SANS 10957-2009 Information and documentation - International standard music number (ISMN)《信息及文献 国际标准音乐编号(ISMN)》.pdf

《SANS 10957-2009 Information and documentation - International standard music number (ISMN)《信息及文献 国际标准音乐编号(ISMN)》.pdf》由会员分享，可在线阅读，更多相关《SANS 10957-2009 Information and documentation - International standard music number (ISMN)《信息及文献 国际标准音乐编号(ISMN)》.pdf（10页珍藏版）》请在麦多课文档分享上搜索。

1、 Collection of SANS standards in electronic format (PDF) 1. Copyright This standard is available to staff members of companies that have subscribed to the complete collection of SANS standards in accordance with a formal copyright agreement. This document may reside on a CENTRAL FILE SERVER or INTRA

2、NET SYSTEM only. Unless specific permission has been granted, this document MAY NOT be sent or given to staff members from other companies or organizations. Doing so would constitute a VIOLATION of SABS copyright rules. 2. Indemnity The South African Bureau of Standards accepts no liability for any

3、damage whatsoever than may result from the use of this material or the information contain therein, irrespective of the cause and quantum thereof. ISBN 978-0-626-22576-6 SANS 10957:2009 Edition 1 ISO 10957:1993 Edition 1SOUTH AFRICAN NATIONAL STANDARD Information and documentation International stan

4、dard music number (ISMN) This national standard is the identical implementation of ISO 10957:1993, and is adopted with the permission of the International Organization for Standardization. Published by SABS Standards Division 1 Dr Lategan Road Groenkloof Private Bag X191 Pretoria 0001 Tel: +27 12 42

5、8 7911 Fax: +27 12 344 1568 www.sabs.co.za SABS This standard may only be used and printed by approved subscription and freemailing clients of the SABS.SANS 10957:2009 Edition 1 ISO 10957:1993 Edition 1 Table of changes Change No. Date Scope National foreword This South African standard was approved

6、 by National Committee SABS SC 46C, Information and documentation Identification and description, in accordance with procedures of the SABS Standards Division, in compliance with annex 3 of the WTO/TBT agreement. This SANS document was published in March 2009. This standard may only be used and prin

7、ted by approved subscription and freemailing clients of the SABS.INTERNATIONAL STANDARD IS0 10957 First edition 1993-12-01 Information and documentation - International standard music number (ISMN) Information et documentation - Num - a publisher identifier; - an item identifier; _ - a check digit.

8、When an international standard music number is ei- ther written or printed, it shall be preceded by the letters ISMN, and each element shall be separated by a space or a hyphen as in the following examples: ISMN M-01-1 23456-3 ISMN M 571 10051 3 1) Each digit is an arabic numeral between 0 and 9. 2)

9、 The EAN prefix for printed music is 979. 1 SANS 10957:2009This standard may only be used and printed by approved subscription and freemailing clients of the SABS.IS0 10957:1993Q:E) 3.1 Letter M prefix The first element of the ISMN shall always be the letter M. The function of the M prefix is to per

10、mit ISMN to be distinguished from ISBN and other similar numbers in situations, such as some computer appli- cations, where the letters ISMN are not included with the number 3.2 Publisher identifier The second element of the ISMN shall be the pub- lisher identifier which shall be allocated by a cent

11、ral agency appointed for this purpose. It varies in length from publisher to publisher according to the output of each publisher. 3.3 Item identifier The third element of the ISMN shall be the item identifier. This element identifies an edition of a title or an individual component of an edition (e.

12、g. full score, miniature score, set of wind parts, oboe part, etc.). The length of the item identifier is determined by the length of the publisher identifier which precedes it. 3.4 Check digit The fourth and final eler check digit. The check digit is calcul IO . aent of the BSMN shall be the ated o

13、n a weighted modulus 4 Printing and position of the ISMN 4.1 The ISMN shall be printed on the back cover of the publication and on the back of the jacket if the item has one. 4.2 If practicable, the ISMN should also be printed with the copyright notice. 4.3 If it is not possible to print the ISMN in

14、 any of these positions, the ISMN shall be printed in some other prominent position on the item. 4.4 When the item is a single sheet, the I be printed in only one place on the item. 4.5 Each volume of a multi-volume set s SMN may louId bear a list of all the ISMN pertaining to the particular vol- um

15、e and to the set as a whole. An item within a set may also bear a list of the ISMN for each of the other individual items in the set. 4.6 When the item is an anthology, the ISMN of the anthology shall be distinguished from the ISMN of the individual pieces that form the anthology. 4.7 If an item bea

16、rs an ISBN or an ISSN as well as an ISMN, these numbers should be printed adjacent to each other. Each international standard number shall be preceded by the appropriate identifier (i.e. the letters ISBN, ISSN or ISMN). 5 Administration The ISMN system shall be administered by the inter- national re

17、gistration authority appointed for this pur- pose and by other appropriate national or regional agencies. SANS 10957:2009This standard may only be used and printed by approved subscription and freemailing clients of the SABS.IS0 10957:1993(E) Annex A (normative) Guidelines for the use of ISMN A.1 Ge

