SANS 301128-2005 Fixed Radio Systems Point-to-point equipment Plesiochronous Digital Hierarchy (PDH) Low and medium capacity digital radio systems operating in the 13 GHz 15 GHz an.pdf

《SANS 301128-2005 Fixed Radio Systems Point-to-point equipment Plesiochronous Digital Hierarchy (PDH) Low and medium capacity digital radio systems operating in the 13 GHz 15 GHz an.pdf》由会员分享，可在线阅读，更多相关《SANS 301128-2005 Fixed Radio Systems Point-to-point equipment Plesiochronous Digital Hierarchy (PDH) Low and medium capacity digital radio systems operating in the 13 GHz 15 GHz an.pdf（25页珍藏版）》请在麦多课文档分享上搜索。

1、 Collection of SANS standards in electronic format (PDF) 1. Copyright This standard is available to staff members of companies that have subscribed to the complete collection of SANS standards in accordance with a formal copyright agreement. This document may reside on a CENTRAL FILE SERVER or INTRA

2、NET SYSTEM only. Unless specific permission has been granted, this document MAY NOT be sent or given to staff members from other companies or organizations. Doing so would constitute a VIOLATION of SABS copyright rules. 2. Indemnity The South African Bureau of Standards accepts no liability for any

3、damage whatsoever than may result from the use of this material or the information contain therein, irrespective of the cause and quantum thereof. ICS 33.060.30 ISBN 0-626-17396-5 SANS 301128:2005Edition 1 ETSI EN 301128:2001Edition V1.2.1SOUTH AFRICAN NATIONAL STANDARD Fixed Radio Systems; Point-to

4、-point equipment; Plesiochronous Digital Hierarchy (PDH); Low and medium capacity digital radio systems operating in the 13 GHz, 15 GHz and 18 GHz frequency bands This national standard is the identical implementation of ETSI EN 301128:2001 and is adopted with the permission of the European Telecomm

5、unications Standards Institute. Published by Standards South Africa 1 dr lategan road groenkloof private bag x191 pretoria 0001 tel: 012 428 7911 fax: 012 344 1568 international code + 27 12 www.stansa.co.za Standards South Africa SANS 301128:2005 Edition 1 ETSI EN 301128:2001 Edition V1.2.1 Table o

6、f changes Change No. Date Scope Abstract Specifies the minimum performance parameters for terrestrial fixed service digital radio communications equipment operating in the 13 GHz, 15 GHz and 18 GHz frequency bands. Keywords DRRS, PDH, radio, transmission. National foreword This South African standar

7、d was approved by National Committee StanSA TC 74, Communication technology, in accordance with procedures of Standards South Africa, in compliance with annex 3 of the WTO/TBT agreement. In South Africa, spectrum band plans are regulated by the Independent Communications Authority of South Africa (I

8、CASA). The South African Table of Frequency Allocations is obligatory for South Africa and will override any reference to frequency ranges as mentioned in this standard. ETSl EN 301 128 VI .2.1 (2001-02) European Standard (Telecommunications series) Fixed Radio Systems; Point-to-point equipment; Ple

9、siochronous Digital Hierarchy (PDH); Low and medium capacity digital radio systems operating in the 13 GHz, 15 GHz and 18 GHz frequency bands ETSI EN 301 128 V1.2.1 (2001-02) Reference RENITM-04111-15 Keywords DRRS, PDH, radio, transmission ETSl 650 Route des Lucioles F-06921 Sophia Antipolis Cedex

10、- FRANCE Tel.: +33492944200 Fax: +334936547 16 Siret No 348 623 562 00017 - NAF 742 C Association a but non lucratif enregistree a la Sous-Prefecture de Grasse (06) No 7803188 Imiportant notice Individual copies of the present document can be downloaded from: http:/www.etsi.org The present document

11、may be made available in more than one electronic version or in print. In any case of existing or perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF). In case of dispute, the reference shall be the printing on ETSl printers of the PDF v

12、ersion kept on a specific network drive within ETSl Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSl documents is available at http:/www.etsi.orq/tb/statusl If you fin

13、d errors in the present document, send your comment to: editoretsi.fr Copyright Notification No part may be reproduced except as authorized by written permission. The copyright and the foregoing restriction extend to reproduction in all media. O European Telecommunications Standards Institute 2001.

