SANS 6506-4-2008 Metallic materials - Brinell hardness test Part 4 Table of hardness values《金属材料 布氏硬度试验 第4部分 硬度值表》.pdf

《SANS 6506-4-2008 Metallic materials - Brinell hardness test Part 4 Table of hardness values《金属材料 布氏硬度试验 第4部分 硬度值表》.pdf》由会员分享，可在线阅读，更多相关《SANS 6506-4-2008 Metallic materials - Brinell hardness test Part 4 Table of hardness values《金属材料 布氏硬度试验 第4部分 硬度值表》.pdf（19页珍藏版）》请在麦多课文档分享上搜索。

1、 Collection of SANS standards in electronic format (PDF) 1. Copyright This standard is available to staff members of companies that have subscribed to the complete collection of SANS standards in accordance with a formal copyright agreement. This document may reside on a CENTRAL FILE SERVER or INTRA

2、NET SYSTEM only. Unless specific permission has been granted, this document MAY NOT be sent or given to staff members from other companies or organizations. Doing so would constitute a VIOLATION of SABS copyright rules. 2. Indemnity The South African Bureau of Standards accepts no liability for any

3、damage whatsoever than may result from the use of this material or the information contain therein, irrespective of the cause and quantum thereof. ISBN 978-0-626-20966-7 SANS 6506-4:2008Edition 1ISO 6506-4:2005Edition 1SOUTH AFRICAN NATIONAL STANDARD Metallic materials Brinell hardness test Part 4:

4、Table of hardness values This national standard is the identical implementation of ISO 6506-4:2005 and is adopted with the permission of the International Organization for Standardization. Published by Standards South Africa 1 dr lategan road groenkloof private bag x191 pretoria 0001 tel: 012 428 79

5、11 fax: 012 344 1568 international code + 27 12 www.stansa.co.za Standards South Africa SANS 6506-4:2008 Edition 1 ISO 6506-4:2005 Edition 1 Table of changes Change No. Date Scope National foreword This South African standard was approved by National Committee StanSA SC 5120.20C, Engineering materia

6、ls Mechanical testing of metals, in accordance with procedures of Standards South Africa, in compliance with annex 3 of the WTO/TBT agreement. This SANS document was published in February 2008. Reference numberISO 6506-4:2005(E)ISO 2005INTERNATIONAL STANDARD ISO6506-4First edition2005-12-15Metallic

7、materials Brinell hardness test Part 4: Table of hardness values Matriaux mtalliques Essai de duret Brinell Partie 4: Tableaux pour les essais de duret SANS 6506-4:2008This s tandard may only be used and printed by approved subscription and freemailing clients of the SABS .ISO 6506-4:2005(E) PDF dis

8、claimer This PDF file may contain embedded typefaces. In accordance with Adobes licensing policy, this file may be printed or viewed but shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In downloading this file, parties

9、 accept therein the responsibility of not infringing Adobes licensing policy. The ISO Central Secretariat accepts no liability in this area. Adobe is a trademark of Adobe Systems Incorporated. Details of the software products used to create this PDF file can be found in the General Info relative to

10、the file; the PDF-creation parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below. ISO 2005 All

11、rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISOs member body in the country of

12、 the requester. ISO copyright office Case postale 56 CH-1211 Geneva 20 Tel. + 41 22 749 01 11 Fax + 41 22 749 09 47 E-mail copyrightiso.org Web www.iso.org Published in Switzerland ii ISO 2005 All rights reservedSANS 6506-4:2008This s tandard may only be used and printed by approved subscription and

13、 freemailing clients of the SABS .ISO 6506-4:2005(E) ISO 2005 All rights reserved iiiForeword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out thr

14、ough ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collabo

15、rates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2. Draft International Standards adopted by the technical committees are c

16、irculated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held resp

17、onsible for identifying any or all such patent rights. ISO 6506-4 was prepared by Technical Committee ISO/TC 164, Mechanical testing of metals, Subcommittee SC 3, Hardness testing. This first edition of ISO 6506-4 cancels and replaces Annex C of ISO 6506-1:1999. ISO 6506 consists of the following pa

