PIA PS70105-1998 Band Spring Parachute Pack Opening《跳伞包开口弹簧带 MS70105》.pdf

《PIA PS70105-1998 Band Spring Parachute Pack Opening《跳伞包开口弹簧带 MS70105》.pdf》由会员分享，可在线阅读，更多相关《PIA PS70105-1998 Band Spring Parachute Pack Opening《跳伞包开口弹簧带 MS70105》.pdf（3页珍藏版）》请在麦多课文档分享上搜索。

1、m 5530330 000075 577 m PS70 105 4 October 1999 ADOPTION NOTICE PS70105, “BAND, SPRING, PARACHUTE PACK OPENING“, was adopted on 4 October 1999 for use by the Department of Defense (DoD). Proposed changes by DoD activities must be submitted to the DoD Adopting Activity: Defense Supply Center Richmond,

2、 ATTN: DSCR- VBD, 8000 Jefferson Davis Highway, Richmond, Virginia, 23297-5610. DoD activities may obtain copies of this standard fiom the Standardization Document Order Desk, 700 Robbins Avenue, Building 4D, Phiiadelphia, PA 191 11-5094. Private sector may purchase copies fiom the Parachute Industr

3、y Association, 3833 West Oakton Street, Skokie, IL 60076, or at For cross-reference purposes, Part Numbers MS70105 and PS70105 are interchangeable. Custodians: Air Force - 99 Army - GL DLA - IS Navy - AS Reviewers: Air Force - 11,82 Navy - MC Army - AV Adopting activity: DLA - GS (Project 1670-0033

4、) AMSC N/A FSC 1670 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. The following commercial specification is adopted from the military document referenced without change to thecontent.Note: Although many military quality and inspection specifications, drawings and

5、standards have beendiscontinued or deleted, most have been replaced by industry and commercial documents. When thespecification refers to a discontinued or deleted document, you should refer to the procurement document oryour contracting officer for guidance.The Parachute Industry Association makes

6、this document available for use by Industry and Governmentorganizations that wish to apply this specification to their products. This document is published by the PIA toprovide technical and engineering standards that can be used by reference by all those who may benefit fromthem. The use of this do

7、cument is entirely voluntary, and its applicability and suitability for any particular use,including any patent or trademark infringement arising therefrom, is the sole responsibility of the user. Theoriginal government document was scanned. There may be errors especially in numbers. PIA disclaims a

8、nyresponsibility for accuracy. The PIA reviews each technical publication periodically, at which time it may bereaffirmed, revised, or canceled. The PIA invites your written comments and suggestions.Notice: This document has been adopted with only typographical corrections from the original Mil-Spec

9、, and isbeing maintained as a commercial specification by the Parachute Industry Association. Orders, inquiries andcomments should be addressed to PIA, Specification Department, 1315 Cheyenne Drive, Richardson, TX 75080USA, or via e-mail: , or to our web site: http:/.Initial Issue 7 January 1998Par

10、achute StandardTitle BAND, SPRING, PARACHUTEPACK OPENING PS70105Procurement SpecificationPIA-H-7195Renamed From:MS70105 Sheet 1 of 2Copyright 1998 Parachute Industry Association Inc.Initial Issue 7 January 1998Parachute StandardTitle BAND, SPRING, PARACHUTEPACK OPENINGPS70105Procurement SpecificationPIA-H-7195Renamed From:MS70105 Sheet 1 of 2Copyright 1998 Parachute Industry Association Inc.