14、All rights reserved. Contents Intellectual Property Rights 5 Foreword 5 1 Scope 6 . 2 References 6 3 Symbols and abbreviations 8 3.1 Symbols 8 3.2 Abbreviations 8 General characteristics 8 . Frequency bands and channel arrangements 8 Channel plans 8 Channel Spacing (CS) 9 . Compatibility requirement

15、s between systems 9 . . Performance and availablllty requirements . 9 Environmental conditions 9 Equipment within weather protected locations (indoor locations) 9 Equipment for non-weather protected locations (outdoor locations) 10 . Electromagnetic compatibility conditions 10 . Power supply 10 Tele

16、communications Management Network (TMN) requirements 10 Block diagram . 11 Mechanical specifications for Radio Frequency (RF) interfaces 11 5 Baseband characteristics . 11 5.1 Plesiochronous Digital Hierarchy (PDH) interfaces 11 Transmitter characteristics 12 Output power 12 Automatic Transmit Power

17、 Control (ATPC) . 12 . RF spectrum masks 12 Discrete CW components exceeding the spectrum mask limit . 14 Spectral lines at the symbol rate . 14 Other spectral lines 14 Spurious emissions 15 . Spurious emissions-external 15 Spurious emissions-internal 15 . Radio frequency tolerance 15 Return loss 16

18、 . . 7 Receiver characteristics . 16 7.1 Receiver spurious emissions 16 . 7.1.1 Spurious emissions-external 16 7.1.2 Spurious emissions-internal 16 7.2 Input level range 16 7.3 Return loss 17 8 System characteristics without diversity 17 8.1 BER as a hction of receiver input level . 17 . 8.2 Equipme

19、nt background bit errors 18 8.3 Interference sensitivity 18 8.3.1 Co-channel external interference 18 8.3.2 Adjacent channel interference 19 8.3.3 Front-end non-linearity requirements (two-tone Continuous Wave (CW) interference) 19 8.3.4 CW interference . 20 8.4 Distortion sensitivity . 20 4 ETSl EN

20、 301 128 V1.2.1 (2001-02) Annex A (informative): Additional information 21 A . 1 Automatic Transmit Power Control (ATPC) . 21 A.2 Spectrum masks 21 . A.3 Lightning protection 21 A.4 Generic mechanical requirements 21 . History 22 ETSl 5 ETSl EN 301 128 V1.2.1 (2001-02) Intellectual Property Rights I

21、PRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 3 14: “Intellectual Property Rights (IPRs); Essential, or

22、potentially Essential, IPRs notijied to ETSI in respect ofETSIstandards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (http:/lwww.etsi.org/ipr). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been camed out by ETSI

23、. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 3 14 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This European Standard (Telecommunications series) has been produced by ETSI Techn

24、ical Committee Transmission and Multiplexing (TM). The former title of the present document was: “Transmission and Multiplexing (TM); Digital Radio Relay Systems (DRRS); Plesiochronous Digital Hierarchy (PDH); Low and medium capacity DRRS operating in the 13 GHz, 15 GHz and 18 GHz i-equency bands“.

25、I National transposition dates 1 / Date of adoption of this EN: 16 February 2001 / Date of latest announcement of this EN (doa): 31 May 2001 Date of latest publication of new National Standard or endorsement of this EN (dople): 30 November 200 1 1 Date of withdrawal of any conflicting National Stand

26、ard (dow): 30 November 200 1 Scope The present document specifies the minimum performance parameters for terrestrial fixed service digital radio communications equipments operating in the 13 GHz, 15 GHz and 18 GHz frequency bands. Digital Radio Relay Systems (DRRS) are used for point-to-point connec

27、tions in local, regional and national networks at data rates between 2 Mbitls and 34 Mbitls. As harmonized channel spacings lower than 13,75 MHz are not available in the 18 GHz frequency band at the drafting date of the present document, capacities lower than 2 x 8 Mbitls are consequently not consid

28、ered in this frequency band. However the present document can be considered as a guideline when national frequency plans based on a 3,5 MHz channel spacing exist. Systems considered in the present document are able to respect ITU-R Recommendation national or international grade performance objective

29、s, i.e. ITU-R Recommendations F. 1 189-1 9 for national, ITU-R Recommendation F. 1092-1 8 for international and ITU-T Recommendation G.826 ll. Maximum hop lengths of about 35 km are normally achievable according to the considered frequency bands. The parameters to be specified fall into two categori

30、es: a) those that are required to provide compatibility between channels from different sources of equipment on the same route, connected either to: - separate antennas; or to - separate polarizations of the same antenna. b) parameters defining the transmission quality of the proposed system. The pr

31、esent document deals with Radio Frequency (RF) and baseband characteristics relevant to low and medium capacity Plesiochronous Digital Hierarchy (PDH) transmission. Antennalfeeder system requirements are covered in EN 300 833 IS. As the maximum transmission rate in a given bandwidth depends on syste

32、m spectral efficiency, different classes are defined: Class 1: equipment based on a minimum 4-state modulation scheme (e.g. 4-FSK, 4-QAM, or equivalent). Class 2: equipment based on a minimum 16-state modulation scheme (e.g. 16-QAM, or equivalent). Safety aspects are outside the mandate of ETSI and

33、they are not considered in the present document. References The following documents contain provisions which, through reference in this text, constitute provisions of the present document. References are either specific (identified by date of publication andlor edition number or version number) or n

34、on-speci tic. For a specific reference, subsequent revisions do not apply. For a non-specific reference, the latest version applies. I ITU-R Recommendation F.497-6: “Radio-frequency channel arrangements for radio-relay systems operating in the 13 GHz frequency band“. 121 ITU-R Recommendation F.636-3

