SANS 50133-2003 Respiratory protective devices - Classification《呼吸防护装置 分类》.pdf

《SANS 50133-2003 Respiratory protective devices - Classification《呼吸防护装置 分类》.pdf》由会员分享，可在线阅读，更多相关《SANS 50133-2003 Respiratory protective devices - Classification《呼吸防护装置 分类》.pdf（12页珍藏版）》请在麦多课文档分享上搜索。

1、 Collection of SANS standards in electronic format (PDF) 1. Copyright This standard is available to staff members of companies that have subscribed to the complete collection of SANS standards in accordance with a formal copyright agreement. This document may reside on a CENTRAL FILE SERVER or INTRA

2、NET SYSTEM only. Unless specific permission has been granted, this document MAY NOT be sent or given to staff members from other companies or organizations. Doing so would constitute a VIOLATION of SABS copyright rules. 2. Indemnity The South African Bureau of Standards accepts no liability for any

3、damage whatsoever than may result from the use of this material or the information contain therein, irrespective of the cause and quantum thereof. ICS 13.340.30 ISBN 0-626-14638-0 SANS 50133:2003 Edition 2 EN 133:2001 Edition 3 SOUTH AFRICAN NATIONAL STANDARD Respiratory protective devices Classific

4、ation This national standard is the identical implementation of EN 133:2001 and is adopted with the permission of CEN, rue de Stassart 36, B-1050 Brussels. Published by Standards South Africa 1 dr lategan road groenkloof ! private bag x191 pretoria 0001 tel: 012 428 7911 fax: 012 344 1568 internatio

5、nal code + 27 12 www.stansa.co.za Standards South Africa 2003 SANS 50133:2003 Edition 2 EN 133:2001 Edition 3 Table of changes Change No. Date Scope National foreword This South African standard was approved by National Committee STANSA TC 5120.11D, Respiratory equipment, in accordance with procedur

6、es of Standards South Africa, in compliance with annex 3 of the WTO/TBT agreement. This edition cancels and replaces the first edition (SABS EN 133:1990). EUROPEAN STANDARDNORME EUROPENNEEUROPISCHE NORMEN 133October 2001ICS 13.340.30 Supersedes EN 133:1990English versionRespiratory protective device

7、s - ClassificationAppareils de protection respiratoire - Classification Atemschutzgerte - EinteilungThis European Standard was approved by CEN on 2 September 2001.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard

8、 the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German)

9、. A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, F

10、rance, Germany, Greece,Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMIT EUROPEN DE NORMALISATIONEUROPISCHES KOMITEE FR NORMUNGManagement Centre: rue de Stassart, 36 B-1050 Brussels 2001 CEN A

11、ll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 133:2001 EEN 133:2001 (E)2ContentspageForeword31 Scope 42 Normative references 43 Classification53.1 General classification53.2 Filtering devices (see Table 1)63.3 Breathing apparatus (see T

12、able 2) .7Annex ZA (informative) Clauses of this European Standard addressing essential requirements orother provisions of EU Directives 9EN 133:2001 (E)3ForewordThis document has been prepared by Technical Committee CEN/TC 79, “Respiratory protective devices“, thesecretariat of which is held by DIN

13、.This documents supersedes EN 133:1990.This European Standard shall be given the status of a national standard, either by publication of an identical text orby endorsement, at the latest by April 2002, and conflicting national standards shall be withdrawn at the latest byApril 2002.This European Sta

14、ndard has been prepared under a mandate given to CEN by the European Commission and theEuropean Free Trade Association, and supports essential requirements of EU Directive 89/686/EEC.For relationship with EU Directive(s), see informative annex ZA, which is an integral part of this standard.According

15、 to the CEN/CENELEC Internal Regulations, the national standards organizations of the followingcountries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland,France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spai

16、n, Sweden,Switzerland and the United Kingdom.EN 133:2001 (E)41 ScopeThis European Standard classifies respiratory protective devices (RPD) according to their basic design, i.e. ageneral logical grouping of the RPD.This European standard is intended to serve as a basic introductory reference for user

17、s and for the preparation andrevision of European Standards on respiratory protective devices.2 Normative referencesThis European Standard incorporates, by dated or undated reference, provisions from other publications. Thesenormative references are cited at the appropriate places in the text and th

18、e publications are listed hereafter. Fordated references, subsequent amendments to or revisions of any of these publications apply to this EuropeanStandard only when incorporated in it by amendment or revision. For undated references the latest edition of thepublication referred to applies (includin

