NFPA 705-2013 Recommended Practice for a Field Flame Test for Textiles and Films (Effective Date 12 17 2012).pdf

《NFPA 705-2013 Recommended Practice for a Field Flame Test for Textiles and Films (Effective Date 12 17 2012).pdf》由会员分享，可在线阅读，更多相关《NFPA 705-2013 Recommended Practice for a Field Flame Test for Textiles and Films (Effective Date 12 17 2012).pdf（15页珍藏版）》请在麦多课文档分享上搜索。

1、NFPA705 Recommended Practice for a Field Flame Test for Textiles and Films 2013 Edition NFPA, 1 Batterymarch Park, Quincy, MA 02169-7471 An International Codes and Standards Organization IMPORTANT NOTICES AND DISCLAIMERS CONCERNING NFPADOCUMENTSNOTICE AND DISCLAIMER OF LIABILITY CONCERNING THE USE O

2、F NFPA DOCUMENTSNFPAcodes, standards, recommended practices, and guides (“NFPA Documents”), of which the document contained herein is one, are developed through a consensus standards development process approved by the American National Standards Institute. This process brings together volunteers re

3、presenting varied viewpoints and interests to achieve consensus on fire and other safety issues. While the NFPA administers the process and establishes rules to promote fairness in the development of consensus, it does not independently test, evaluate, or verify the accuracy of any information or th

4、e soundness of any judgments contained in NFPA Documents. The NFPA disclaims liability for any personal injury, property or other damages of any nature whatsoever, whether special, indirect, consequential or compensatory, directly or indirectly resulting from the publication, use of, or reliance on

5、NFPA Documents. The NFPA also makes no guaranty or warranty as to the accuracy or completeness of any information published herein. In issuing and making NFPA Documents available, the NFPA is not undertaking to render professional or other services for or on behalf of any person or entity. Nor is th

6、e NFPA undertaking to perform any duty owed by any person or entity to someone else. Anyone using this document should rely on his or her own independent judgment or, as appropriate, seek the advice of a competent professional in determining the exercise of reasonable care in any given circumstances

7、. The NFPA has no power, nor does it undertake, to police or enforce compliance with the contents of NFPA Documents. Nor does the NFPA list, certify, test, or inspect products, designs, or installations for compliance with this document. Any certification or other statement of compliance with the re

8、quirements of this document shall not be attributable to the NFPA and is solely the responsibility of the certifier or maker of the statement. 12 /12ISBN: 978-145590597-3 (Print)ISBN: 978-145590642-0 (PDF)REMINDER: UPDATING OF NFPA DOCUMENTSUsers of NFPA codes, standards, recommended practices, and

9、guides (“NFPA Documents”) should be aware that NFPA Documents may be amended from time to time through the issuance of Tentative Interim Amendments or corrected by Errata. An official NFPA Document at any point in time consists of the current edition of the document together with any Tentative Inter

10、im Amendment and any Errata then in effect.In order to determine whether an NFPA Document has been amended through the issuance of Tentative Interim Amendments or corrected by Errata, visit the Document Information Pages on NFPAs website. The Document Information Pages provide up-to-date, document s

11、pecific information including any issued Tentative Interim Amendments and Errata.To access the Document Information Page for a specific NFPA Document go to http:/www.nfpa.org/document for a list of NFPA Documents, and click on the appropriate Document number (e.g., NFPA 101). In addition to posting

12、all existing Tentative Interim Amendments and Errata, the Document Information Page also includes the option to sign-up for an “Alert” feature to receive an email notification when new updates and other information are posted regarding the document. IMPORTANT NOTICES AND DISCLAIMERS CONCERNING NFPAD

13、OCUMENTSADDITIONAL NOTICES AND DISCLAIMERSUpdating of NFPA Documents Users of NFPA codes, standards, recommended practices, and guides (“NFPA Documents”) should be aware that these documents may be superseded at any time by the issuance of new editions or may be amended from time to time through the

14、 issuance of Tentative Interim Amendments. An official NFPA Document at any point in time consists of the current edition of the document together with any Tentative Interim Amendments and any Errata then in effect. In order to determine whether a given document is the current edition and whether it

15、 has been amended through the issuance of Tentative Interim Amendments or corrected through the issuance of Errata, consult appropriate NFPA publications such as the National Fire CodesSubscription Service, visit the NFPA website at www.nfpa.org, or contact the NFPA at the address listed below.Inter

16、pretations of NFPA Documents A statement, written or oral, that is not processed in accordance with Section 6 of the Regulations Governing Committee Projects shall not be considered the official position of NFPA or any of its Committees and shall not be considered to be, nor be relied upon as, a For

