SANS 25639-2-2009 Exhibitions shows fairs and conventions Part 2 Measurement procedures for statistical purposes《博览会、展览会、商品交易会和风俗集会 第2部分 统计用测量程序》.pdf

《SANS 25639-2-2009 Exhibitions shows fairs and conventions Part 2 Measurement procedures for statistical purposes《博览会、展览会、商品交易会和风俗集会 第2部分 统计用测量程序》.pdf》由会员分享，可在线阅读，更多相关《SANS 25639-2-2009 Exhibitions shows fairs and conventions Part 2 Measurement procedures for statistical purposes《博览会、展览会、商品交易会和风俗集会 第2部分 统计用测量程序》.pdf（14页珍藏版）》请在麦多课文档分享上搜索。

1、 Collection of SANS standards in electronic format (PDF) 1. Copyright This standard is available to staff members of companies that have subscribed to the complete collection of SANS standards in accordance with a formal copyright agreement. This document may reside on a CENTRAL FILE SERVER or INTRA

2、NET SYSTEM only. Unless specific permission has been granted, this document MAY NOT be sent or given to staff members from other companies or organizations. Doing so would constitute a VIOLATION of SABS copyright rules. 2. Indemnity The South African Bureau of Standards accepts no liability for any

3、damage whatsoever than may result from the use of this material or the information contain therein, irrespective of the cause and quantum thereof. ISBN 978-0-626-22231-4 SANS 25639-2:2009 Edition 1 ISO 25639-2:2008 Edition 1SOUTH AFRICAN NATIONAL STANDARD Exhibitions, shows, fairs and conventions Pa

4、rt 2: Measurement procedures for statistical purposes This national standard is the identical implementation of ISO 25639-2:2008 and is adopted with the permission of the International Organization for Standardization. Published by SABS Standards Division 1 Dr Lategan Road Groenkloof Private Bag X19

5、1 Pretoria 0001 Tel: +27 12 428 7911 Fax: +27 12 344 1568 www.sabs.co.za SABS This standard may only be used and printed by approved subscription and freemailing clients of the SABS.SANS 25639-2:2009 Edition 1 ISO 25639-2:2008 Edition 1 Table of changes Change No. Date Scope National foreword This S

6、outh African standard was approved by National Committee SABS TC 184, Health and safety at live events, in accordance with procedures of the SABS Standards Division, in compliance with annex 3 of the WTO/TBT agreement. This SANS document was published in January 2009. This standard may only be used

7、and printed by approved subscription and freemailing clients of the SABS. Reference number ISO 25639-2:2008(E) ISO 2008INTERNATIONAL STANDARD ISO 25639-2 First edition 2008-11-15 Exhibitions, shows, fairs and conventions Part 2: Measurement procedures for statistical purposes Terminologie du secteur

8、 des foires, salons et congrs ou manifestations commerciales Partie 2: Mthodes de comptage des fins statistiques SANS 25639-2:2009This standard may only be used and printed by approved subscription and freemailing clients of the SABS.ISO 25639-2:2008(E) PDF disclaimer This PDF file may contain embed

9、ded typefaces. In accordance with Adobes licensing policy, this file may be printed or viewed but shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In downloading this file, parties accept therein the responsibility of n

10、ot infringing Adobes licensing policy. The ISO Central Secretariat accepts no liability in this area. Adobe is a trademark of Adobe Systems Incorporated. Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation parameters w

11、ere optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below. COPYRIGHT PROTECTED DOCUMENT ISO 2008 All rights res

12、erved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISOs member body in the country of the reque

13、ster. ISO copyright office Case postale 56 CH-1211 Geneva 20 Tel. + 41 22 749 01 11 Fax + 41 22 749 09 47 E-mail copyrightiso.org Web www.iso.org Published in Switzerland ii ISO 2008 All rights reservedSANS 25639-2:2009This standard may only be used and printed by approved subscription and freemaili

14、ng clients of the SABS.ISO 25639-2:2008(E) ISO 2008 All rights reserved iii Foreword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO

