NEMA NTCIP 1204-2009 National Transportation Communications for ITS Protocol - Environmental Sensor Station (ESS) Interface Protocol (Version 03 Includes Errata 9 2014).pdf

《NEMA NTCIP 1204-2009 National Transportation Communications for ITS Protocol - Environmental Sensor Station (ESS) Interface Protocol (Version 03 Includes Errata 9 2014).pdf》由会员分享，可在线阅读，更多相关《NEMA NTCIP 1204-2009 National Transportation Communications for ITS Protocol - Environmental Sensor Station (ESS) Interface Protocol (Version 03 Includes Errata 9 2014).pdf（393页珍藏版）》请在麦多课文档分享上搜索。

1、A Joint Publication of:American Association of State Highway and Transportation Officials (AASHTO) Institute of Transportation Engineers (ITE)National Electrical Manufacturers Association (NEMA)NTCIP Standards PublicationNTCIP 1204:2009 v3.08National TransportationCommunications for ITS ProtocolEnvi

2、ronmental Sensor Station (ESS) Interface ProtocolA Joint Standard of AASHTO, ITE, and NEMAA Joint Standard of AASHTO, ITE, and NEMA NTCIP 1204 version v03 National Transportation Communications for ITS Protocol Environmental Sensor Station (ESS) Interface Protocol published in October 2009 Published

3、 by American Association of State Highway and Transportation Officials (AASHTO) 444 North Capitol Street, N.W., Suite 249 Washington, D.C. 20001 Institute of Transportation Engineers (ITE) 1099 14thStreet, N.W., Suite 300 West Washington, D.C. 20005-3438 National Electrical Manufacturers Association

4、 (NEMA) 1300 North 17th Street, Suite 1752 Rosslyn, Virginia 22209-3801 file version 1204 v03.08p2 IHS-2009b 2009 AASHTO / ITE / NEMA. All rights reserved. A Joint Errata of AASHTO, ITE, and NEMA NTCIP 1204 version v03 Errata National Transportation Communications for ITS Protocol Environmental Sens

5、or Station (ESS) Interface ProtocolErrata An Errata for NTCIP 1204 v03 (errata published in September 2014) Published by American Association of State Highway and Transportation Officials (AASHTO) 444 North Capitol Street, N.W., Suite 249 Washington, D.C. 20001 Institute of Transportation Engineers

6、(ITE) 1627 I (“Eye”) Street, N.W., Suite 600 Washington, D.C. 20006 National Electrical Manufacturers Association (NEMA) 1300 North 17th Street, Suite 900 Rosslyn, Virginia 22209-3801 file version 1204 v03.08Erratap 2014 AASHTO / ITE / NEMA. All rights reserved. NOTICES Copyright Notice 2014 by the

7、American Association of State Highway and Transportation Officials (AASHTO), the Institute of Transportation Engineers (ITE), and the National Electrical Manufacturers Association (NEMA). All intellectual property rights, including, but not limited to, the rights of reproduction, translation, and di

8、splay are reserved under the laws of the United States of America, the Universal Copyright Convention, the Berne Convention, and the International and Pan American Copyright Conventions. Except as licensed or permitted, you may not copy these materials without prior written permission from AASHTO, I

9、TE, or NEMA. Use of these materials does not give you any rights of ownership or claim of copyright in or to these materials. Visit www.ntcip.org for other copyright information, for instructions to request reprints of excerpts, and to request reproduction that is not granted below. PDF File License

10、 Agreement To the extent that these materials are distributed by AASHTO / ITE / NEMA in the form of an Adobe Portable Document Format (PDF) electronic data file (the “PDF file”), AASHTO / ITE / NEMA authorizes each registered PDF file user to view, download, copy, or print the PDF file available fro

11、m the authorized Web site, subject to the terms and conditions of this license agreement: a) you may download one copy of each PDF file for personal, noncommercial, and intraorganizational use only; b) ownership of the PDF file is not transferred to you; you are licensed to use the PDF file; c) you