17、mal Interpretation.Patents The NFPA does not take any position with respect to the validity of any patent rights referenced in, related to, or asserted in connection with an NFPA Document. The users of NFPA Documents bear the sole responsibility for determining the validity of any such patent rights

18、, as well as the risk of infringement of such rights, and the NFPA disclaims liability for the infringement of any patent resulting from the use of or reliance on NFPA Documents.NFPA adheres to the policy of the American National Standards Institute (ANSI) regarding the inclusion of patents in Ameri

19、can National Standards (“the ANSI Patent Policy”), and hereby gives the following notice pursuant to that policy:NOTICE: The users attention is called to the possibility that compliance with an NFPA Document may require use of an invention covered by patent rights. NFPA takes no position as to the v

20、alidity of any such patent rights or as to whether such patent rights constitute or include essential patent claims under the ANSI Patent Policy. If, in connection with the ANSI Patent Policy, a patent holder has filed a statement of willingness to grant licenses under these rights on reasonable and

21、 nondiscriminatory terms and conditions to applicants desiring to obtain such a license, copies of such filed statements can be obtained, on request, from NFPA. For further information, contact the NFPA at the address listed below.Law and Regulations Users of NFPA Documents should consult applicable

22、 federal, state, and local laws and regulations. NFPA does not, by the publication of its codes, standards, recommended practices, and guides, intend to urge action that is not in compliance with applicable laws, and these documents may not be construed as doing so.Copyrights NFPA Documents are copy

23、righted. They are made available for a wide variety of both public and private uses. These include both use, by reference, in laws and regulations, and use in private self-regulation, standardization, and the promotion of safe practices and methods. By making these documents available for use and ad

24、option by public authorities and private users, the NFPA does not waive any rights in copyright to these documents. Use of NFPA Documents for regulatory purposes should be accomplished through adoption by reference. The term “adoption by reference” means the citing of title, edition, and publishing

25、information only. Any deletions, additions, and changes desired by the adopting authority should be noted separately in the adopting instrument. In order to assist NFPA in following the uses made of its documents, adopting authorities are requested to notify the NFPA (Attention: Secretary, Standards

26、 Council) in writing of such use. For technical assistance and questions concerning adoption of NFPA Documents, contact NFPA at the address below.For Further Information All questions or other communications relating to NFPA Documents and all requests for information on NFPA procedures governing its

27、 codes and standards development process, including information on the procedures for requesting Formal Interpretations, for proposing Tentative Interim Amendments, and for proposing revisions to NFPA documents during regular revision cycles, should be sent to NFPA headquarters, addressed to the att

28、ention of the Secretary, Standards Council, NFPA, 1 Batterymarch Park, P.O. Box 9101, Quincy, MA 02269-9101; email: stds_adminnfpa.orgFor more information about NFPA, visit the NFPA website at www.nfpa.org.12/11Copyright 2013 National Fire ProtectionAssociation.All Rights Reserved.NFPA705Recommended

29、 Practice for aField Flame Test for Textiles and Films2013 EditionThis edition of NFPA705, Recommended Practice for a Field Flame Test forTextiles and Films, waspreparedbytheTechnicalCommitteeonFireTests.ItwasissuedbytheStandardsCouncilonNovember 27, 2012, with an effective date of December 17, 2012

30、, and supersedes all previouseditions.This edition of NFPA 705 was approved as an American National Standard on Decem-ber 17, 2012.Origin and Development of NFPA 705The 1993 edition of NFPA705 was a complete revision of what was Chapter 10, Field Test:Match Flame Test, in the 1989 edition of NFPA 70

31、1, Standard Methods of Fire Tests for Flame-Resistant Textiles and Films. Due to the lack of data demonstrating a relationship between thefield match test and NFPA 701 small- or large-scale testing, the Committee determined itwould be appropriate to create this document so as not to perpetuate any a

32、pplication of acorrelation. The field match test does not incorporate the more rigorous laboratory testingmethods incorporated into the small- and large-scale testing such as conditioning of speci-men, reproducibility, and repeatability. The revisions to NFPA 705 incorporated an increasein safety pr

33、ecautions during the testing procedure, type of ignition source, and removal ofsample prior to testing.The 1997 edition of NFPA705 was a reconfirmation of the earlier edition.For the 2003 edition, the chapter layout of NFPA 705 was reorganized to meet the Manual ofStyle for NFPATechnical Committee D