15、technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates clo

16、sely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2. The main task of technical committees is to prepare International Standards. Dra

17、ft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote. Attention is drawn to the possibility that some of the elements of this docu

18、ment may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. ISO 25639-2 was prepared by Project Committee ISO/PC 237, Exhibition terminology. ISO 25639 consists of the following parts, under the general title Exhibitions, shows, fairs an

19、d conventions: Part 1: Vocabulary Part 2: Measurement procedures for statistical purposes SANS 25639-2:2009This standard may only be used and printed by approved subscription and freemailing clients of the SABS.ISO 25639-2:2008(E) iv ISO 2008 All rights reservedIntroduction In the context of the exh

20、ibition industry, ISO 25639-1 fulfils the important basic function in standardization of specifying commonly-used terms and definitions. Of equal importance is establishing standard measurement procedures applicable to the terms defined in ISO 25639-1, in order to ensure uniformity in interpretation

21、. This part of ISO 25639 fulfils the latter function and is consequently intended for integral use with ISO 25639-1. SANS 25639-2:2009This standard may only be used and printed by approved subscription and freemailing clients of the SABS.INTERNATIONAL STANDARD ISO 25639-2:2008(E) ISO 2008 All rights

22、 reserved 1 Exhibitions, shows, fairs and conventions Part 2: Measurement procedures for statistical purposes 1 Scope This part of ISO 25639 establishes standard measurement procedures applicable to terms commonly used in the exhibition industry, as defined in ISO 25639-1. This part of ISO 25639 is

23、intended for integral use with ISO 25639-1. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any ame

24、ndments) applies. ISO 25639-1, Exhibitions, shows, fairs and conventions Part 1: Vocabulary 3 Terms and definitions For the purposes of this document, the terms and definitions given in ISO 25639-1 apply. 4 Individual and entity 4.1 General This clause specifies standard measurement procedures appli

25、cable to terms of the category “individual and entity”. 4.2 Exhibitor The measurement of the number of exhibitors shall be supported by the contractual document between the organizer and the main exhibitor. 4.3 Main exhibitor The measurement of the number of main exhibitors shall be supported by the

26、 contractual document between the organizer and the main exhibitor. SANS 25639-2:2009This standard may only be used and printed by approved subscription and freemailing clients of the SABS.ISO 25639-2:2008(E) 2 ISO 2008 All rights reserved4.4 Co-exhibitor The measurement of the number of co-exhibito

27、rs shall be supported by the submission of data made by the main exhibitor to the organizer. 4.5 International exhibitor The measurement of the number of international exhibitors shall be supported by the contractual document between the organizer and the main exhibitor. 4.6 National exhibitor The m

28、easurement of the number of national exhibitors shall be supported by the contractual documents or declaration made by the exhibitor to the organizer. 4.7 Exhibitor staff The measurement of the number of exhibitor staff shall be supported by the number of exhibitor badges issued for the exhibitors.

29、4.8 Represented company The measurement of the number of represented companies shall be supported by the documentation submitted by the main exhibitor to the organizer. 4.9 Visit The measurement of the number of visits shall be supported by the organizers registration and/or entry control system. 4.

30、10 Visitor The measurement of the number of visitors shall be supported by the organizers registration and/or entry control system. Each visitor shall be counted only once for the duration of exhibition. 4.11 Trade visitor The measurement of the number of trade visitors shall be supported by the org

31、anizers registration and entry control system. NOTE In the absence of a registration system, the measurement of the number of trade visitors can be done through an independent and audited visitor survey conducted onsite. 4.12 General public visitor The measurement of the number of general public vis

32、itors shall be supported by the organizers registration and entry control system. NOTE In the absence of a registration system, the measurement of the number of general public visitors can be done through an independent and audited visitor survey conducted onsite. 4.13 International visitor The meas

33、urement of the number of international visitors shall be supported by the organizers registration and entry control system. SANS 25639-2:2009This standard may only be used and printed by approved subscription and freemailing clients of the SABS.ISO 25639-2:2008(E) ISO 2008 All rights reserved 3 NOTE