12、may make one more electronic copy of the PDF file, such as to a second hard drive or burn to a CD; d) you agree not to copy, distribute, or transfer the PDF file from that media to any other electronic media or device; e) you may print one paper copy of the PDF file; f) you may make one paper reprod

13、uction of the printed copy; g) any permitted copies of the PDF file must retain the copyright notice, and any other proprietary notices contained in the file; h) the PDF file license does not include (1) resale of the PDF file or copies, (2) republishing the content in compendiums or anthologies, (3

14、) publishing excerpts in commercial publications or works for hire, (4) editing or modification of the PDF file except those portions as permitted, (5) posting on network servers or distribution by electronic mail or from electronic storage devices, and (6) translation to other languages or conversi

15、on to other electronic formats; i) other use of the PDF file and printed copy requires express, prior written consent. TRF Distribution Permission A Testing Requirements Form (“TRF”) may be a Testing Requirements Traceability Table and/or Test Procedures. To the extent that these materials are distr

16、ibuted by AASHTO / ITE / NEMA in the form of a TRF, AASHTO / ITE / NEMA extend the following permission: a) you may make and/or distribute unlimited electronic or hard copies, including derivative works of the TRF, provided that each copy you make and/or distribute contains the citation “Based on NT

17、CIP 0000 insert the standard number TRF. Used by permission. Original text AASHTO / ITE / NEMA.”; b) you may not modify the logical flow of any test procedure, without clearly noting and marking any such modification; and c) if the TRF excerpt is made from an unapproved draft, add to the citation “T

18、RF excerpted from a draft standard containing preliminary information that is subject to change.” Content and Liability Disclaimer The information in this publication was considered technically sound by the consensus of persons engaged in the development and approval of the document at the time it w

19、as developed. Consensus does not necessarily mean that there is unanimous agreement among every person participating in the development of this document. AASHTO, ITE, and NEMA standards and guideline publications, of which the document contained herein is one, are developed through a voluntary conse

20、nsus standards development process. This process brings together volunteers and seeks out the views of persons who have an interest in the topic covered by this publication. While AASHTO, ITE, and NEMA administer the process and establish rules to promote fairness in the development of consensus, th

21、ey do not write the document and they do not independently test, evaluate, or verify the accuracy or completeness of any information or the soundness of any judgments contained in their standards and guideline publications. AASHTO, ITE, and NEMA disclaim liability for any personal injury, property,

22、or other damages of any nature whatsoever, whether special, indirect, consequential, or compensatory, directly or indirectly resulting from the publication, use of, application, or reliance on this document. AASHTO, ITE, and NEMA disclaim and make no guaranty or warranty, express or implied, as to t

23、he accuracy or completeness of any information published herein, and disclaims and makes no warranty that the information in this document will fulfill any of your particular purposes or needs. AASHTO, ITE, and NEMA do not undertake to guarantee the performance of any individual manufacturer or sell

24、ers products or services by virtue of this standard or guide. In publishing and making this document available, AASHTO, ITE, and NEMA are not undertaking to render professional or other services for or on behalf of any person or entity, nor are AASHTO, ITE, and NEMA undertaking to perform any duty o

25、wed by any person or entity to someone else. Anyone using this document should rely on his or her own independent judgment or, as appropriate, seek the advice of a competent professional in determining the exercise of reasonable care in any given circumstances. Information and other standards on the

26、 topic covered by this publication may be available from other sources, which the user may wish to consult for additional views or information not covered by this publication. AASHTO, ITE, and NEMA have no power, nor do they undertake to police or enforce compliance with the contents of this documen

27、t. AASHTO, ITE, and NEMA do not certify, test, or inspect products, designs, or installations for safety or health purposes. Any certification or other statement of compliance with any health or safety-related information in this document shall not be attributable to AASHTO, ITE, or NEMA and is sole

