NEMA NTCIP 8003-2001 National Transportation Communications for ITS Protocol Profile Framework (v01 08)《国家运输ITS通信协议 设置文件框架(版本01 08)》.pdf

《NEMA NTCIP 8003-2001 National Transportation Communications for ITS Protocol Profile Framework (v01 08)《国家运输ITS通信协议 设置文件框架(版本01 08)》.pdf》由会员分享，可在线阅读，更多相关《NEMA NTCIP 8003-2001 National Transportation Communications for ITS Protocol Profile Framework (v01 08)《国家运输ITS通信协议 设置文件框架(版本01 08)》.pdf（28页珍藏版）》请在麦多课文档分享上搜索。

1、A Joint Publication of:American Association of State Highway and Transportation Officials (AASHTO) Institute of Transportation Engineers (ITE)National Electrical Manufacturers Association (NEMA)NTCIP Standards PublicationNTCIP 8003:2001 v01.08National TransportationCommunications for ITS ProtocolPro

2、file FrameworkA Joint Standard of AASHTO, ITE, and NEMAA Joint Information Management Policy of AASHTO, ITE, and NEMA NTCIP 8003:2001 v01.08National Transportation Communications for ITS Protocol Profile Framework December 2001 Published byAmerican Association of State Highway and Transportation Off

3、icials (AASHTO) 444 North Capitol Street, N.W., Suite 249 Washington, D.C. 20001 Institute of Transportation Engineers (ITE)1099 14th Street, N.W., Suite 300 West Washington, D.C. 20005-3438 National Electrical Manufacturers Association (NEMA)1300 North 17th Street, Suite 1847 Rosslyn, Virginia 2220

4、9-3801 2001 AASHTO / ITE / NEMA. All rights reserved. 2001 by the American Association of State Highway and Transportation Officials (AASHTO), the Institute of Transportation Engineers (ITE), and the National Electrical Manufacturers Association (NEMA). All intellectual property rights are reserved,

5、 except as described as follows, by the copyright owners under the laws of the United States of America, the Universal Copyright Convention, the Berne Convention, and the International and Pan American Copyright Conventions. Permission to reproduce, distribute, and/or translate into other languages

6、is granted provided that: (1) this copyright notice appears on the front of the document, (2) “ 2001 AASHTO / ITE / NEMA” appears on every page of the text, and (3) the text is not edited or used out of context. NTCIP 8003:2001 v01.08 Page i 2001 AASHTO / ITE / NEMA ACKNOWLEDGEMENTS This publication

7、 was prepared by the NTCIP Profiles Working Group, which is a subdivision of the Joint Committee on the NTCIP. The Joint Committee is organized under a Memorandum of Understanding among the American Association of State Highway and Transportation Officials (AASHTO), the Institute of Transportation E

8、ngineers (ITE), and the National Electrical Manufacturers Association (NEMA). The Joint Committee on the NTCIP consists of six representatives from each of the standards organizations, and provides guidance for NTCIP development. At the time that this document was prepared, the following individuals

9、 were active members of the NTCIP Profiles Working Group: Robert De Roche (Chair) Robert Force W. L. (Bud) Kent Gary Meredith Alexis Mousadi Brian Paulsmeyer Mike Robinson Nu Rosenbohm Kenneth Vaughn Hoi Wong Other individuals providing input to the document include: Joey Baumgartner Al Bonificio Ph

10、il Cabooter Ken Earnest Michael Forbis Joseph Herr Dave Kingery Doug Lowe Don Ninke Jeff Racz Ray Starr Dan Vanada In addition to the many volunteer efforts, recognition is also given to those organizations who supported the efforts of the working groups by providing comments and funding for the sta

11、ndard, including: ARINC, Inc. Caltrans Eagle Traffic Control Systems Econolite Control Products, Inc Minnesota Department of Transportation Ministry of Transportation, Ontario Naztec, Inc. New York State DOT Odetics ITS, Inc. PB Farradyne, Inc. Peek Traffic Systems, Inc. Skyline Products Southwest R

12、esearch Institute Texas DOT NTCIP 8003:2001 v01.08 Page ii Vanasse, Hagen May 2000 ITE Informational Report; May 2001 NEMA Authorized Engineering Information; May 2001 History From 1997 to 1999, this document was referenced as TS 3.PRO. However, to provide an organized numbering scheme for the NTCIP

13、 documents, this document is now referenced as NTCIP 8003. The technical specifications of NTCIP 8003 are identical to the former reference, except as noted in the development history below: TS 3.PRO v97.01.08. December 1997 Accepted as a User Comment Draft by the Joint Committee on the NTCIP. NTCIP

14、 8003 v01.07. July 1999 Version 01.05 accepted as a Recommended Standard by the Joint Committee on the NTCIP. In January 2000, the NTCIP Standards Bulletin B0047 reported that typographic corrections were included in v01.06. Approved by AASHTO in May 2000. Version 01.07 approved by ITE and NEMA in M

