SANS 50081-2-1998 Safety rules for the construction and installation of lifts Part 2 Hydraulic lifts《电梯建设及安装安全规则 第2部分 液压电梯》.pdf

《SANS 50081-2-1998 Safety rules for the construction and installation of lifts Part 2 Hydraulic lifts《电梯建设及安装安全规则 第2部分 液压电梯》.pdf》由会员分享，可在线阅读，更多相关《SANS 50081-2-1998 Safety rules for the construction and installation of lifts Part 2 Hydraulic lifts《电梯建设及安装安全规则 第2部分 液压电梯》.pdf（290页珍藏版）》请在麦多课文档分享上搜索。

1、 Collection of SANS standards in electronic format (PDF) 1. Copyright This standard is available to staff members of companies that have subscribed to the complete collection of SANS standards in accordance with a formal copyright agreement. This document may reside on a CENTRAL FILE SERVER or INTRA

2、NET SYSTEM only. Unless specific permission has been granted, this document MAY NOT be sent or given to staff members from other companies or organizations. Doing so would constitute a VIOLATION of SABS copyright rules. 2. Indemnity The South African Bureau of Standards accepts no liability for any

3、damage whatsoever than may result from the use of this material or the information contain therein, irrespective of the cause and quantum thereof. ICS 91.140.90 ISBN 0-626-17635-2 SANS 50081-2:1998Edition 1 and EN corr., and EN amdts A2, A1, nat. amdt 1EN 81-2:1998Edition 2 and corr., and amdts A2,

4、A1Any reference to SABS EN 81-2 is deemedto be a reference to this standard(Government Notice No. 1373 of 8 November 2002)SOUTH AFRICAN NATIONAL STANDARD Safety rules for the construction and installation of lifts Part 2: Hydraulic lifts This national standard is the identical implementation of EN 8

5、1-2:1998 and EN corrigendum, and EN amendments A2, A1, and is adopted with the permission of CEN, rue de Stassart 36, B-1050 Brussels. WARNING Refer to the national foreword in this standard for a reference to a front-end standard Published by Standards South Africa 1 dr lategan road groenkloof priv

6、ate bag x191 pretoria 0001 tel: 012 428 7911 fax: 012 344 1568 international code +27 12 www.stansa.co.za Standards South Africa SANS 50081-2:1998 Edition 1 and EN corr., and EN amdts A2, A1, nat. amdt 1 EN 81-2:1998 Edition 2 and corr., and amdts A2, A1 Table of changes Change No. Date Scope EN cor

7、r. 1999 Changed to correct a reference in the subclause on partially enclosed well (5.2.1.2), to add a reference in the subclause on strength of the walls (5.3.1.1), to correct wording in the subclause on lighting of the well (5.9), to correct the figure on examples of locking elements (figure 3), t

8、o correct a reference in the subclause on precautions against free fall, descent with excessive speed and creeping of the car (9.5), to correct the title of the clause on clearances between car and wall facing the car entrance, and between car, balancing weight or balancing weight (11), to correct t

9、he title of the subclause on clearances between car, balancing weight or balancing weight (11.3), to correct a reference in the subclause on electrical anti-creep system (14.2.1.5), to correct references in the subclause on technical details and plans (C.3), to correct a formula in the figure on hyd

10、raulic fluid flow through, pressure before and after the rupture valve (figure F.2), to correct figures in the clause on examples of calculation method (G.7), to correct a formula in the subclause on bending stress (G.7.5.1.1), to correct a reference in the subclause on general (J.1) in the annex on

11、 pendulum shock tests, and to correct a term in the second note to the annex on clauses of this standard addressing essential requirements or other provisions of EU directives. EN amdt A2 2004 Amended to change or add text to the foreword and the introduction, to add new definitions, to change text

12、in the clauses on lift well (5), machine and pulley rooms (6), lift machine (12), electric installations and appliances (13), protection against electric faults; controls; priorities (14), notices, markings and operating instructions (15), examinations tests register maintenance (16), and to add and

13、 change text in the annexes on list of the electric safety devices (annex A), technical dossier (annex C), examinations and tests before putting into service (annex D), periodical examinations and tests, examinations and tests after an important modification or after an accident (annex E), machinery

14、 spaces access (6.1) (annex L), and clauses of this standard addressing essential requirements or other provisions of EU directives (annex ZA). EN amdt A1 2005 Amended to change text in the introduction, to change normative references, to change definitions, to change text in the clauses on protecti