34、ocuments.The 2009 edition added references toASTM E 84 and NFPA265 for testing interior finishmaterials.The 2013 edition includes updates to referenced standards, and terminology. A new sectionandannexnotehavebeenaddedtoclarifythatNFPA705shouldnotbeusedfortextilecoverings.7051NFPAand National Fire P

35、rotectionAssociation are registered trademarks of the National Fire ProtectionAssociation, Quincy, Massachusetts 02169.Technical Committee on Fire TestsBarry L. Badders, Jr., ChairSouthwest Research Institute, TX RTFarid Alfawakhiri, American Iron and Steel Institute,IL MJesse J. Beitel, HughesAssoc

36、iates, Inc., MD SERhonda P. Byrne, QAI Laboratories, CARTGordon H. Damant, Inter-City Testing therefore, they should not be relied upon when more defini-tive test data are available.1.3 Application.1.3.1 These recommendations apply to materials used in theinterior of buildings, for protective outdoo

37、r coverings such astarpaulins and tents, and for plastic films (with or without re-inforcing or backing) used for decorative or other purposesinside buildings or as temporary or permanent enclosures forbuildings under construction.1.3.1.1* The field test method can be useful to regulatory offi-cials

38、 as an indicator of whether a material being used or in-stalled burns very easily or can be flame resistant as indicatedby the following:(1) Cessation of burning when the igniting flame is removed(2) Failure to burn at all(3) Continuing to burn nonaggressively after the ignitingflame is removed1.3.1

39、.2 The field test method has utility only when the au-thority having jurisdiction has no reliable data and, therefore,is forced to rely solely on the field test findings.1.3.1.3 There are only two types of materials for which the fieldtest method can be deemed to provide foolproof and totally ad-equ

40、ate results: those made entirely of noncombustible inorganicmaterial and those that ignite and burn readily on exposure to asmall flame. For example, with only limited experience, an in-spector will have no difficulty in identifying an all-mineral fiberfabric by employing a small open flame, and no

41、other procedureis necessary. The only effect a small fire exposure has on a min-eral fiber fabric is to burn off the surface coloring, if any, leavingthe threads themselves virtually undamaged. This result is notobtained with any other type of decorative fabric and, therefore,is readily recognized.

42、At the other extreme, if a material ignitesand burns readily from the application of a small open flamefrom a source such as a kitchen match, showing no semblance offlame resistance, no other procedure is necessary, since the ma-terial obviously is not acceptable.1.3.1.4 Between these two extremes,

43、the field test method has alimited and varying degree of reliability. Within this large group,whichcomprisesthegreatmajorityofmaterialstheenforcementofficial is likely to encounter in the field, the most reliable resultsare obtained in the testing of cellulose-based materials (cotton,rayon,andpaper)

44、thatareflameretardanttreatedwiththecom-mon inorganic salt formulations. These materials retain theirshape reasonably during testing, and the results are not greatlyaffected by differences in sample size or severity of fire exposure.However, the least-reliable results are obtained with chemicallytrea

45、tedfabricsofsyntheticfibersorflexibleplasticfilmsandlami-nates.These materials are subject to a variety of physical changeswhen exposed to fire, such as shrinking, curling, melting, elon-gating, and similar distortions, making the examination of smallsamples quite difficult and the results ambiguous

46、. Furthermore,some of these thermoplastic materials are apt to appear flameresistant with small flame exposures but ignite and burn fiercelywith longer exposures to larger ignition sources.1.3.2* This recommended practice should not be used to de-termine that a textile material or a film is flame re

47、tardant.1.3.3* This recommended practice does not apply to textilewall coverings or to textile ceiling coverings.1.3.4 Materials applied to surfaces of buildings or backing ma-terials as interior finishes in buildings should be tested and clas-sified in accordance with ASTM E 84, Standard Test Metho

48、d forSurface Burning Characteristics of Building Materials, or NFPA 286,Standard Methods of Fire Tests for Evaluating Contribution of Wall andCeiling Interior Finish to Room Fire Growth. In the case of textile wallcoverings, the use of NFPA 265, Standard Methods of Fire Tests forEvaluating Room Fire

49、 Growth Contribution of Textile or Expanded VinylWall Coverings on Full Height Panels and Walls, is also appropriate.Chapter 2 Referenced Publications2.1 General. The documents or portions thereof listed in thischapterarereferencedwithinthisrecommendedpracticeandshould be considered part of the recommendations of thisdocument.7054 FIELD FLAME TEST FOR TEXTILES AND FILMS2013 Edition2.2 NFPA Publications. National Fire Protection Association,1 Batterymarch Park, Quincy, MA02169-7471.NFPA 265, Standard Methods of Fire Tests for Evaluating RoomFire Growth Contribution of Te