18、rts, under the general title Metallic materials Brinell hardness test: Part 1: Test method Part 2: Verification and calibration of testing machines Part 3: Calibration of reference blocks Part 4: Table of hardness values SANS 6506-4:2008This s tandard may only be used and printed by approved subscri

19、ption and freemailing clients of the SABS .ISO 6506-4:2005(E) iv ISO 2005 All rights reservedIntroduction Attention is drawn to the fact that in this part of ISO 6506, only the use of the hardmetal ball indenter is specified. The designation of the Brinell hardness is HBW and should not be confused

20、with the former designation HB, or HBS when a steel ball indenter was used. SANS 6506-4:2008This s tandard may only be used and printed by approved subscription and freemailing clients of the SABS .INTERNATIONAL STANDARD ISO 6506-4:2005(E) ISO 2005 All rights reserved 1Metallic materials Brinell har

21、dness test Part 4: Table of hardness values 1 Scope This part of ISO 6506 gives a table of the Brinell hardness values for use in tests on flat surfaces. 2 Determination of the Brinell hardness for testing on flat surfaces See Table 1. Table 1 Ball indenter, D mm Force-diameter ratio, 0,102 F/D230 1

22、5 10 5 2,5 1 Test force, F 10 29,42 kN 14,71 kN 9,807 kN 4,903 kN 2,452 kN 980,7 N 5 7,355 kN 2,452 kN 1,226 kN 612,9 N 245,2 N 2,5 1,839 kN 612,9 N 306,5 N 153,2 N 61,29 N 1 294,2 N 98,07 N 49,03 N 24,52 N 9,807 N Mean diameter of the indentation, d mm Brinell hardness, HBW 2,40 1,200 0,600 0 0,240

23、 653 327 218 109 54,5 21,8 2,41 1,205 0,602 4 0,241 648 324 216 108 54,0 21,6 2,42 1,210 0,605 0 0,242 643 321 214 107 53,5 21,4 2,43 1,215 0,607 5 0,243 637 319 212 106 53,1 21,2 2,44 1,220 0,610 0 0,244 632 316 211 105 52,7 21,1 2,45 1,225 0,612 5 0,245 627 313 209 104 52,2 20,9 2,46 1,230 0,615 0

24、 0,246 621 311 207 104 51,8 20,7 2,47 1,235 0,617 5 0,247 616 308 205 103 51,4 20,5 2,48 1,240 0,620 0 0,248 611 306 204 102 50,9 20,4 2,49 1,245 0,622 5 0,249 606 303 202 101 50,5 20,2 2,50 1,250 0,625 0 0,250 601 301 200 100 50,1 20,0 2,51 1,255 0,627 5 0,251 597 298 199 99,4 49,7 19,9 SANS 6506-4

25、:2008This s tandard may only be used and printed by approved subscription and freemailing clients of the SABS .ISO 6506-4:2005(E) 2 ISO 2005 All rights reservedTable 1 (continued) Ball indenter, D mm Force-diameter ratio, 0,102 F/D210 5 2,5 1 30 15 10 5 2,5 1 Mean diameter of the indentation, d mm B

26、rinell hardness, HBW 2,52 1,260 0,630 0 0,252 592 296 197 98,6 49,3 19,7 2,53 1,265 0,632 5 0,253 587 294 196 97,8 48,9 19,6 2,54 1,270 0,635 0 0,254 582 291 194 97,1 48,5 19,4 2,55 1,275 0,637 5 0,255 578 289 193 96,3 48,1 19,3 2,56 1,280 0,640 0 0,256 573 287 191 95,5 47,8 19,1 2,57 1,285 0,642 5