19、g amendments).EN 132, Respiratory protective devices - Definitions of terms and pictograms.EN 136, Respiratory protective devices - Full face masks Requirements, testing, marking.EN 137, Respiratory protective devices - Self-contained open-circuit compressed air breathing apparatus Requirements, tes

20、ting, marking.EN 138, Respiratory protective devices - Fresh air hose breathing apparatus for use with full face mask, half maskof mouthpiece assembly - Requirements, testing, marking.EN 139, Respiratory protective devices - Compressed air line breathing apparatus for use with a full face mask, half

21、mask or mouthpiece assembly Requirements, testing, marking.EN 140, Respiratory protective devices Half masks and quarter masks Requirements, testing, marking.EN 141, Respiratory protective devices - Gas filters and combined filters Requirements, testing, marking.EN 142, Respiratory protective device

22、s - Mouthpiece assemblies Requirements, testing, marking.EN 143, Respiratory protective devices - Particle filters Requirements, testing, marking.EN 145, Respiratory protective devices - Self-contained closed-circuit breathing apparatus compressed oxygen orcompressed oxygen-nitrogen type Requirement

23、s, testing, marking.EN 149, Respiratory protective devices - Filtering half masks to protect against particles Requirements, testing,marking.EN 250, Respiratory equipment - Open-circuit self-contained compressed air diving apparatus Requirements,testing, marking.EN 269, Respiratory protective device

24、s - Powered fresh air hose breathing apparatus incorporating a hood Requirements, testing, marking.EN 270, Respiratory protective devices - Compressed air line breathing apparatus incorporating a hood Requirements, testing, marking.EN 271, Respiratory protective devices - Compressed air line or powe

25、red fresh air hose breathing apparatusincorporating a hood for use in abrasive blasting operations Requirements, testing, marking.EN 133:2001 (E)5EN 371, Respiratory protective devices - AX gas filters and combined filters against low boiling organic compounds- Requirements, testing, marking.EN 372,

26、 Respiratory protective devices - SX gas filters and combined filters against specific named compounds Requirements, testing, marking.EN 400, Respiratory protective devices for self-rescue - Self-contained closed-circuit breathing apparatus -Compressed oxygen escape apparatus Requirements, testing,

27、marking.EN 401, Respiratory protective devices for self-rescue - Self-contained closed-circuit breathing apparatus -Chemical oxygen (KO2) escape apparatus Requirements, testing, marking.EN 402, Respiratory protective devices for escape - Self-contained open-circuit compressed air breathingapparatus

28、with full face mask or mouthpiece assembly Requirements, testing, marking.EN 403, Respiratory protective devices for self-rescue - Filtering devices with hood for self-rescue from fire Requirements, testing, marking.EN 404, Respiratory protective devices for self-rescue - Filter self-rescuers Requir

29、ements, testing, marking.EN 405, Respiratory protective devices - Valved filtering half masks to protect against gases or gases and particles- Requirements, testing, marking.EN 1061, Respiratory protective devices for self-rescue - Self-contained closed-circuit breathing apparatus -Chemical oxygen (

30、NaClO3) escape apparatus Requirements, testing, marking.EN 1146, Respiratory protective devices for self-rescue - Self-contained open-circuit compressed air breathingapparatus incorporating a hood (compressed air escape apparatus with hood) Requirements, testing, marking.EN 1827, Respiratory protect

31、ive devices - Half masks without inhalation valves and with separable filters to protectagainst gases or gases and particles or particles only Requirements, testing, marking.EN 1835, Respiratory protective devices - Light duty construction compressed air line breathing apparatusincorporating a helme

32、t or a hood Requirements, testing, marking.EN 12021, Respiratory protective devices - Compressed air for breathing apparatus.EN 12083, Respiratory protective devices Filters with breathing hoses (Non-mask mounted filters) Particlefilters, gas filters and combined filters Requirements, testing, marki

33、ng.EN 12419, Respiratory protective devices - Light duty construction compressed air line breathing apparatusincorporating a full face mask, half mask or quarter mask Requirements, testing, marking.EN 12941, Respiratory protective devices - Powered filtering devices incorporating a helmet or a hood

34、Requirements, testing, marking.EN 12942, Respiratory protective devices Power assisted filtering devices incorporating full face masks, halfmasks or quarter masks Requirements, testing, marking.3 Classification3.1 General classificationThere are two distinct methods of providing personal respiratory

