臭氧气体分析仪

1、ational forewordThis British Standard is the UK implementation of EN 61207-1:2010. It isidentical to IEC 61207-1:2010. It supersedes BS EN 61207-1:1994, which willbe withdrawn on 1 July 2013.The UK participation in its preparation was entrusted by Technical CommitteeGEL/65, Measurement and control, to Subcommittee GEL/65/2, Elements ofsystems.A list of organizations represented on this committee can be obtained onrequest to its secretary.This publication does not purport to include all the neces。

2、the use of this Commercial Item Description (CID) as a replacement for Military Specification MIL-A-18218B which is cancelled, Abstract. the volumetric percentage of C02, This CID covers portable Orsat-type analyzers for the measurement of 02, and CO occurring in flue-gases. 1. Classification. Flue-gas analyzers shall be of the following sizes, as specified in the contract or order: Size 1 - 100 milliliters (mL). Size 2 - 50 mL. Salient characteristics 1. Description. The analyzer shall be a met。

3、lfltigung, auch auszugsweise, nur mit Genehmigung des DIN Deutsches Institut fr Normung e. V., Berlin, gestattet.ICS 71.040.40!%FW“2355299www.din.deDDIN EN 61207-6Angabe zum Betriebsverhalten von Gasanalysatoren Teil 6: Fotometrische Analysatoren (IEC 612076:2014);Deutsche Fassung EN 612076:2015Expression of performance of gas analyzers Part 6: Photometric analyzers (IEC 612076:2014);German version EN 612076:2015Expression des performances des analyseu。

4、 ISO 15337:2009 Ambient air Gas phase titration Calibration of analysers for ozone (IDT) 2014 153372013 II 27 2002 . 184- , 1.0 2004 . &#。

5、dardwas published under theauthority of the StandardsPolicy and StrategyCommittee on 31 May 2009 BSI 2009ISBN 978 0 580 58658 3Amendments/corrigenda issued since publicationDate CommentsBS ISO 15337:2009National forewordThis British Standard is the UK implementation of ISO 15337:2009.The UK participation in its preparation was entrusted to TechnicalCommittee EH/2/3, Ambient atmospheres.A list of organizations represented on this committee can be obtained onrequest to its secretary.This pub。

6、0.40Gas analyzers Expression of performance Part 3: Paramagnetic oxygen analyzers(IEC 61207-3:2002); German version EN 61207-3:2002Analyseurs de gaz Expression des qualits de fonctionnement Partie 3: Analyseurs doxygne paramagntiques(CEI 61207-3:2002); Version allemande EN 61207-3:2002Die Europische Norm EN 61207-3:2002 hat den Status einer Deutschen Norm.Beginn der GltigkeitDie EN 61207-3 wurde am 2002-05-01 angenommen.Nationales VorwortFr die vorliege。

7、旷本检定规程经国家计量局于1988年3月20日批准，并自1989年2月1日起施行.归口单位:_t海市标准计量管理局起草单位:上海市测试技术研究所本规程技术条文由起草单位负责解挥.本规程主要起草人，顾强龙(上海市测试技术研究所目录概述. .,., 1. . . , . . . , . t. t t ( 1 ) -技术要求.，. (1) 一检定条件.f.，.-.(3) 四检定项目和检定方法. . . . . . . . . (4) 五检定结果的处理和检定周期.(1 0) 附录1pH标准榕掖.f. ,. ,. .t .,. ft f.t. (11。

8、1 1 范围-2 规范性引用文件-3 术语和定义4 要求25 试验条件46 试验方法7 检验规则-8 标志、包装、运输和贮存109 质量保证期GB/T 25476-2010 目。
吕本标准由中国机械工业联合会提出。
本标准由全国工业过程测量和控制标准化技术委员会CSAC/TC124)归口。
本标准由聚光科技(杭州)有限公司负责起草，杭州电子科技大学、上海市计量测试技术研究院、北京北分麦哈克分析仪器有限公司、北京分析仪器研究所等参加起草。
本标准主要起草人:王健、陈人、郭晓维、王欣援、蔡建华、郭肇新、马雅娟。
I GB/T 25476-2010 可调谐激光气体分析仪1 范围本标准规。

9、t isidentical to IEC 61207-6:2014. It supersedes BS EN 61207-6:1994, which willbe withdrawn on 30 December 2017.The UK participation in its preparation was entrusted by Technical Com-mittee GEL/65, Measurement and control, to Subcommittee GEL/65/2,Elements of systems.A list of organizations represented on this committee can be obtained onrequest to its secretary.This publication does not purport to include all the necessary provisions ofa contract. Users are responsible for its correct applicati。

10、ard UDC 621.317.79:543.27:543.25:543.4BSEN61207-6:1994 This British Standard, having been prepared under the directionof the Electrotechnical Sector Board, was published underthe authority of the Standards Board and comes intoeffect on 15 December 1994 BSI 10-1999 The following BSI references relate to the work on this standard: Committee reference PCL/1 Draft for comment 90/23869 DC ISBN 0 580 23534 3 Cooperating organizations The European Committee for Electrotechnical Standardization (。

11、 Standard is the UK implementation of EN 61207-7:2013. It isidentical to IEC 61207-7:2013, incorporating corrigendum June 2015.The UK participation in its preparation was entrusted by Technical Com-mittee GEL/65, Measurement and control, to Subcommittee GEL/65/2,Elements of systems.A list of organizations represented on this subcommittee can be obtained onrequest to its secretary.This publication does not purport to include all the necessary provisions ofa contract. Users are responsible for its。