27、0,257 569 284 190 94,8 47,4 19,0 2,58 1,290 0,645 0 0,258 564 282 188 94,0 47,0 18,8 2,59 1,295 0,647 5 0,259 560 280 187 93,3 46,6 18,7 2,60 1,300 0,650 0 0,260 555 278 185 92,6 46,3 18,5 2,61 1,305 0,652 5 0,261 551 276 184 91,8 45,9 18,4 2,62 1,310 0,655 0 0,262 547 273 182 91,1 45,6 18,2 2,63 1,

28、315 0,657 5 0,263 543 271 181 90,4 45,2 18,1 2,64 1,320 0,660 0 0,264 538 269 179 89,7 44,9 17,9 2,65 1,325 0,662 5 0,265 534 267 178 89,0 44,5 17,8 2,66 1,330 0,665 0 0,266 530 265 177 88,4 44,2 17,7 2,67 1,335 0,667 5 0,267 526 263 175 87,7 43,8 17,5 2,68 1,340 0,670 0 0,268 522 261 174 87,0 43,5

29、17,4 2,69 1,345 0,672 5 0,269 518 259 173 86,4 43,2 17,3 2,70 1,350 0,675 0 0,270 514 257 171 85,7 42,9 17,1 2,71 1,355 0,677 5 0,271 510 255 170 85,1 42,5 17,0 2,72 1,360 0,680 0 0,272 507 253 169 84,4 42,2 16,9 2,73 1,365 0,682 5 0,273 503 251 168 83,8 41,9 16,8 2,74 1,370 0,685 0 0,274 499 250 16

30、6 83,2 41,6 16,6 2,75 1,375 0,687 5 0,275 495 248 165 82,6 41,3 16,5 2,76 1,380 0,690 0 0,276 492 246 164 81,9 41,0 16,4 2,77 1,385 0,692 5 0,277 488 244 163 81,3 40,7 16,3 2,78 1,390 0,695 0 0,278 485 242 162 80,8 40,4 16,2 2,79 1,395 0,697 5 0,279 481 240 160 80,2 40,1 16,0 2,80 1,400 0,700 0 0,28

31、0 477 239 159 79,6 39,8 15,9 2,81 1,405 0,702 5 0,281 474 237 158 79,0 39,5 15,8 2,82 1,410 0,705 0 0,282 471 235 157 78,4 39,2 15,7 2,83 1,415 0,707 5 0,283 467 234 156 77,9 38,9 15,6 2,84 1,420 0,710 0 0,284 464 232 155 77,3 38,7 15,5 2,85 1,425 0,712 5 0,285 461 230 154 76,8 38,4 15,4 SANS 6506-4

32、:2008This s tandard may only be used and printed by approved subscription and freemailing clients of the SABS .ISO 6506-4:2005(E) ISO 2005 All rights reserved 3Table 1 (continued) Ball indenter, D mm Force-diameter ratio, 0,102 F/D210 5 2,5 1 30 15 10 5 2,5 1 Mean diameter of the indentation, d mm B

33、rinell hardness, HBW 2,86 1,430 0,715 0 0,286 457 229 152 76,2 38,1 15,2 2,87 1,435 0,717 5 0,287 454 227 151 75,7 37,8 15,1 2,88 1,440 0,720 0 0,288 451 225 150 75,1 37,6 15,0 2,89 1,445 0,722 5 0,289 448 224 149 74,6 37,3 14,9 2,90 1,450 0,725 0 0,290 444 222 148 74,1 37,0 14,8 2,91 1,455 0,727 5

34、0,291 441 221 147 73,6 36,8 14,7 2,92 1,460 0,730 0 0,292 438 219 146 73,0 36,5 14,6 2,93 1,465 0,732 5 0,293 435 218 145 72,5 36,3 14,5 2,94 1,470 0,735 0 0,294 432 216 144 72,0 36,0 14,4 2,95 1,475 0,737 5 0,295 429 215 143 71,5 35,8 14,3 2,96 1,480 0,740 0 0,296 426 213 142 71,0 35,5 14,2 2,97 1,