34、 In the absence of a registration system, the measurement of the number of international visitors can be done through an independent and audited visitor survey conducted onsite. 4.14 National visitor The measurement of the number of national visitors shall be supported by the organizers registration

35、 and entry control system. NOTE In the absence of a registration system, the measurement of the number of national visitors can be done through an independent and audited visitor survey conducted onsite. 4.15 Hosted visitor The measurement of the number of hosted visitors shall be supported by the o

36、rganizers registration and/or entry control system. 4.16 Delegate The measurement of the number of delegates shall be supported by the organizers registration and/or entry control system. 4.17 International delegate The measurement of the number of international delegates shall be supported by the o

37、rganizers registration and/or entry control system. 4.18 National delegate The measurement of the number of national delegates shall be supported by the organizers registration and/or entry control system. 4.19 Accompanying person The measurement of the number of accompanying persons shall be suppor

38、ted by the organizers registration and/or entry control system. 4.20 Media representative The measurement of the number of media representatives shall be supported by the organizers registration and/or entry control system. Each media representative shall be counted only once for duration of exhibit

39、ion. 4.21 Attendee The measurement of the number of attendees shall be supported by the measurements as defined elsewhere in this part of ISO 25639. Each attendee shall be counted once only for duration of exhibition. 4.22 Total attendance The measurement of total attendance and the breakdown of adm

40、ission categories shall be supported by the measurements as defined elsewhere in this part of ISO 25639. SANS 25639-2:2009This standard may only be used and printed by approved subscription and freemailing clients of the SABS.ISO 25639-2:2008(E) 4 ISO 2008 All rights reserved5 Types of events 5.1 Ge

41、neral This clause specifies standard measurement procedures applicable to terms of the category “types of events”. 5.2 International exhibition The measurement of the number of international exhibitions shall be supported by the organizers registration system and/or entry control system and/or the c

42、ontracts between the organizer and the main exhibitor. 6 Physical item 6.1 General This clause specifies standard measurement procedures applicable to terms of the category “physical item”. 6.2 Booth space The measurement of the size of booth space shall be supported by the contractual document betw

43、een organizer and the exhibitor. It can be cross-checked by actual floor measurements or through scaled drawings. 6.3 Raw space The measurement of the size of raw space shall be supported by the contractual document between the organizer and the main exhibitor. 6.4 Contra booth The measurement of th

44、e number of contra booths shall be supported by the contractual document between the organizer and the main exhibitor. 6.5 Gross indoor exhibition venue space The measurement of the size of gross indoor exhibition venue space shall be supported by scaled drawings of the venue. 6.6 Gross outdoor exhi

45、bition venue space The measurement of the size of gross outdoor exhibition venue space shall be supported by scaled drawings of the venue. 6.7 Rented exhibition space The measurement of the size of rented exhibition space shall be supported by the contractual document between the organizer and the e

46、xhibitor. It can be cross-checked by actual floor measurements or through scaled drawings. 6.8 Gross exhibition space The measurement of the size of gross exhibition space shall be supported by the contractual document between the organizer and the venue. It can be cross-checked by actual floor meas

47、urements or through scaled drawings. SANS 25639-2:2009This standard may only be used and printed by approved subscription and freemailing clients of the SABS.ISO 25639-2:2008(E) ISO 2008 All rights reserved 5 6.9 Net exhibition space The measurement of the size of net exhibition space shall be suppo

48、rted by the contractual document between the organizer and the exhibitor. The featured areas and booth space can be cross-checked by actual floor measurements or through scaled drawings. 7 Miscellaneous 7.1 General This clause specifies standard measurement procedures applicable to terms of the cate

49、gory “miscellaneous”. 7.2 Duration of exhibition The measurement of the duration of exhibition shall be supported by the imprints on the exhibitions documents. SANS 25639-2:2009This standard may only be used and printed by approved subscription and freemailing clients of the SABS. This page has been left blank intentionally This standard may only be used and printed by approved subscription and freemailing clients of the SABS. SABS Standards Division The objective of the SABS Standards Division is to develop, promote