35、: “Radio-frequency channel for radio-relay systems operating in the 15 GHz band“. 31 ITU-R Recommendation F.595-6: “Radio-frequency channel arrangements for radio-relay systems operating in the 18 GHz frequency band“. 7 ETSl EN 301 128 V1.2.1 (2001-02) ETSI ETS 300 019-1-2: “Equipment Engineering (E

36、E); Environmental conditions and environmental tests for telecommunications equipment; Part 1-2: Classification of environmental conditions; Transportation“. ETSI ETS 300 132-1: “Equipment Engineering (EE); Power supply interface at the input to telecommunications equipment; Part 1 : Operated by alt

37、ernating current (ac) derived from direct current (dc) sources“. ETSI ETS 300 132-2: “Equipment Engineering (EE); Power supply interface at the input to telecommunications equipment; Part 2: Operated by direct current (dc)“. ITU-T Recommendation G.703 (1988): “Physicallelectrica1 characteristics of

38、hierarchical digital interfaces“. ITU-R Recommendation F. 1092-1 : “Error performance objectives for constant bit rate digital path at or above the primary rate carried by digital radio-relay systems which may form part of the international portion of a 27 500 km hypothetical reference path“. ITU-R

39、Recommendation F. 1 189-1 : “Error performance objectives for constant bit rate digital paths at or above the primary rate carried by digital radio-relay systems which may form part or all of the national portion of a 27 500 krn hypothetical reference path“. ITU-T Recommendation G.773 (1993): “Proto

40、col suites for Q-interfaces for management of transmission systems“. ITU-T Recommendation G.826 (1999): “Error performance parameters and objectives for international, constant bit rate digital paths at or above the primary rate“. ETSI EN 300 385: “Electromagnetic compatibility and Radio spectrum Ma

41、tters (ERM); ElectroMagnetic Compatibility (EMC) standard for fixed radio links and ancillary equipment“. ITU-R Recommendation F. 1 101: “Characteristics of digital radio-relay systems below about 17 GHz“. ITU-R Recommendation F. 1 102: “Characteristics of radio-relay systems operating in frequency

42、bands above about 17 GHz“. CEPTIERC Recommendation TIR 12-02: “Harmonised radio frequency channel arrangements for analogue and digital terrestrial fixed systems operating in the band 12.75 GHz to 13.25 GHz“. CEPTIERC Recommendation TIR 12-07: “Harmonised radio frequency channel arrangements for dig

43、ital terrestrial fixed systems operating in the band 15.23 to 15.35 GHz“. CEPTIERC Recommendation TIR 12-03: “Harmonised radio frequency channel arrangements for digital terrestrial fixed systems operating in the band 17.7 GHz to 19.7 GHz“. ETSI EN 300 833: “Fixed Radio Systems; Point-to-point Anten

44、nas; Antennas for point-to-point fixed radio systems operating in the frequency band 3 GHz to 60 GHz“. ITU-R Recommendation SM.329-7: “Spurious emissions“ ITU-R Recommendation F. 1 19 1-1 : “Bandwidths and unwanted emissions of digital radio-relay systems“. ITU-R Recommendation F.758-1: “Considerati

45、ons in the development of criteria for sharing between the terrestrial fixed service and other services“. IEC 60 154: “Flanges for waveguides“ CEPTIERC Recommendation 74-01 : “Spurious emissions“ Symbols and abbreviations Symbols For the purposes of the present document, the following symbols apply:

46、 dB dBm GHz kg kHz km Mbitls MHz PPm ns decibel decibel relative to 1 mW GigaHertz kilogramme kiloHertz kilometre Mega-bits per second MegaHertz parts per million nanosecond Abbreviations For the purposes of the present document, the following abbreviations apply: ATPC BBER BER CII CS CSmin CW Fc FS

47、K IF NFD PDH QAM RF RSL TMN TX Automatic Transmit Power Control Background Bit Error Rate Bit Error Rate Carrier to Interference ratio Channel Separation minimum practical Channel Separation (for a given radio-frequency channel arrangement) Continuous Wave cut-off Frequency Frequency Shift Keying In

48、termediate Frequency Net Filter Discrimination Plesiochronous Digital Hierarchy Quadrature Amplitude Modulation Radio Frequency Receive Signal Level Telecommunications Management Network Transmit General characteristics 4.1 Frequency bands and channel arrangements 4.1.1 Channel plans The systems are

49、 required to operate in the 13 GHz, 15 GHz or 18 GHz frequency bands. These channel plans based on a 3,5 MHz homogeneous channel pattern using vertical and horizontal polarizations shall be in accordance with the ITU-R Recommendations F.497-6 I, F.636-3 2, F.595-6 3 and the CEPTIERC Recommendations TIR 12-02 15, TIR 12-07 16 and TIR 12-03 17. All the GO channels shall be in one frequency half band and all the RETURN channels in the other half band. 4.1.2 Channel Spacing (CS) For systems operating on different antennas or different polarization of the same antenna