35、485 0,742 5 0,297 423 212 141 70,5 35,3 14,1 2,98 1,490 0,745 0 0,298 420 210 140 70,1 35,0 14,0 2,99 1,495 0,747 5 0,299 417 209 139 69,6 34,8 13,9 3,00 1,500 0,750 0 0,300 415 207 138 69,1 34,6 13,8 3,01 1,505 0,752 5 0,301 412 206 137 68,6 34,3 13,7 3,02 1,510 0,755 0 0,302 409 205 136 68,2 34,1

36、13,6 3,03 1,515 0,757 5 0,303 406 203 135 67,7 33,9 13,5 3,04 1,520 0,760 0 0,304 404 202 135 67,3 33,6 13,5 3,05 1,525 0,762 5 0,305 401 200 134 66,8 33,4 13,4 3,06 1,530 0,765 0 0,306 398 199 133 66,4 33,2 13,3 3,07 1,535 0,767 5 0,307 395 198 132 65,9 33,0 13,2 3,08 1,540 0,770 0 0,308 393 196 13

37、1 65,5 32,7 13,1 3,09 1,545 0,772 5 0,309 390 195 130 65,0 32,5 13,0 3,10 1,550 0,775 0 0,310 388 194 129 64,6 32,3 12,9 3,11 1,555 0,777 5 0,311 385 193 128 64,2 32,1 12,8 3,12 1,560 0,780 0 0,312 383 191 128 63,8 31,9 12,8 3,13 1,565 0,782 5 0,313 380 190 127 63,3 31,7 12,7 3,14 1,570 0,787 0 0,31

38、4 378 189 126 62,9 31,5 12,6 3,15 1,575 0,787 5 0,315 375 188 125 62,5 31,3 12,5 3,16 1,580 0,790 0 0,316 373 186 124 62,1 31,1 12,4 3,17 1,585 0,792 5 0,317 370 185 123 61,7 30,9 12,3 3,18 1,590 0,795 0 0,318 368 184 123 61,3 30,7 12,3 3,19 1,595 0,797 5 0,319 366 183 122 60,9 30,5 12,2 SANS 6506-4

39、:2008This s tandard may only be used and printed by approved subscription and freemailing clients of the SABS .ISO 6506-4:2005(E) 4 ISO 2005 All rights reservedTable 1 (continued) Ball indenter, D mm Force-diameter ratio, 0,102 F/D210 5 2,5 1 30 15 10 5 2,5 1 Mean diameter of the indentation, d mm B

40、rinell hardness, HBW 3,20 1,600 0,800 0 0,320 363 182 121 60,5 30,3 12,1 3,21 1,605 0,802 5 0,321 361 180 120 60,1 30,1 12,0 3,22 1,610 0,805 0 0,322 359 179 120 59,8 29,9 12,0 3,23 1,615 0,807 5 0,323 356 178 119 59,4 29,7 11,9 3,24 1,620 0,810 0 0,324 354 177 118 59,0 29,5 11,8 3,25 1,625 0,812 5

41、0,325 352 176 117 58,6 29,3 11,7 3,26 1,630 0,815 0 0,326 350 175 117 58,3 29,1 11,7 3,27 1,635 0,817 5 0,327 347 174 116 57,9 29,0 11,6 3,28 1,640 0,820 0 0,328 345 173 115 57,5 28,8 11,5 3,29 1,645 0,822 5 0,329 343 172 114 57,2 28,6 11,4 3,30 1,650 0,825 0 0,330 341 170 114 56,8 28,4 11,4 3,31 1,

42、655 0,827 5 0,331 339 169 113 56,5 28,2 11,3 3,32 1,660 0,830 0 0,332 337 168 112 56,1 28,1 11,2 3,33 1,665 0,832 5 0,333 335 167 112 55,8 27,9 11,2 3,34 1,670 0,835 0 0,334 333 166 111 55,4 27,7 11,1 3,35 1,675 0,837 5 0,335 331 165 110 55,1 27,5 11,0 3,36 1,680 0,840 0 0,336 329 164 110 54,8 27,4

