NEMA NTCIP 1203-2014 National Transportation Communications for ITS Protocol - Object Definitions for Dynamic Message Signs (DMS) (Formerly NEMA TS 3 6-1997).pdf

《NEMA NTCIP 1203-2014 National Transportation Communications for ITS Protocol - Object Definitions for Dynamic Message Signs (DMS) (Formerly NEMA TS 3 6-1997).pdf》由会员分享，可在线阅读，更多相关《NEMA NTCIP 1203-2014 National Transportation Communications for ITS Protocol - Object Definitions for Dynamic Message Signs (DMS) (Formerly NEMA TS 3 6-1997).pdf（686页珍藏版）》请在麦多课文档分享上搜索。

1、A Joint Publication of:American Association of State Highway and Transportation Officials (AASHTO) Institute of Transportation Engineers (ITE)National Electrical Manufacturers Association (NEMA)NTCIP Standards PublicationNTCIP 2103:2014 v03.05National TransportationCommunications for ITS ProtocolObj

2、ect Definitions for Dynamic Message Signs (DMS)A Joint Standard of AASHTO, ITE, and NEMAA Joint Standard of AASHTO, ITE, and NEMA NTCIP 1203 version v03 National Transportation Communications for ITS Protocol Object Definitions for Dynamic Message Signs (DMS) published September 2014 Published by Am

3、erican Association of State Highway and Transportation Officials (AASHTO) 444 North Capitol Street, N.W., Suite 249 Washington, D.C. 20001 Institute of Transportation Engineers (ITE) 1627 I (“Eye”) Street, N.W., Suite 600 Washington, D.C. 20006-4007 National Electrical Manufacturers Association (NEM

4、A) 1300 North 17th Street, Suite 900 Rosslyn, Virginia 22209-3806 file version 1203 v0305p 2014 AASHTO / ITE / NEMA. All rights reserved NOTICES Copyright Notice 2014 by the American Association of State Highway and Transportation Officials (AASHTO), the Institute of Transportation Engineers (ITE),

5、and the National Electrical Manufacturers Association (NEMA). All intellectual property rights, including, but not limited to, the rights of reproduction, translation, and display are reserved under the laws of the United States of America, the Universal Copyright Convention, the Berne Convention, a

6、nd the International and Pan American Copyright Conventions. Except as licensed or permitted, you may not copy these materials without prior written permission from AASHTO, ITE, or NEMA. Use of these materials does not give you any rights of ownership or claim of copyright in or to these materials.

7、Visit www.ntcip.org for other copyright information, for instructions to request reprints of excerpts, and to request reproduction that is not granted below. PDF File License Agreement To the extent that these materials are distributed by AASHTO / ITE / NEMA in the form of an Adobe Portable Document

8、 Format (PDF) electronic data file (the “PDF file”), AASHTO / ITE / NEMA authorizes each registered PDF file user to view, download, copy, or print the PDF file available from the authorized Web site, subject to the terms and conditions of this license agreement: a) you may download one copy of each

9、 PDF file for personal, noncommercial, and intraorganizational use only; b) ownership of the PDF file is not transferred to you; you are licensed to use the PDF file; c) you may make one more electronic copy of the PDF file, such as to a second hard drive or burn to a CD; d) you agree not to copy, d

10、istribute, or transfer the PDF file from that media to any other electronic media or device; e) you may print one paper copy of the PDF file; f) you may make one paper reproduction of the printed copy; g) any permitted copies of the PDF file must retain the copyright notice, and any other proprietar

11、y notices contained in the file; h) the PDF file license does not include: 1) resale of the PDF file or copies, 2) republishing the content in compendiums or anthologies, 3) publishing excerpts in commercial publications or works for hire, 4) editing or modification of the PDF file except those port

12、ions as permitted, 5) posting on network servers or distribution by electronic mail or from electronic storage devices, and 6) translation to other languages or conversion to other electronic formats; i) other use of the PDF file and printed copy requires express, prior written consent. Data Diction

13、ary and MIB Distribution Permission To the extent that these materials are distributed by AASHTO / ITE / NEMA in the form of a Data Dictionary (“DD”) or Management Information Base (“MIB”), AASHTO / ITE / NEMA extend the following permission: You may make or distribute unlimited copies, including de

14、rivative works, of the DD or MIB, including copies for commercial distribution, provided that: a) each copy you make or distribute contains the citation “Derived from NTCIP 0000 insert the standard number. Used by permission of AASHTO / ITE / NEMA.”; b) the copies or derivative works are not made pa

