SAE AS 25067A-2011 Conduit Assembly Flexible Radio Frequency Shielding《射频屏蔽挠性导管组件》.pdf

《SAE AS 25067A-2011 Conduit Assembly Flexible Radio Frequency Shielding《射频屏蔽挠性导管组件》.pdf》由会员分享，可在线阅读，更多相关《SAE AS 25067A-2011 Conduit Assembly Flexible Radio Frequency Shielding《射频屏蔽挠性导管组件》.pdf（3页珍藏版）》请在麦多课文档分享上搜索。

1、AEROSPACE STANDARD (R) CONDUIT ASSEMBLY, FLEXIBLE, RADIO FREQUENCY SHIELDING AS25067Copyright 2011 SAE International All rights reserved. No part of this publication may be reproduced, stored in a retrieval system or transmitted, in any form or by any means, electronic, mechanical, photocopying, rec

2、ording, or otherwise, without the prior written permission of SAE. TO PLACE A DOCUMENT ORDER: Tel: 877-606-7323 (inside USA and Canada) Tel: +1 724-776-4970 (outside USA) Fax: 724-776-0790 Email: CustomerServicesae.org SAE WEB ADDRESS: http:/www.sae.org ISSUED 2004-04REVISED 2011-07THIRD ANGLE PROJE

3、CTION CUSTODIAN: AE-8A REV.AFEDERAL SUPPLY CLASS 5975 AS25067SHEET 1 OF 3REV. APROCUREMENT SPECIFICATION: NONESAE Technical Standards Board Rules provide that: “This report ispublishedby SAE toadvance thestate of technicalandengineering sciences. Theuse ofthis report is entirely voluntary, andits ap

4、plicability and suitability forany particular use,including any patent infringement arising therefrom, isthe soleresponsibilityofthe user.”SAE reviews eachtechnicalreport at least every five years at which time itmay bereaffirmed, revised, orcancelled. SAE invites yourwrittencomments andsuggestions.

5、 SAE values your input. To provide feedbackon this Technical Report, please visit http:/www.sae.org/technical/standards/AS25067ARATIONALE CLARIFY DRAWINGS, CORRECT REFERENCE AND ADDRESS MINOR TECHNICAL ERRORS. NOTICE AS25067 CONDUIT ASSEMBLIES CONSIST OF AS25064 CONDUITS, AS25065 COLLARS, AS25067 NU

6、TS, REQUIRES NO QUALIFICATION AND HAS NO PROCUREMENT SPECIFICATION. PERFORMANCE IS IN ACCORDANCE WITH AS25064. FIGURE 1 MS25067-2 3/16 INCH CONDUIT ASSEMBLY TABLE 1 MS25067-2 REQUIRED PART NUMBERS PART NUMBER CONDUIT PART NUMBER FERRELL, COLLAR, NUT ASSEMBLY PART NUMBER MS25067-2 MS25064-3 MS25065-2

7、 CONDUITFERRULE, COLLAR AND NUT ASSYLENGTH .250Copyright SAE International Provided by IHS under license with SAENot for ResaleNo reproduction or networking permitted without license from IHS-,-,-AEROSPACE STANDARD AS25067SHEET 2 OF 3REV. A(R) CONDUIT ASSEMBLY, FLEXIBLE, RADIO FREQUENCY SHIELDING FI

8、GURE 2 MS25067-3 THRU -10 CONDUIT ASSEMBLIES TABLE 2 MS25067-3 THRU -10 REQUIRED PART NUMBERS PARTNUMBER CONDUIT PART NUMBER NUT PART NUMBER FERRELL PART NUMBER MS25067-3 MS25064-3 MS25066-10 MS25065-3 MS25067-4 MS25064-4 MS25066-10 MS25065-4 MS25067-5 MS25064-5 MS25066-11 MS25065-5 MS25067-6 MS2506

9、4-6 MS25066-12 MS25065-6 MS25067-8 MS25064-8 MS25066-14 MS25065-8 MS25067-10 MS25064-10 MS25066-16 MS25065-10 Copyright SAE International Provided by IHS under license with SAENot for ResaleNo reproduction or networking permitted without license from IHS-,-,-AEROSPACE STANDARD AS25067SHEET 3 OF 3REV

10、. A(R) CONDUIT ASSEMBLY, FLEXIBLE, RADIO FREQUENCY SHIELDING FIGURE 3 AS25067-12 THRU -23 CONDUIT ASSEMBLIES TABLE 3 MS25067-12 THRU -23 REQUIRED PART NUMBERS PARTNUMBER CONDUIT PART NUMBER NUT PART NUMBER FERRULE PART NUMBER -12 MS25064-12 MS25066-19 MS25065-12 -16 MS25064-16 MS25066-23 MS25065-16

11、-18 MS25064-18 MS25066-26 MS25065-18 -22 MS25064-22 MS25066-30 MS25065-22 -23 MS25064-22 MS25066-31 MS25065-22 REQUIREMENTS 1. DIMENSIONS ARE IN INCHES. 2. ASSEMBLY LENGTHS SHALL BE SPECIFIED IN PURCHASE ORDER. U.S. GOVERNMENT STOCKING NOT RECOMMENDED. FABRICATE FROM RAW MATERIAL AS NEEDED. 3. PERFO

12、RMANCE SHALL BE AS APPLICABLE IN AS25064. 4. PART NUMBER EXAMPLE MS25067-23I I_ ASSEMBLY AS25064, AS25066, AND AS25065 COMBINATION I_ CONDUIT ASSEMBLY SPECIFICATION NUMBER Copyright SAE International Provided by IHS under license with SAENot for ResaleNo reproduction or networking permitted without license from IHS-,-,-