification number (IIN) to op

23、erate in international, interindustry and/or intra-industry interchange. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the reference

24、d document (including any amendments) applies. ISO 3166-1, Codes for the representation of names of countries and their subdivisions Part 1: Country codes ISO/IEC 7812-2, Identification cards Identification of issuers Part 2: Application and registration procedures ISO 8583-1, Financial transaction

25、card originated messages Interchange message specifications Part 1: Messages, data elements and code values ITU-T Rec. E.118, The international telecommunication charge card 3 Terms and definitions For the purposes of this document, the following terms and definitions apply. 3.1 card form factor pro

26、vided by an issuer, including but not limited to ID-1, virtual, thin flexible, single-use, integrated-circuit and mobile devices 3.2 card holder customer associated with the primary account number 3.3 card issuer institution (or its agent) that issues the card to the card holder 3.4 individual accou

27、nt identification number assigned by the card issuer for the purpose of identifying an individual account SANS 7812-1:2008This s tandard may only be used and printed by approved subscription and freemailing clients of the SABS .ISO/IEC 7812-1:2006(E) 2 ISO/IEC 2006 All rights reserved3.5 interchange

28、 exchange of transaction data between two or more entities 3.6 issuer identification number IIN number that identifies the major industry and the card issuer and that forms the first part of the primary account number 3.7 major industry identifier MII first digit of the issuer identification number

29、that identifies the major industry of the card issuer 3.8 primary account number PAN number containing a maximum of 19 digits that identifies the card issuer and the card holder NOTE See 4.1 and Figure 1. 3.9 Registration Authority organization appointed by the ISO Council, responsible for assigning

30、 issuer identification numbers and maintaining the ISO Register of Card Issuer Identification Numbers 3.10 Registration Management Group RMG group established by ISO/IEC JTC 1/SC 17 to act on its behalf in managing the registration and assignment of issuer identification numbers under this part of I

31、SO/IEC 7812 4 Numbering system 4.1 PAN format The PAN on a card (see 3.8) is made up of three main components: a) the IIN (see 4.2); b) the individual account identification (see 4.3); and c) a check digit (see 4.4). See Figure 1 for number format. This part of ISO/IEC 7812 is concerned primarily wi

32、th the first of these components, the IIN. SANS 7812-1:2008This s tandard may only be used and printed by approved subscription and freemailing clients of the SABS .ISO/IEC 7812-1:2006(E) ISO/IEC 2006 All rights reserved 3ISSUER IDENTIFICATION NUMBER INDIVIDUAL ACCOUNT CHECK (fixed length 6 digits)

33、IDENTIFICATION DIGIT MII (see (variable length, max. 12 digits) (see 4.4) 4.2.1) (see 4.3) PRIMARY ACCOUNT NUMBER (PAN) (also referred to as the Identification Number) Figure 1 Composition of the Primary Account Number 4.2 IIN All issuer identification numbers (IINs) issued in accordance with this p

34、art of ISO/IEC 7812 shall be applied for and registered as specified in ISO/IEC 7812-2. Applicants whose applications fulfil the criteria for approval specified in ISO/IEC 7812-2 will be assigned an IIN or, in the case of a block assignment, a block of IINs. 4.2.1 MII There are ten single-digit MIIs

35、: 0 for assignment by ISO/TC 68 and for other future industry assignments 1 airlines 2 airlines and other future industry assignments 3 travel and entertainment and banking/financial 4 banking/financial 5 banking/financial 6 merchandising and banking/financial 7 petroleum and other future industry a

36、ssignments 8 healthcare, telecommunications and other future industry assignments 9 for assignment by national standards bodies New industry assignments shall be approved by the RMG. The MII does not in any way reflect or limit the application in which the card is usable. Single-digit MIIs are assig

37、ned using the applicants description of their main area of business on the application form (see Annex A of ISO/IEC 7812-2:2000). 4.2.2 IINs beginning with “00” Ten thousand IINs in the range “00” have been allocated to ISO/TC 68 for assignment to institutions other than card issuers in order to acc

38、ommodate requirements in ISO 8583-1. Applicants applying for IINs commencing with “00” shall refer to ISO 8583-1, where application procedures and an application form are provided. 4.2.3 IINs beginning with “80” IINs beginning with “80” are for use by healthcare institutions. These IINs are managed

39、by individual national registration authorities. Each national registration authority shall register with the ISO/IEC 7812 Registration Authority so that they can be identified in the ISO Register of Card Issuer Identification Numbers. The format of the entry for the national registration authoritie

40、s shall be “80CCC”, where “80” denotes healthcare and SANS 7812-1:2008This s tandard may only be used and printed by approved subscription and freemailing clients of the SABS .ISO/IEC 7812-1:2006(E) 4 ISO/IEC 2006 All rights reserved“CCC” is the three-digit country code in accordance with ISO 3166-1

41、. The formatting and coding of the digits following “80CCC” is at the discretion of the regional healthcare authorities. Enquiries for details of national healthcare registration authorities may be made to the ISO/IEC 7812 Registration Authority. 4.2.4 IINs beginning with “89” IINs beginning with “8

42、9” are for use by telecommunications administrations and recognized private operating agencies in accordance with ITU-T Rec. E.118. These IINs are maintained by the International Telecommunication Union, and applicants applying for IINs for use on telecommunications cards shall apply for an IIN comm

43、encing with “89”. Enquiries for IINs starting with “89” shall be made to: International Telecommunication Union, Place des Nations, 1211 Geneva 20, Switzerland, Telephone: +41 227 305 211, Fax: + 41 227 337 256. 4.2.5 Major industry identifier 9 (MII 9) MII 9 has been assigned to national standards

44、bodies for national use; it shall be presented as the primary or first digit followed by the three-digit numeric country code as specified in ISO 3166-1. NOTE In the interest of international conformity, national standards bodies are advised to assign IINs in accordance with the recommendations give

45、n in Annex A. 4.3 Individual account identification The individual account identification (see Figure 1) shall be assigned by the card-issuing institution. It immediately follows the IIN and is variable in length with a maximum of 12 digits. 4.4 Check digit The individual account identification (see

46、 4.3) shall be followed by a check digit. This digit shall be calculated on all the preceding digits of the PAN (see Figure 1) and shall be computed according to the Luhn formula for modulus-10 check digit (see Annex B). SANS 7812-1:2008This s tandard may only be used and printed by approved subscri

47、ption and freemailing clients of the SABS .ISO/IEC 7812-1:2006(E) ISO/IEC 2006 All rights reserved 5Annex A (informative) National numbering systems for card issuers A.1 Introduction Major industry identifier 9, (MII 9) has been assigned for use by national standards bodies in order to establish nat

48、ional numbering systems for card issuers. A.2 Role of the Registration Management Group (RMG) The RMG (see 3.9) acting on behalf of the ISO technical body responsible for this part of ISO/IEC 7812-1 shall, on request, provide advice and counsel to any national standards body on the establishment and

49、 operation of a national numbering system. A.3 Contact with the RMG National standards bodies that intend to set up national numbering systems for identification of card issuers are asked to supply the RMG with details of the national procedures for the assignment of IINs, the method used to identify card issuers, and the name of the organization administering the system. The RMG believes that this information may be helpful to countri