15、rt of the standards publications or works offered by other standards developing organizations or publishers or as works-for-hire not associated with commercial hardware or software products intended for field implementation; c) use of the DD or MIB is restricted in that the syntax fields may be modi

16、fied only to reflect a more restrictive subrange or enumerated values; d) the description field may be modified but only to the extent that: 1) only those bit values or enumerated values that are supported are listed; and 2) the more restrictive subrange is expressed. These materials are delivered “

17、AS IS” without any warranties as to their use or performance. AASHTO / ITE / NEMA and their suppliers do not warrant the performance or results you may obtain by using these materials. AASHTO / ITE / NEMA and their suppliers make no warranties, express or implied, as to noninfringement of third part

18、y rights, merchantability, or fitness for any particular purpose. In no event will AASHTO / ITE / NEMA or their suppliers be liable to you or any third party for any claim or for any consequential, incidental or special damages, including any lost profits or lost savings, arising from your reproduct

19、ion or use of these materials, even if an AASHTO / ITE / NEMA representative has been advised of the possibility of such damages. Some states or jurisdictions do not allow the exclusion or limitation of incidental, consequential, or special damages, or the exclusion of implied warranties, so the abo

20、ve limitations may not apply to a given user. Use of these materials does not constitute an endorsement or affiliation by or between AASHTO, ITE, or NEMA and the user, the users company, or the products and services of the users company. If the user is unwilling to accept the foregoing restrictions,

21、 he or she should immediately return these materials. PRL and RTM Distribution Permission To the extent that these materials are distributed by AASHTO / ITE / NEMA in the form of a Profile Requirements List (“PRL”) or a Requirements Traceability Matrix (“RTM”), AASHTO / ITE / NEMA extend the followi

22、ng permission: a) you may make or distribute unlimited copies, including derivative works of the PRL (then known as a Profile Implementation Conformance Statement (“PICS”) or the RTM, provided that each copy you make or distribute contains the citation “Based on NTCIP 0000 insert the standard number

23、 PRL or RTM. Used by permission. Original text AASHTO / ITE / NEMA.”; b) you may only modify the PRL or the RTM by adding: 1) text in the Project Requirements column, which is the only column that may be modified to show a products implementation or the project-specific requirements; and/or 2) addit

24、ional table columns or table rows that are clearly labeled as ADDITIONAL for project-unique or vendor-unique features; and c) if the PRL or RTM excerpt is made from an unapproved draft, add to the citation “PRL (or RTM) excerpted from a draft standard containing preliminary information that is subje

25、ct to change.” This limited permission does not include reuse in works offered by other standards developing organizations or publishers, and does not include reuse in works-for-hire, compendiums, or electronic storage devices that are not associated with procurement documents, or commercial hardwar

26、e, or commercial software products intended for field installation. A PICS is a Profile Requirements List which is completed to indicate the features that are supported in an implementation. Visit www.ntcip.org for information on electronic copies of the MIBs, PRLs, and RTMs. TRF Distribution Permis

27、sion A Testing Requirements Form (“TRF”) may be a Testing Requirements Traceability Table and/or Test Procedures. To the extent that these materials are distributed by AASHTO / ITE / NEMA in the form of a TRF, AASHTO / ITE / NEMA extend the following permission: a) you may make and/or distribute unl

28、imited electronic or hard copies, including derivative works of the TRF, provided that each copy you make and/or distribute contains the citation “Based on NTCIP 0000 insert the standard number TRF. Used by permission. Original text AASHTO / ITE / NEMA.”; b) you may not modify the logical flow of an

29、y test procedure, without clearly noting and marking any such modification; and c) if the TRF excerpt is made from an unapproved draft, add to the citation “TRF excerpted from a draft standard containing preliminary information that is subject to change.” Content and Liability Disclaimer The informa

30、tion in this publication was considered technically sound by the consensus of persons engaged in the development and approval of the document at the time it was developed. Consensus does not necessarily mean that there is unanimous agreement among every person participating in the development of thi

31、s document. AASHTO, ITE, and NEMA standards and guideline publications, of which the document contained herein is one, are developed through a voluntary consensus standards development process. This process brings together volunteers and seeks out the views of persons who have an interest in the top

32、ic covered by this publication. While AASHTO, ITE, and NEMA administer the process and establish rules to promote fairness in the development of consensus, they do not write the document and they do not independently test, evaluate, or verify the accuracy or completeness of any information or the so