15、on against electric faults; controls; priorities (14), and examinations tests register maintenance (16), to change text in the annexes on list of the electric safety devices (annex A), and safety components tests procedures for verification of conformity (annex F), to add a new annex M on descriptio

16、n of possible measures, and to change text in the annex on clauses of this standard addressing essential requirements or other provisions of EU directives (annex ZA). Nat. amdt 1 2006 Amended to change the designation from SABS to SANS, with no technical changes. SANS 50081-2:1998 Edition 1 and EN c

17、orr., and EN amdts A2, A1, nat. amdt 1 EN 81-2:1998 Edition 2 and corr., and amdts A2, A1 Abstract Specifies the safety rules for the construction and installation of permanently installed new hydraulic lifts serving defined landing levels, having a car designed for the transportation of persons or

18、persons and goods, suspended by jacks, ropes or chains and moving between guide rails inclined not more than 15 to the vertical. In addition, supplementary requirements are considered in special cases (potentially explosive atmosphere, extreme climate conditions, seismic conditions, transporting dan

19、gerous goods, etc.). Keywords acceptance (approval), construction, definitions, design, hoists, hydraulic equipment, hydraulic lifts, inspection, installation, lifting equipment, lifts, passenger lifts, safety, safety measures, specifications. National foreword This South African standard was approv

20、ed by National Committee StanSA SC 5120.50B, Lifts, escalators and passenger conveyors Lifts other than domestic lifts, in accordance with procedures of Standards South Africa, in compliance with annex 3 of the WTO/TBT agreement. This SANS edition is technically identical to SABS EN 81-2:1998, with

21、the addition of EN corrigendum, EN amendments A2 and A1, and national amendment 1. Users of SANS 50081-2 should note that an SANS standard (SANS 1545-2) exists, which is based on SANS 50081-2, but which has additional information regarding the application of SANS 50081-2 in the South African environ

22、ment. SANS 1545-2 is a front-end standard. Deviations from the international requirements in this standard are given in SANS 1545-2. In the case of dispute, SANS 1545-2 will take precedence over this standard. This page is intentionally left blankEUROPEAN STANDARDNORME EUROPENNEEUROPISCHE NORMEN 81-

23、2:1998/A1November 2005ICS 91.140.90English VersionSafety rules for the construction and installation of lifts - Part 2:Hydraulic liftsRgles de scurit pour la construction et linstallation deslvateurs - Partie 2: Ascenseurs hydrauliquesSicherheitsregeln fr die Konstruktion und den Einbau vonAufzgen -

24、 Teil 2: Hydraulisch betriebene Personen- undLastenaufzgeThis amendment A1 modifies the European Standard EN 81-2:1998; it was approved by CEN on 13 May 2005.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of thisamendment into t

25、he relevant national standard without any alteration. Up-to-date lists and bibliographical references concerning suchnational standards may be obtained on application to the Central Secretariat or to any CEN member.This amendment exists in three official versions (English, French, German). A version

26、 in any other language made by translation under theresponsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, F

27、inland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMIT EUROPEN DE NORMALISATIONEUROPISCHES KOMITEE FR N

28、ORMUNGManagement Centre: rue de Stassart, 36 B-1050 Brussels 2005 CEN All rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 81-2:1998/A1:2005: EEN 81-2:1998/A1:2005 (E) 2 Contents Page Foreword 3 1 Modifications in Clause 0 .4 2 Modifications

29、in Clause 2 .4 3 Modifications in Clause 3 .4 4 Modifications in Clause 14 .5 5 Modifications in Clause 16 .11 6 Modifications in Annex A .12 7 Modifications in Annex F13 8 Amended Annex M14 Annex ZA (informative) Relationship between this European Standard and the Essential Requirements of EU Direc

30、tive 95/16/EC 20 EN 81-2:1998/A1:2005 (E) 3 Foreword This European Standard (EN 81-2:1998/A1:2005) has been prepared by Technical Committee CEN/TC 10 “Lifts, escalators and moving walks”, the secretariat of which is held by AFNOR. This Amendment to the European Standard EN 81-2:1998 shall be given t

31、he status of a national standard, either by publication of an identical text or by endorsement, at the latest by May 2006, and conflicting national standards shall be withdrawn at the latest by May 2006. This European Standard has been prepared under a mandate given to CEN by the European Commission

32、 and the European Free Trade Association, and supports essential requirements of EU Directive(s). For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of this European Standard. The 1998 edition of EN 81-2, under 14.1.2.1.1 b) 3) and Annex H foresees the use of

