SANS 7811-9-2009 Identification cards - Recording technique Part 9 Tactile identifier mark《识别卡 记录技术 第2部分 触觉标识符》.pdf
《SANS 7811-9-2009 Identification cards - Recording technique Part 9 Tactile identifier mark《识别卡 记录技术 第2部分 触觉标识符》.pdf》由会员分享,可在线阅读,更多相关《SANS 7811-9-2009 Identification cards - Recording technique Part 9 Tactile identifier mark《识别卡 记录技术 第2部分 触觉标识符》.pdf(12页珍藏版)》请在麦多课文档分享上搜索。
1、 Collection of SANS standards in electronic format (PDF) 1. Copyright This standard is available to staff members of companies that have subscribed to the complete collection of SANS standards in accordance with a formal copyright agreement. This document may reside on a CENTRAL FILE SERVER or INTRA
2、NET SYSTEM only. Unless specific permission has been granted, this document MAY NOT be sent or given to staff members from other companies or organizations. Doing so would constitute a VIOLATION of SABS copyright rules. 2. Indemnity The South African Bureau of Standards accepts no liability for any
3、damage whatsoever than may result from the use of this material or the information contain therein, irrespective of the cause and quantum thereof. ISBN 978-0-626-22548-3 SANS 7811-9:2009 Edition 1 ISO/IEC 7811-9:2008 Edition 1SOUTH AFRICAN NATIONAL STANDARD Identification cards Recording technique P
4、art 9: Tactile identifier mark This national standard is the identical implementation of ISO/IEC 7811-9:2008 and is adopted with the permission of the International Organization for Standardization and the International Electrotechnical Commission. Published by SABS Standards Division 1 Dr Lategan R
5、oad Groenkloof Private Bag X191 Pretoria 0001 Tel: +27 12 428 7911 Fax: +27 12 344 1568 www.sabs.co.za SABS This standard may only be used and printed by approved subscription and freemailing clients of the SABS.SANS 7811-9:2009 Edition 1 ISO/IEC 7811-9:2008 Edition 1 Table of changes Change No. Dat
6、e Scope National foreword This South African standard was approved by National Committee SABS SC 71J, Information technology Cards and personal identification, in accordance with procedures of the SABS Standards Division, in compliance with annex 3 of the WTO/TBT agreement. This SANS document was pu
7、blished in April 2009. This standard may only be used and printed by approved subscription and freemailing clients of the SABS. Reference number ISO/IEC 7811-9:2008(E) ISO/IEC 2008INTERNATIONAL STANDARD ISO/IEC 7811-9 First edition 2008-06-01 Identification cards Recording technique Part 9: Tactile
8、identifier mark Cartes didentification Technique denregistrement Partie 9: Marque didentificateur tactile SANS 7811-9:2009This standard may only be used and printed by approved subscription and freemailing clients of the SABS.ISO/IEC 7811-9:2008(E) PDF disclaimer This PDF file may contain embedded t
9、ypefaces. In accordance with Adobes licensing policy, this file may be printed or viewed but shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In downloading this file, parties accept therein the responsibility of not in
10、fringing Adobes licensing policy. The ISO Central Secretariat accepts no liability in this area. Adobe is a trademark of Adobe Systems Incorporated. Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation parameters were o
11、ptimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below. COPYRIGHT PROTECTED DOCUMENT ISO/IEC 2008 All rights rese
12、rved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISOs member body in the country of the reques
13、ter. ISO copyright office Case postale 56 CH-1211 Geneva 20 Tel. + 41 22 749 01 11 Fax + 41 22 749 09 47 E-mail copyrightiso.org Web www.iso.org Published in Switzerland ii ISO/IEC 2008 All rights reservedSANS 7811-9:2009This standard may only be used and printed by approved subscription and freemai
14、ling clients of the SABS.ISO/IEC 7811-9:2008(E) ISO/IEC 2008 All rights reserved iii Contents Page Foreword iv 1 Scope. 1 2 Conformance. 1 3 Normative references. 1 4 Terms, definitions and abbreviations. 1 4.1 Terms and definitions. 1 4.2 Abbreviations 1 5 TIM physical characteristics 2 5.1 Locatio
15、n of TIM . 2 5.2 TIM dot arrangement 2 5.3 Dot dimensions . 3 5.4 Sign design 3 SANS 7811-9:2009This standard may only be used and printed by approved subscription and freemailing clients of the SABS.ISO/IEC 7811-9:2008(E) iv ISO/IEC 2008 All rights reservedForeword ISO (the International Organizati
16、on for Standardization) and IEC (the International Electrotechnical Commission) form the specialized system for worldwide standardization. National bodies that are members of ISO or IEC participate in the development of International Standards through technical committees established by the respecti
17、ve organization to deal with particular fields of technical activity. ISO and IEC technical committees collaborate in fields of mutual interest. Other international organizations, governmental and non-governmental, in liaison with ISO and IEC, also take part in the work. In the field of information
18、technology, ISO and IEC have established a joint technical committee, ISO/IEC JTC 1. International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2. The main task of the joint technical committee is to prepare International Standards. Draft International Sta
19、ndards adopted by the joint technical committee are circulated to national bodies for voting. Publication as an International Standard requires approval by at least 75 % of the national bodies casting a vote. Attention is drawn to the possibility that some of the elements of this document may be the
20、 subject of patent rights. ISO and IEC shall not be held responsible for identifying any or all such patent rights. ISO/IEC 7811-9 was prepared by Joint Technical Committee ISO/IEC JTC 1, Information technology, Subcommittee SC 17, Cards and personal identification. ISO/IEC 7811 consists of the foll
21、owing parts, under the general title Identification cards Recording technique: Part 1: Embossing Part 2: Magnetic stripe Low coercivity Part 6: Magnetic stripe High coercivity Part 7: Magnetic stripe High coercivity, high density Part 8: Magnetic stripe Coercivity of 51,7 kA/m (650 Oe) Part 9: Tacti
- 1.请仔细阅读文档,确保文档完整性,对于不预览、不比对内容而直接下载带来的问题本站不予受理。
- 2.下载的文档,不会出现我们的网址水印。
- 3、该文档所得收入(下载+内容+预览)归上传者、原创作者;如果您是本文档原作者,请点此认领!既往收益都归您。
下载文档到电脑,查找使用更方便
10000 积分 0人已下载
下载 | 加入VIP,交流精品资源 |
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- SANS781192009IDENTIFICATIONCARDSRECORDINGTECHNIQUEPART9TACTILEIDENTIFIERMARK 识别 记录 技术 部分 触觉 标识符 PDF
![提示](http://www.mydoc123.com/images/bang_tan.gif)
链接地址:http://www.mydoc123.com/p-1031952.html