35、 protection:by purifying the ambient air to be breathed using filters able to remove contaminants in the air - filteringdevices orby supplying the wearer with breathable gas from an uncontaminated source - breathing apparatus.EN 133:2001 (E)6In general a respiratory protective device consists of two

36、 main components, a facepiece and filter(s) or a facepieceand a means of providing uncontaminated breathable gas. The facepiece directs this breathable gas to thewearers nose and mouth area.The facepiece can be a mask, filtering facepiece, hood, mouthpiece, helmet etc.The airflow through filter(s) m

37、ay be assisted or unassisted.The means of supplying breathable gas may consist of pressure cylinders, compressed air line system, freshair supply system, or another suitable supply system.Following this, RPDs are classified according to Figure 1.Respiratory protective devicesFiltering devices(depend

38、ent on ambient atmosphere)Breathing apparatus(independent of ambientatmosphere)Facepiece+Filter(s)Facepiece+Breathable gas supply systemFigure 1 The major classes of respiratory protective devices3.2 Filtering devices (see Table 1)Filtering devices remove contaminants from the ambient air by filtrat

39、ion and can only protect against limitedconcentration ranges of known contaminants in the air if a suitable filter and facepiece are chosen.The filters in filtering devices can be for protection against particles (particle filters), gases/vapours (gas filters), orfor protection against particles and

40、 gases/vapours (combined filters).Filtering devices do not give protection against oxygen deficiency.Particle filters are divided in the following classes:1 Low efficiency filters;2 Medium efficiency filters;3 High efficiency filters.Gas filters are divided in the following classes:1 Low capacity fi

41、lters;2 Medium capacity filters;EN 133:2001 (E)73 High capacity filters.and further divided in types according to the gases they protect against e.g. filter types A, B, E or K according to theclassification of the appropriate European Standards.Filters can be combined filters or multi type gas filte

42、rs (see EN 132).Table 1 Filtering devices and relevant EN standardsGas filters and combined filters EN 141Particle filters EN 143AX gas filters and combined filters against lowboiling organic compoundsEN 371SX gas filters and combined filters againstspecific named compoundsEN 372Filters to be usedwi

43、th full face mask(EN 136), half maskand quarter mask(EN 140) ormouthpieceassemblies(EN 142)Filters with breathing hoses (Non maskmounted filters) Particle filters, gas filters andcombined filtersEN 12083Filtering half masks to protect against particles EN 149Valved filtering half masks to protect ag

44、ainstgases or gases and particlesEN 405FilteringfacepiecesHalf masks without inhalation valves and withseparable filter to protect against gases or gasesand particles or particles onlyEN 1827Filtering devices with hood for self-rescue fromfireEN 403Un-assistedSelf-rescuerFilter self-rescuers EN 404P

45、owered filtering devices incorporating helmet orhoodEN 12941AssistedPower assisted filtering devices incorporating fullface mask, half mask or quarter maskEN 12942Facepieces are specified in EN 136 (full face mask), EN 140 (half masks) and EN 142 (mouthpiece assemblies).Helmets and hoods are specifi

46、ed in the relevant product standards.3.3 Breathing apparatus (see Table 2)Breathing apparatus isolate the user from the ambient air and supply breathable air or gas suitable for saferespiration. Breathing apparatus protect against oxygen deficiency in the ambient air as well as contaminants(known or

47、 unknown) in the ambient air.EN 12021 provides guidance for suitable air quality for use in breathing apparatus.Diving apparatus is also considered as breathing apparatus.EN 133:2001 (E)8Table 2 Breathing apparatus and relevant EN standardsFresh air hose breathing apparatus for use with fullface mas

48、k, half mask or mouth piece assemblyUnassisted or manually assisted.EN 138Fresh air hosebreathingapparatusPowered fresh air hose breathing apparatusincorporating a hoodEN 269Compressed air line breathing apparatus for use withfull face mask, half mask or mouthpiece assemblyEN 139Compressed air line

49、breathing apparatus incorporatinga hoodEN 270Compressed air line or powered fresh air hosebreathing apparatus incorporating a hood for use inabrasive blasting operationsEN 271Not self-containedCompressedair linebreathingapparatusLight duty compressed air line breathing apparatusincorporating a helmet or a hoodEN 1835Light duty construction compressed air line breathingapparatus incorporating a full face mask, half mask orquarter maskEN 12419Self-contained open-circuit compressed air breathingapparatusEN 137Open