33、electronic components in safety circuits thus giving hardware provisions. This amendment extends their use to permit the inclusion of software (programmable electronic systems - PESSRAL). This amendment A1 covers those aspects that need to be addressed when programmable electronic systems (PESSRAL)

34、are used to carry out electric safety functions for lifts within the scope of EN 81-2:1998 and EN 81-2:1998/A2:2004. This amendment A1 covers the necessary additional precautions by replacing the relevant existing text of EN 81-2:1998 or adding new clauses as indicated. NOTE Drafting and presentatio

35、n of the amended text has been arranged to comply with the presentation of EN 81-2:1998. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark

36、, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EN 81-2:1998/A1:2005 (E) 4 1 Modifications in Clause 0 A new 0.2.6 shall be a

37、dded as follows: “0.2.6 Risk analysis, terminology and technical solutions have been considered taking into account the methods of the EN 61508-series of standards. This led to a necessary classification of safety functions applied to PESSRAL.” 0.3.5 shall be amended as follows: “0.3.5 The requireme

38、nts of this European Standard regarding electrical safety devices are such that the possibility of a failure of an electric safety device (see 14.1.2.1.1 b) complying with all the requirements of this European Standard needs not to be taken into consideration.” 2 Modifications in Clause 2 Clause 2 s

39、hall be amended as follows: “EN 61508-1:2001, Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 1: General requirements (IEC 61508-1:1998 + Corrigendum 1999). EN 61508-2:2001, Functional safety of electrical/electronic/programmable electronic safety-rel

40、ated systems - Part 2: Requirements for electrical/electronic/programmable electronic safety-related systems (IEC 61508-2:2000). EN 61508-3:2001, Functional safety of electrical/electronic/programmable electronic safety related systems - Part 3: Software requirements (IEC 61508-3:1998 + Corrigendum

41、1999). EN 61508-4:2001, Functional safety of electrical/electronic/programmable electronic safety related systems - Part 4: Definitions and abbreviations (IEC 61508-4:1998 + Corrigendum 1999). EN 61508-5:2001, Functional safety of electrical/electronic/programmable electronic safety related systems

42、- Part 5: Examples of methods for the determination of safety integrity levels (IEC 61508-5 1998 + Corrigendum 1999). EN 61508-7:2001, Functional safety of electrical/electronic/programmable electronic safety related systems - Part7: Overview of techniques and measures (IEC 61508-7:2000).“ 3 Modific

43、ations in Clause 3 Clause 3 shall be amended by the following definitions: “programmable electronic system in safety related applications for lifts (PESSRAL) (systme lectronique programmable dans les applications lies la scurit des ascenseurs (PESSRAL) (programmierbares elektronisches System in sich

44、erheitstechnisch relevanten Anwendungen fr Aufzge (PESSRAL) system for control, protection or monitoring based on one or more programmable electronic devices, including all elements of the system such as power supplies, sensors and other input devices, data highways and other communication paths, an

45、d actuators and other output devices, used in safety related applications as listed in Tables A.1 and A.2. EN 81-2:1998/A1:2005 (E) 5 system reaction time (temps de raction systme) (Systemreaktionszeit) sum of the following two values: a) time period between the occurrence of a fault in the PESSRAL

46、and the initiation of the corresponding action on the lift; b) time period for the lift to respond to the action, maintaining a safe state safety integrity level (SIL) (niveau dintgrit de scurit) (Sicherheits-Integrittslevel) discrete level for specifying the safety integrity requirements of the saf

47、ety functions to be allocated to the PESSRAL NOTE In this European Standard SIL 1 is representing the lowest level and SIL 3 the highest.“ 4 Modifications in Clause 14 14.1.2.1.1 b) shall be amended as follows: “ 4) programmable electronic systems in safety related applications in accordance with 14

48、.1.2.6.“ A new 14.1.2.6 shall be added as follows: “14.1.2.6 Programmable electronic systems in safety related applications (PESSRAL) Tables A.1 and A.2 give the safety integrity level for each electric safety device. Programmable electronic systems designed in accordance with 14.1.2.6 cover the req

49、uirements of 14.1.2.3.2. The minimum requirements of the safety functions common to all SILs are listed in Tables 7, 8 and 9. In addition specific measures required for SILs 1, 2 and 3 are listed respectively in Tables 10, 11 and 12. NOTE The EN 61508-7:2001 clauses listed in Tables 7 to 12 refer to the relevant requirements in EN 61508-2:2001 and EN 61508-3:2001. To avoid unsafe modification, measures to prevent unauthorised access to the program code and safety related data of PESSRAL shall be provided, e.g. using EPROM, access code