28、ly the responsibility of the certifier or maker of the statement. Trademark Notice NTCIP is a trademark of AASHTO / ITE / NEMA. All other marks mentioned in this standard are the trademarks of their respective owners. NTCIP 1204 v3.08 Errata Page i 2014 AASHTO / ITE / NEMA Do Not Copy Without Writte

29、n Permission FOREWORD This errata is associated with NTCIP 1204 v03, an NTCIP standards publication, which identifies and defines how a management station may wish to interface with a field device to control and monitor pavement sensors, weather stations, air quality monitors, and other equipment re

30、lated to the monitoring of and response to environmental conditions in an NTCIP-conformant fashion. This errata corrects Step numbering errors identified in Annex C, Test Procedures Normative, specifically, within in the following test cases, in the Step range identified: a) C.2.3.2.6 Configure Pave

31、ment Sensor (Steps 14-15) (Page 183-184) b) C.2.3.2.7 Configure Subsurface Sensor (Steps 12-14) (Page 185-186) c) C.2.3.3.7 Retrieve Precipitation Presence (Steps 1-9.1, corrected to Steps 1-9) (Page 208-209) d) C.2.3.3.10 Retrieve Solar Radiation (Steps 1-6; Steps 6.1-7.1) (Page 214-215) e) C.2.3.4

32、.1 Retrieve Pavement Surface Condition (Steps 4-18; Steps 18.1-19.1) (Page 226-227) f) C.2.3.4.2 Retrieve Icing ConditionsActive (Steps 2-20.1) (Page 228-229) g) C.2.3.4.3 Retrieve Icing ConditionsPassive (Steps 2-3226.10; corrected to Steps 2-26.10) (Page 230-232) h) C.2.3.7.2 Retrieve Snapshot (St

33、eps 7.1-8; Steps 13-210 (corrected to Steps 13-21) (Page 259-260 i) C.2.3.10.1 Explore Data (Steps 2.4.1-2) (Page 288) The page number to be replaced is included in the heading in this errata. Please replace existing pages within your copy of NTCIP 1204 v03 with the following pages, which reflect th

34、e corrections identified in a)-i) preceding. Note: Headers of following pages may not “book” properly. Odd page numbers may appear on a lefthand page, and even page numbers may appear on a righthand page. NTCIP 1204 v03 is also an NTCIP Data Dictionary standard. Data Dictionary standards provide def

35、initions of data elements for use within NTCIP systems; they are approved by AASHTO, ITE, and NEMA through a ballot process, after a recommendation by the NTCIP Joint Committee. For more information about NTCIP standards, visit www.ntcip.org. NTCIP 1204 v3.08 Errata Page ii 2014 AASHTO / ITE / NEMA

36、Do Not Copy Without Written Permission NTCIP 1204 v03.08 Errata Page 2014 AASHTO / ITE / NEMA Do Not Copy Without Written Permission C.2.3.2.6 Configure Pavement Sensor (Page 183-184) Test Case: 2.6 Title: Configure Pavement Sensor Description: This test case verifies that the ESS allows a managemen

37、t station to store configuration information for a specified pavement sensor. Variables: Required_Pavement_Sensors PRL 3.6.8 Pass/Fail Criteria: The device under test (DUT) shall pass every verification step included within the Test Case to pass the Test Case. Step Test Procedure Device 1 CONFIGURE:

38、 Determine the number of pavement sensors required by the specification (PRL 3.6.8). RECORD this information as: Required_Pavement_Sensors 2 Determine a random value between 1 and Required_Pavement_Senosrs. RECORD this information as: Subject_Pavement_Sensor 3 Determine a random DisplayString with a

39、 length between 1 and 255 characters. RECORD this information as: Pavement_Sensor_Location 4 Determine a random number between 1 and 9. RECORD this information as: Pavement_Type 5 Determine a random numbber between 0 and 101. RECORD this information as: Pavement_Exposure 6 GET the following object(s