33、undness of any judgments contained in their standards and guideline publications. AASHTO, ITE, and NEMA disclaim liability for any personal injury, property, or other damages of any nature whatsoever, whether special, indirect, consequential, or compensatory, directly or indirectly resulting from th

34、e publication, use of, application, or reliance on this document. AASHTO, ITE, and NEMA disclaim and make no guaranty or warranty, express or implied, as to the accuracy or completeness of any information published herein, and disclaims and makes no warranty that the information in this document wil

35、l fulfill any of your particular purposes or needs. AASHTO, ITE, and NEMA do not undertake to guarantee the performance of any individual manufacturer or sellers products or services by virtue of this standard or guide. In publishing and making this document available, AASHTO, ITE, and NEMA are not

36、undertaking to render professional or other services for or on behalf of any person or entity, nor are AASHTO, ITE, and NEMA undertaking to perform any duty owed by any person or entity to someone else. Anyone using this document should rely on his or her own independent judgment or, as appropriate,

37、 seek the advice of a competent professional in determining the exercise of reasonable care in any given circumstances. Information and other standards on the topic covered by this publication may be available from other sources, which the user may wish to consult for additional views or information

38、 not covered by this publication. AASHTO, ITE, and NEMA have no power, nor do they undertake to police or enforce compliance with the contents of this document. AASHTO, ITE, and NEMA do not certify, test, or inspect products, designs, or installations for safety or health purposes. Any certification

39、 or other statement of compliance with any health or safety-related information in this document shall not be attributable to AASHTO, ITE, or NEMA and is solely the responsibility of the certifier or maker of the statement. Trademark Notice NTCIP is a trademark of AASHTO / ITE / NEMA. All other mark

40、s mentioned in this standard are the trademarks of their respective owners. NTCIP 1203 v03.05 Page i ACKNOWLEDGEMENTS NTCIP 1203 v03 was prepared by the NTCIP Dynamic Message Sign Working Group (DMS WG), a subdivision of the Joint Committee on the NTCIP. The Joint Committee is organized under a Memo

41、randum of Understanding among the American Association of State Highway and Transportation Officials (AASHTO), the Institute of Transportation Engineers (ITE), and the National Electrical Manufacturers Association (NEMA). The NTCIP development effort is guided by the Joint Committee on the NTCIP, wh

42、ich consists of six representatives from each of the above organizations. When NTCIP 1203 v03 was prepared, the following individuals were active members of the NTCIP DMS WG: Lesly Bien-Aim Russell Brookshire Patrick Chan Felix Cuellar Gene Daigle Terry Haukom Ira Huttner Amit Misra Mark Morse, chai

43、r Peter Ragsdale Robert Rausch Joerg “Nu” Rosenbohm Ken Smith Ken Vaughn Derek Vollmer Other individuals providing input include: Steve Alonge Blake Christie Tom Kurihara In addition to the many volunteer efforts, recognition is also given to those organizations who supported the efforts of the work

44、ing groups by providing comments and funding for the standard, including: Consensus Systems Technologies Daktronics Intelligent Devices, Inc. McCain Minnesota DOT PBS December 2011 ITESoftware Standard; May 2012 NEMAStandard; March 2012 History The first version of NTCIP 1203 was published as NTCIP

45、1203:1997 and was also known as NEMA TS 3.6. In 2001, Amendment 1 was accepted by the Joint Committee on the NTCIP and subsequently Jointly Approved by all three SDOs. The Amendment did not add additional functionality but provided clarifications on object definitions and MULTI tags which have been

46、detected by actual implementations. NTCIP 1203 v02 was developed to reflect lessons learned, to update the document to the new documentation formats, and to add new features such as the colors, graphics, and a 3-tiered equipment management structure. NTCIP 1203 v02 also follows an established system

47、s engineering approach. Several new sections were added to relate user needs identified in a concept of operations, functional requirements, interface specifications and a requirements traceability matrix to the existing sections. This Version 03 of the NTCIP 1203 standard adds test procedures that

48、satisfy the functional requirements that has been provided. These test procedures, provided in Annex C of this standard, allows agencies procuring dynamic message signs to consistently test for conformance to this standard. Minor corrections and clarifications to the standard are also included. All

49、changes are shown and explained in Annex D (Documentation of Revisions) of this standard. User Comment Instructions The term “User Comment” includes any type of written inquiry, comment, question, or proposed revision, from an individual person or organization, about any part of this standards publications content. A “Request for Interpretation” of this standards publication is also classified as a User Comment. User Comments are solicited at any time. In preparation of this NTCIP standards publication, input of users and other interested parties was sought and eval