43、11,0 3,37 1,685 0,842 5 0,337 326 163 109 54,4 27,2 10,9 3,38 1,690 0,845 0 0,338 325 162 108 54,1 27,0 10,8 3,39 1,695 0,847 5 0,339 323 161 108 53,8 26,9 10,8 3,40 1,700 0,850 0 0,340 321 160 107 53,4 26,7 10,7 3,41 1,705 0,852 5 0,341 319 159 106 53,1 26,6 10,6 3,42 1,710 0,855 0 0,342 317 158 10

44、6 52,8 26,4 10,6 3,43 1,715 0,857 5 0,343 315 157 105 52,5 26,2 10,5 3,44 1,720 0,860 0 0,344 313 156 104 52,2 26,1 10,4 3,45 1,725 0,862 5 0,345 311 156 104 51,8 25,9 10,4 3,46 1,730 0,865 0 0,346 309 155 103 51,5 25,8 10,3 3,47 1,735 0,867 5 0,347 307 154 102 51,2 25,6 10,2 3,48 1,740 0,870 0 0,34

45、8 306 153 102 50,9 25,5 10,2 3,49 1,745 0,872 5 0,349 304 152 101 50,6 25,3 10,1 3,50 1,750 0,875 0 0,350 302 151 101 50,3 25,2 10,1 3,51 1,755 0,877 5 0,351 300 150 100 50,0 25,0 10,0 3,52 1,760 0 880 0 0,352 298 149 99,5 49,7 24,9 9,95 3,53 1,765 0,882 5 0,353 297 148 98,9 49,4 24,7 9,89 SANS 6506

46、-4:2008This s tandard may only be used and printed by approved subscription and freemailing clients of the SABS .ISO 6506-4:2005(E) ISO 2005 All rights reserved 5Table 1 (continued) Ball indenter, D mm Force-diameter ratio, 0,102 F/D210 5 2,5 1 30 15 10 5 2,5 1 Mean diameter of the indentation, d mm

47、 Brinell hardness, HBW 3,54 1,770 0,885 0 0,354 295 147 98,3 49,2 24,6 9,83 3,55 1,775 0,887 5 0,355 293 147 97,7 48,9 24,4 9,77 3,56 1,780 0,890 0 0,356 292 146 97,2 48,6 24,3 9,72 3,57 1,785 0,892 5 0,357 290 145 96,6 48,3 24,2 9,66 3,58 1,790 0,895 0 0,358 288 144 96,1 48,0 24,0 9,61 3,59 1,795 0

48、,897 5 0,359 286 143 95,5 47,7 23,9 9,55 3,60 1,800 0,900 0 0,360 285 142 95,0 47,5 23,7 9,50 3,61 1, 805 0,902 5 0,361 283 142 94,4 47,2 23,6 9,44 3,62 1,810 0,905 0 0,362 282 141 93,9 46,9 23,5 9,39 3,63 1,815 0,907 5 0,363 280 140 93,3 46,7 23,3 9,33 3,64 1,820 0,910 0 0,364 278 139 92,8 46,4 23,

49、2 9,28 3,65 1,825 0,912 5 0,365 277 138 92,3 46,1 23,1 9,23 3,66 1,830 0,915 0 0,366 275 138 91,8 45,9 22,9 9,18 3,67 1,835 0,917 5 0,367 274 137 91,2 45,6 22,8 9,12 3,68 1,840 0,920 0 0,368 272 136 90,7 45,4 22,7 9,07 3,69 1,845 0,922 5 0,369 271 135 90,2 45,1 22,6 9,02 3,70 1,850 0,925 0 0,370 269 135 89,7 44,9 22,4 8,97 3,71 1,855 0,927 5 0,371 268 134 89,2 44,6 22,3 8,92 3,72 1,860 0,930 0 0,372 266 133 88,7 44,4 22,2 8,87 3,73 1,865 0,932 5 0,373 265 132 88,2 44,1 22,1 8,82 3,74 1,870 0,935 0 0,374