15、ay 2001 after disposition of a Letter Ballot comment.NTCIP 8003 v01.08. December 2001 Reformatted for printing: incremented version number and updated date; modified and reorganized front matter to conform to NTCIP 8002; updated headers, footers, and page numbers. NTCIP 8003:2001 v01.08 Page iv NTCI

16、P 8003:2001 v01.08 Page v 2001 AASHTO / ITE / NEMA INTRODUCTION The context of the NTCIP is one part of the Intelligent Transportation Systems standardization activities covering base standards, profiles, and registration mechanisms. Base Standards define procedures and rules for providing the funda

17、mental operations associated with communications and information that is exchanged over fixed-point communications links. Profiles define subsets or combinations of base standards used to provide specific functions or services. Profiles prescribe particular subsets or options available in base stand

18、ards necessary for accomplishing a particular function or service. This provides a basis for the development of uniform, nationally recognized conformance. Registration Mechanisms provide a means to specify and uniquely identify detailed parameters within the framework of base standards and/or profi

19、les. The Profiles Working Group is concerned with the methodology of defining profiles and their documentation in Standards Publications. The purpose of this standard is to provide the principles and a classification scheme for the development of NTCIP profiles. This standard also defines aspects of

20、 the formatting and technical content of profiles that conform to this standard. The objective is to facilitate the specification of ITS characterized by a high degree of interoperability and interchangeability of its components. In 1992, the NEMA 3-TS Transportation Management Systems and Associate

21、d Control Devices Section began the effort to develop the NTCIP. Under the guidance of the Federal Highway Administrations NTCIP Steering Group, the NEMA effort was expanded to include the development of communications standards for all transportation field devices that could be used in an ITS netwo

22、rk. In September 1996, an agreement was executed among AASHTO, ITE, and NEMA to jointly develop, approve, and maintain the NTCIP standards. In August 1997, the Joint Committee on the NTCIP formed a new working group to develop a method for organizing class profiles. The Profiles WG first met in Sept

23、ember 1997. After research into how national and international standards organizations combine protocols and standards to address all seven layers of the ISO-OSI Reference Model, the committee adopted the approach defined in the NTCIP Profile Framework. Following that approach, a protocol stack is s

24、pecified by application, transport, and subnetwork profiles. An application profile addresses the application, presentation, and session layers. A transport profile addresses the transport and network layers. A subnetwork profile addresses the data link and physical layers. NTCIP 8003:2001 v01.08 Pa

25、ge vi If you are not willing to abide by the following notice, return these materials immediately. DisclaimerThe information in this publication was considered technically sound by the consensus of persons engaged in the development and approval of the document at the time it was developed. Consensu

26、s does not necessarily mean that there is unanimous agreement among every person participating in the development of this document. AASHTO, ITE, and NEMA standards and guideline publications, of which the document contained herein is one, are developed through a voluntary consensus standards develop

27、ment process. This process brings together volunteers and/or seeks out the views of persons who have an interest in the topic covered by this publication. While AASHTO, ITE, and NEMA administer the process and establish rules to promote fairness in the development of consensus, they do not write the

28、 document and they do not independently test, evaluate, or verify the accuracy or completeness of any information or the soundness of any judgments contained in their standards and guideline publications. AASHTO, ITE, and NEMA disclaim liability for any personal injury, property, or other damages of

29、 any nature whatsoever, whether special, indirect, consequential, or compensatory, directly or indirectly resulting from the publication, use of, application, or reliance on this document. AASHTO, ITE, and NEMA disclaim and make no guaranty or warranty, express or implied, as to the accuracy or comp

30、leteness of any information published herein, and disclaims and makes no warranty that the information in this document will fulfill any of your particular purposes or needs. AASHTO, ITE, and NEMA do not undertake to guarantee the performance of any individual manufacturer or sellers products or ser

31、vices by virtue of this standard or guide. In publishing and making this document available, AASHTO, ITE, and NEMA are not undertaking to render professional or other services for or on behalf of any person or entity, nor are AASHTO, ITE, and NEMA undertaking to perform any duty owed by any person o

32、r entity to someone else. Anyone using this document should rely on his or her own independent judgment or, as appropriate, seek the advice of a competent professional in determining the exercise of reasonable care in any given circumstances. Information and other standards on the topic covered by t

33、his publication may be available from other sources, which the user may wish to consult for additional views or information not covered by this publication. AASHTO, ITE, and NEMA have no power, nor do they undertake to police or enforce compliance with the contents of this document. AASHTO, ITE, and

34、 NEMA do not certify, test, or inspect products, designs, or installations for safety or health purposes. Any certification or other statement of compliance with any health or safetyrelated information in this document shall not be attributable to AASHTO, ITE, or NEMA and is solely the responsibilit