40、): essPavementSensorLocation.Subject_Pavement_Sensor essPavementType.Subject_Pavement_Sensor essPavementExposure.Subject_Pavement_Sensor Pass / Fail (RFC 1157) 7 Determine the RESPONSE VALUE for essPavementSensorLocation.Subject_Pavement_Sensor. RECORD this information as: Orig_Pavement_Sensor_Locat

41、ion 8 Determine the RESPONSE VALUE for essPavementType.Subject_Pavement_Sensor. RECORD this information as: Orig_Pavement_Type 9 Determine the RESPONSE VALUE for essPavementExposure.Subject_Pavement_Sensor. RECORD this information as: Orig_Pavement_Exposure 10 SET the following object(s) to the valu

42、e(s) shown: essPavementSensorLocation.Subject_Pavement_Sensor = Pavement_Sensor_Location essPavementType.Subject_Pavement_Sensor = Pavement_Type essPavementExposure.Subject_Pavement_Sensor = Pavement_Exposure Pass / Fail (Sec. 3.5.2.1.6) 11 GET the following object(s): essPavementSensorLocation.Subj

43、ect_Pavement_Sensor essPavementType.Subject_Pavement_Sensor essPavementExposure.Subject_Pavement_Sensor Pass / Fail (RFC 1157) 12 VERIFY that the RESPONSE VALUE for essPavementSensorLocation.Subject_Pavement_Sensor is equal to Pavement_Sensor_Location. Pass / Fail (Sec. 5.11.3.2) NTCIP 1204 v03.08 E

44、rrata Page 2014 AASHTO / ITE / NEMA Do Not Copy Without Written Permission 13 VERIFY that the RESPONSE VALUE for essPavementType.Subject_Pavement_Sensor is equal to Pavement_Type. Pass / Fail (Sec. 5.11.3.3) 14 VERIFY that the RESPONSE VALUE for essPavementExposure.Subject_Pavement_Sensor is equal t

45、o Pavement_Exposure. Pass / Fail (Sec. 5.11.3.5) 15 SET the following object(s) to the value(s) shown: essPavementSensorLocation.Subject_Pavement_Sensor = Orig_Pavement_Sensor_Location essPavementType.Subject_Pavement_Sensor = Orig_Pavement_Type essPavementExposure.Subject_Pavement_Sensor = Orig_Pav

46、ement_Exposure Pass / Fail (Sec. 3.5.2.1.6) 16 GET the following object(s): essPavementSensorLocation.Subject_Pavement_Sensor essPavementType.Subject_Pavement_Sensor essPavementExposure.Subject_Pavement_Sensor Pass / Fail (RFC 1157) 17 VERIFY that the RESPONSE VALUE for essPavementSensorLocation.Sub

47、ject_Pavement_Sensor is equal to Orig_Pavement_Sensor_Location. Pass / Fail (Sec. 5.11.3.2) 18 VERIFY that the RESPONSE VALUE for essPavementType.Subject_Pavement_Sensor is equal to Orig_Pavement_Type. Pass / Fail (Sec. 5.11.3.3) 19 VERIFY that the RESPONSE VALUE for essPavementExposure.Subject_Pave

48、ment_Sensor is equal to Orig_Pavement_Exposure. Pass / Fail (Sec. 5.11.3.5) Test Case Results Tested By: Date Tested: Pass / Fail Test Case Notes: NTCIP 1204 v03.08 Errata Page 2014 AASHTO / ITE / NEMA Do Not Copy Without Written Permission C.2.3.2.7 Configure Subsurface Sensor (Page 185-186) Test C

49、ase: 2.7 Title: Configure Subsurface Sensor Description: This test case verifies that the ESS allows a management station to store configuration information for a specified subsurface sensor. Variables: Required_Subsurface_Sensors PRL 3.6.11 Pass/Fail Criteria: The device under test (DUT) shall pass every verification step included within the Test Case to pass the Test Case. Step Test Procedure Device 1 CONFIGURE: Determine the number of subsurface sensors as required by the specification (PRL 3.6.11). RECORD this information as: Required_