18、neral principles for the assignment of ISMN A.l.1 Each item within an edition shall be assigned its own unique ISMN (e.g. full score, miniature score, set of wind parts, oboe part). A.1.2 Where an item is an excerpt from another work, it shall be assigned its own ISMN. A.1.3 Each volume within a mul

19、ti-volume set shall be assigned its own ISMN. A separate ISMN for the whole set may be assigned as well. A.1.4 Each new version shall be assigned its own ISMN (e.g. a transposition for a different voice, an ar- rangement for a different medium of performance). A.1.5 Any substantive revision to the c

20、ontent of an item, whether or not it is termed “revised”, consti- tutes the creation of a new item (e.g. the addition of a translation of the text or of fingerings in piano mu- sic). Each new item shall be assigned its own ISMN. A.1.6 Any of the following changes to an item, even if the content of t

21、he item itself is otherwise un- changed, constitutes the creation of a new item which shall be assigned its own ISMN: a) where there is a change in binding (e.g. cloth, paperbound, spiral); b) where the physical size of an item is substantially changed (e.g. in order to produce a new full, study or

22、miniature score version); c) where a set is broken up and the parts are made available separately; or where separately available parts are assembled to form a new set. A.1.7 The following changes do not constitute the creation of a new item: a) a change of cover design; b) a change in colour or othe

23、r marginal difference; c) a change in price. Al.8 Once assigned, an ISMN shall never be used again, even if the item to which it was originally as- signed has been out of print for a long time. A.2 Administration A.2.1 The central registration authority for the ISMN shall be the International ISMN A

24、gency3). A.2.2 of the There shal ISMN syste I be agencies for the administration m on the regional or national level. A.3 Application of ISMN Details of the application of the ISMN are explained in a users manual available from the registration authority for this International Standard. 31 Internati

25、onal ISMN Agency, Staatsbibliothek zu Berlin-Preussischer Kulturbesitz, D-1 0772 Berlin, Germany. Telephone: (030) 266 2498. Teiefax: (030) 266 2378. SANS 10957:2009This standard may only be used and printed by approved subscription and freemailing clients of the SABS.IS0 10957:1993(E) Annex B (info

26、rmative) Bibliography l IS0 2108:1992, Information and documentation - International standard book numbering (ISBN). 3 IS0 3901: I 986, Documentation - lntema tional Standard Recording Code (MC). 2 IS0 3297: 1986, Documentation - International standard serial numbering (ISSN). 4 IS0 7064: 1983, Data

27、 processing - Check character systems. SANS 10957:2009This standard may only be used and printed by approved subscription and freemailing clients of the SABS. SABS Standards Division The objective of the SABS Standards Division is to develop, promote and maintain South African National Standards. Th

28、is objective is incorporated in the Standards Act, 2008 (Act No. 8 of 2008). Amendments and Revisions South African National Standards are updated by amendment or revision. Users of South African National Standards should ensure that they possess the latest amendments or editions. The SABS continuou

29、sly strives to improve the quality of its products and services and would therefore be grateful if anyone finding an inaccuracy or ambiguity while using this standard would inform the secretary of the technical committee responsible, the identity of which can be found in the foreword. Tel: +27 (0) 1

30、2 428 6666 Fax: +27 (0) 12 428 6928 The SABS offers an individual notification service, which ensures that subscribers automatically receive notification regarding amendments and revisions to South African National Standards. Tel: +27 (0) 12 428 6883 Fax: +27 (0) 12 428 6928 E-mail: salessabs.co.za

31、Buying Standards Contact the Sales Office for South African and international standards, which are available in both electronic and hardcopy format. Tel: +27 (0) 12 428 6883 Fax: +27 (0) 12 428 6928 E-mail: salessabs.co.za South African National Standards are also available online from the SABS webs

32、ite http:/www.sabs.co.za Information on Standards The Standards Information Centre provides a wide range of standards-related information on both national and international standards, and is the official WTO/TBT enquiry point for South Africa. The Centre also offers an individual updating service ca

33、lled INFOPLUS, which ensures that subscribers automatically receive notification regarding amendments to, and revisions of, international standards. Tel: +27 (0) 12 428 6666 Fax: +27 (0) 12 428 6928 E-mail: infosabs.co.za Copyright The copyright in a South African National Standard or any other publ

34、ication published by the SABS Standards Division vests in the SABS. Unless exemption has been granted, no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means without prior written permission from the SABS Standards Division. This does not preclude the f

35、ree use, in the course of implementing the standard, of necessary details such as symbols, and size, type or grade designations. If these details are to be used for any purpose other than implementation, prior written permission must be obtained. Details and advice can be obtained from the Senior Manager. Tel: +27 (0) 12 428 6666 Fax: +27 (0) 12 428 6928 E-mail: infosabs.co.za This standard may only be used and printed by approved subscription and freemailing clients of the SABS.