35、y of the certifier or maker of the statement. NTCIP is a trademark of AASHTO / ITE / NEMA.NTCIP 8003:2001 v01.08 Page vii 2001 AASHTO / ITE / NEMA CONTENTS Section 1 GENERAL.1-11.1 Scope1-11.2 References1-11.3 Definitions .1-21.4 Abbreviations and Acronyms 1-3Section 2 PRINCIPLES AND FRAMEWORK OF NT

36、CIP PROFILES 2-12.1 Profiles 2-12.1.1 Relationship to Base Standards.2-12.1.2 Principles of Profile Content.2-12.1.3 The Meaning of Conformance to a Profile .2-12.1.4 Conformance Requirements of Profiles.2-22.2 Principles Defining Format and Content .2-22.3 ISO/IEC Profile Standards 2-22.4 NTCIP Sta

37、ndardized Profiles 2-32.5 NTCIP Profile Classification2-52.5.1 NTCIP Device Profiles .2-52.5.2 NTCIP Information Profiles 2-52.5.3 NTCIP Applications Profiles.2-52.5.4 NTCIP Transport Profiles.2-62.5.5 NTCIP Subnetwork Profiles .2-62.5.6 NTCIP (Communications) Class Profiles.2-6Annex A RULES FOR DRA

38、FTING AND PRESENTATION OF STANDARDIZED PROFILES . A-1A.1 Introduction A-1A.2 Structure of Standardized Profiles . A-1A.3 Preliminary Elements . A-1A.3.1 Title Page A-1A.3.2 Table of Contents A-2A.3.3 Foreword. A-2A.3.4 Introduction .A-2A.4 General Normative Elements. A-2A.4.1 Scope A-2A.4.2 Referenc

39、es A-2A.5 Technical Normative Elements A-3A.5.1 Definitions . A-3A.5.2 Abbreviations (and Acronyms) A-3A.5.3 Requirements A-3A.5.4 Interoperability Subclause. A-3A.5.5 Normative Annexes. A-3A.5.6 Notation. A-5A.6 Supplemental Elements . A-6A.6.1 Informative Annexes . A-6NTCIP 8003:2001 v01.08 Page v

40、iii NTCIP 8003:2001 v01.08 Page 1-1 2001 AASHTO / ITE / NEMA Section 1 GENERAL 1.1 SCOPE This standard is applicable to traffic control and transportation related devices which must operate in an Integrated Transportation System. This standard develops the terminology, content, structure, and organi

41、zation of standardized profiles. 1.2 REFERENCES For approved amendments, contact: NTCIP Coordinator National Electrical Manufacturers Association 1300 North 17th Street, Suite 1847 Rosslyn, VA 22209-3801 fax: (703) 841-3331 e-mail: ntcipnema.org For draft amendments of this document, which are under

42、 discussion by the relevant NTCIP Working Group, and recommended revisions of the NTCIP Joint Committee, visit the World Wide Web at http:/www.ntcip.org. The following documents and standards may provide a more complete understanding of the structure and use of profiles. Guide to Open System Specifi

43、cations - The Taxonomy of Profiles, European Workshop for Open Systems, http:/www.ewos.be/common/taxonmy.htm, February 16, 1999 Guide to Open Systems Specification - Conformance, Interoperability and Testing, European Workshop for Open Systems, http:/www.ewos.be/ct/eguide.htm, February 16, 1999 US-D

44、epartment of Defense Internet Related Standardized Profiles Index, DISA Internet Librarian, http:/www-library.itsi.disa.mil/org/mil_std.html, October 31, 1997 American National Standards Institute (ANSI) 11 West 42nd Street, 13th Floor New York, NY 10036 ISO/IEC TR 10000-1:1995 Information Technolog

45、yFramework and Taxonomy of International Standardized Profiles -Part 1: General Principles and Documentation FrameworkISO/IEC TR 10000-2:1995 Information TechnologyFramework and Taxonomy of International Standardized Profiles -Part 2: Principles and Taxonomy for OSI profilesNTCIP 8003:2001 v01.08 Pa

46、ge 1-2 National Electrical Manufacturers Association 1300 North 17th Street, Suite 1847 Rosslyn, VA 22209-3801 NEMA NS 1-1995 Guide for Preparation of NEMA Standards Publications At the time of publication, the editions indicated were valid. All standards are subject to revision, and parties to agre

47、ements based on this Standard are encouraged to investigate the possibility of applying the most recent editions of the standards listed above. 1.3 DEFINITIONS For the purposes of this standard, the following definitions apply: Application Layer: That portion of the OSI Reference Model (Layer 7) tha

48、t provides access to the communications services. data: Information before it is interpreted. Data Link Layer: That portion of the OSI Reference Model (Layer 2) responsible for flow control, framing, synchronization, and error control over a communications link. datagram: A self-contained unit of da

49、ta transmitted independently of other datagrams. end-application: A process or program using the communications stack. end system: The source or destination of an information exchange. host: (Internet usage) The physical and/or logical part of the end-systems application. A computer attached to one or more networks that supports users and runs application programs. Intelligent Transportation Systems: A major national initiative to apply information, communication and control tec